ivtv: i2c attach to card #0 ok [client=eeprom, addr=50]
ivtv warning: i2c client addr: 0x50 not found for command 0x0!
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not loaded, or
ivtv: the eeprom kernel module was loaded before the tveeprom module.
tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
however i cant work out why this is happening, i have removed all the tveeprom modules normally supplied and replaced them with the ivtv ones.. but cant work it out.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2668) loading
ivtv: Linux version: 2.6.10 preempt 386 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: i2c attach to card #0 ok [client=eeprom, addr=50]
ivtv warning: i2c client addr: 0x50 not found for command 0x0!
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not loaded, or
ivtv: the eeprom kernel module was loaded before the tveeprom module.
tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
TEA5767 detected.
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
type set to 62 (Philips TEA5767HN FM Radio)
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: Could not detect tuner standard, defaulting to NTSC.
ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02040011
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv: Create encoder radio stream
tuner: tuner type not set
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: i2c attach to card #1 ok [client=eeprom, addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv warning: i2c client addr: 0x50 not found for command 0x0!
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not loaded, or
ivtv: the eeprom kernel module was loaded before the tveeprom module.
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02040011
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: tuner type not set
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
Kyle Carter