Hello Chaps I have a non responsive Seagate USB Hard Drive that I am trying to rescue. Under windows, the error message appears that the drive does not have a valid Partition Table. I have tried to get it to be recognized under Linux: glenn(a)glenn:$ mount /dev/hda1 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) usbfs on /proc/bus/usb type usbfs (rw) tmpfs on /lib/modules/2.6.12-9-386/volatile type tmpfs (rw,mode=0755) tmpfs on /dev type tmpfs (rw,size=10M,mode=0755) glenn(a)glenn:~$ cd /proc/bus/usb glenn(a)glenn:/proc/bus/usb$ ls 001 devices glenn(a)glenn:/proc/bus/usb$ cat devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.12-9-386 uhci_hcd S: Product=Intel Corporation 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bc2 ProdID=3000 Rev= 0.00 S: Manufacturer=Seagate S: Product=FreeAgentDesktop S: SerialNumber= 5RY0MBXS C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms glenn(a)glenn:/proc/bus/usb$ Any tips as to how I can mount the drive so I can reformat it with a NTFS file system? Cheers Glenn.