Im actually going through this at the moment, ive had myth working on an old FC2 box, but got rid of it a long time ago as i had problems with my video capture card keeping the audio in synch and the mixer settings changing.. today my new Hauppauge PVR500 arrived.. so far im having trouble getting ivtv setup to recognise it properly.. very close but not there so far. logs below: the problem is at the ivtv: i2c attach to card #0 ok [client=eeprom, addr=50] ivtv warning: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 however i cant work out why this is happening, i have removed all the tveeprom modules normally supplied and replaced them with the ivtv ones.. but cant work it out. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development svn snapshot revision 2668) loading ivtv: Linux version: 2.6.10 preempt 386 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: i2c attach to card #0 ok [client=eeprom, addr=50] ivtv warning: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Create encoder radio stream tuner: tuner type not set ivtv: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: i2c attach to card #1 ok [client=eeprom, addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv warning: i2c client addr: 0x50 not found for command 0x0! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv: Encoder revision: 0x02040011 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: tuner type not set ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== Kyle Carter _____ From: Justin Hyde [mailto:ajh28(a)waikato.ac.nz] Sent: Tuesday, 13 September 2005 11:14 a.m. To: wlug(a)list.waikato.ac.nz Subject: [wlug] mythtv installation day? I am trying to install mythtv on my ubuntu box, but without success, so I need help! I propose a mythtv installation day/evening, but will require some experts to come and help us novels. Are there any locals willing to help and advise? Depending on numbers interested I can host this event at my place, plenty of tables, power points, bbq etc I am thinking of the weekend of the 8th/9th October as that is only a couple of days before my jetstream quota renews itself, so we can blitz the connection and only suffer dial up speeds briefly. Any goers? Cheers Justin Hyde