'PINE64's August update included photos of their first prototype for its upcoming Star64 single-board computer, "the first true RISC-V single-board computer from us...but as I wrote last month it certainly isn't the last RISC-V piece of hardware you'll be seeing from us." Just as a short recap: Star64 comes with a StarFive JH7110 64bit CPU sporting quad SiFive FU740 cores clocked at 1.5GHz. The SOC is equipped with BXE-2-32 from Imagination Technologies, which is said to be a solid mid-range GPU. Star64 will be available in two configurations — with 4Gb and 8GB of RAM, similarly to the Quartz64. Both hardware versions include USB 3.0 and a PCIe slot as well as two native Gigabit Ethernet NICs.... Along the long leading edges you'll find PCIe on one end and GPIO on the other. At one end of the board you'll find a digital video output, a double-stacked Gigabit Ethernet port and a 12V barrel plug for power. On the opposite side, you'll find 3x USB 2.0, 1x USB 3.0, an audio jack as well as a power button. There are also two U.FL ports for antennas — one for bluetooth and the other for WiFi.... The Star64 also has an MiPi display output complete with a touch panel (TP) input, a 12V power port, a CSI camera port and an eMMC slot. A micro SD card slot can be found at the bottom of the PCB. Similarly to the RockPro64 and Quartz64, the 12V port on the Star64 can be used for powering other hardware directly from the board — a popular example is powering one or multiple SSDs connected to a PCIe SATA adapter. I'll add that, at least in theory, the Star64 would make a great network-attached storage device because of its SoCs low thermals and idle power. I am looking forward to seeing NAS-focused Linux or BSD* OSes available for the board. Speaking of software, efforts to support the SoC in Linux have already begun. I've been told that both Debian and Fedora are already being ported to the StarFive JH7110, which is great news. We are certain that many other OSes will follow swiftly — especially once we start delivering the Star64 to interested developers. On the subject of availability: the Star64 will be available in a few weeks time, and will initially be available to developers. Given the interest in the Star64's and the SoC powering I hope to see functional distributions available for the board soon after launch. The announcement also included an update on their PinecilV2 smart mini portable soldering iron (built with a 32-bit RISC-V SoC). "The Pinecil V2 landed earlier this month and sold out almost instantly. The next production run of the ought to be available soon however..."' -- source: https://hardware.slashdot.org/story/22/08/28/1759238 Cheers, Peter -- Peter Reutemann Dept. of Computer Science University of Waikato, NZ +64 (7) 858-5174 (office) +64 (7) 577-5304 (home office) https://www.cs.waikato.ac.nz/~fracpete/ http://www.data-mining.co.nz/