I still have some bits and pieces that may be of interest to WLUG
members.
2x HP Jetdirect EX Plus Printserver (10Mbit RJ45 + BNC). No PSU,
13VDC, looks like it may be HP proprietary.
1x Axis 550 printserver (10MBit RJ45 + BNC), with psu i think.
1x Axis 83 Device Server. RISC based embedded system, lots of
hackability.
http://www.lilax.net/textfiles/2003-04-19/axis_82_82_lowres.pdf.
32bit RISC ETRAX 100LX MCM2+8 CPU, 6MB Flash, 16MB ram, dual
ethernet, dual rs232 serial, single rs485 serial, USB1.1 port. Lots
of support for building custom linux builds to go on here, eg ddwrt.
(I've definitely built custom images to go on this system, although
I can't find current links to any docs)
2x External modems. Two PSUs that probably go with these, but I'm
not sure.
1x 3com Homeconnect DSL Modem. DSL1 only, runs with pppoe back to
your host, so it terminates the IP on your machine. No wifi. Dates
back to when DSL was first introduced in NZ.
Some old Fibrechannel gear. One Emulex LP8000, which had current
driver support (lpfc.ko) in debian lenny at least, and two Compaq
Tachyon adapters, which show up on the bus, but don't seem to have
active drivers since around 2.6.8. There's still 2.4 kernel support
for them however. There's also a pair of Compaq Fibrechannel Hubs.
Everything has optical modules, and there's a few fibre patches as
well.
2x ISDN cards. Single basic-rate ports I think, I can't recall the
name, if you're interested I'll dig them out.
1x 17" CRT monitor, in good condition, works well.
All the above is free to whoever wants them, you must pickup from
Hillcrest area, or from the CBD during business hours. No guarantee
that any of it works.