Hi all I still have some bits and pieces that may be of interest to WLUG members. 2x HP Jetdirect EX Plus Printserver (10Mbit RJ45 + BNC). No PSU, 13VDC, looks like it may be HP proprietary. 1x Axis 550 printserver (10MBit RJ45 + BNC), with psu i think. 1x Axis 83 Device Server. RISC based embedded system, lots of hackability. http://www.lilax.net/textfiles/2003-04-19/axis_82_82_lowres.pdf. 32bit RISC ETRAX 100LX MCM2+8 CPU, 6MB Flash, 16MB ram, dual ethernet, dual rs232 serial, single rs485 serial, USB1.1 port. Lots of support for building custom linux builds to go on here, eg ddwrt. (I've definitely built custom images to go on this system, although I can't find current links to any docs) 2x External modems. Two PSUs that probably go with these, but I'm not sure. 1x 3com Homeconnect DSL Modem. DSL1 only, runs with pppoe back to your host, so it terminates the IP on your machine. No wifi. Dates back to when DSL was first introduced in NZ. Industrial patch cables. 7 x 2m, RJ45 (8P8C) to XP85, and 2x2m XP85 to XP85. XP85 is basically a secure screw fitting around an RJ45/8P8C jack. It looks like this: http://www.alternetivo.cz/industrial-patch-cord-utp-xp85-to-mc5-1-5m-yellow-boot_d19584.html?action=setlng&lngid=1& <http://www.alternetivo.cz/industrial-patch-cord-utp-xp85-to-mc5-1-5m-yellow-boot_d19584.html?action=setlng&lngid=1&> Some old Fibrechannel gear. One Emulex LP8000, which had current driver support (lpfc.ko) in debian lenny at least, and two Compaq Tachyon adapters, which show up on the bus, but don't seem to have active drivers since around 2.6.8. There's still 2.4 kernel support for them however. There's also a pair of Compaq Fibrechannel Hubs. Everything has optical modules, and there's a few fibre patches as well. 2x ISDN cards. Single basic-rate ports I think, I can't recall the name, if you're interested I'll dig them out. 1x 17" CRT monitor, in good condition, works well. All the above is free to whoever wants them, you must pickup from Hillcrest area, or from the CBD during business hours. No guarantee that any of it works. If it doesn't go here, it's going to the new HCC e-waste facility ( http://hamilton.co.nz/page/pageid/2145835076) on or around the 18th. _______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug