The WLUG meeting is on Monday ---------------------------------------------------------------------- ! WLUG Meeting - 25 July 2005 Location: University of Waikato, http://www.wlug.org.nz/LitB Time: 7pm Denise Tyrer-Harding of Pipers (http://www.pipers.co.nz/) is scheduled to speak to the WLUG about IntellectualProperty within New Zealand. Denise is a highly regarded IntellectualProperty lawyer and we look forward to what she has to say.
I have a problem burning Audio CDs in Ubuntu/Gnome. I understand you can no longer use Grub and hdd=ide-scsi to achieve IDE CDROM to look like a SCSI CDROM (I tried it and /dev/hdd disappears). But also insmod ide-scsi insmod: can't read 'ide-scsi': No such file or directory Does not work. I have also tried ln /dev/hdd /dev/pg0 That gives cdrecord -scanbus <snip> cdrecord: Warning: Running on Linux-2.6.10-5-386 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. Using libscg version 'ubuntu-0.8ubuntu1'. cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). scsibus0: 0,0,0 0) 'AOPEN ' 'CD-RW CRW4852 ' '1.00' Removable CD-ROM 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * Which is correct but does not seem to make any difference. I get lsmod Module Size Used by ipv6 229504 8 proc_intf 4100 0 freq_table 4100 0 cpufreq_userspace 4572 0 cpufreq_ondemand 6172 0 cpufreq_powersave 1920 0 video 16260 0 sony_acpi 6280 0 pcc_acpi 11264 0 button 6800 0 battery 10244 0 container 4608 0 ac 4996 0 via_rhine 19972 0 mii 4736 1 via_rhine tsdev 7488 0 snd_via82xx 25248 2 snd_ac97_codec 64608 1 snd_via82xx snd_mpu401_uart 7168 1 snd_via82xx snd_rawmidi 22944 1 snd_mpu401_uart snd_seq_device 8332 1 snd_rawmidi i2c_viapro 7436 0 via_ircc 24340 0 irda 168000 1 via_ircc crc_ccitt 2176 1 irda ehci_hcd 29444 0 usbhid 29376 0 usblp 12032 0 uhci_hcd 30224 0 usbcore 107384 5 ehci_hcd,usbhid,usblp,uhci_hcd snd_bt87x 12612 0 snd_pcm_oss 47652 1 snd_mixer_oss 16768 2 snd_pcm_oss snd_pcm 84872 4 snd_via82xx,snd_ac97_codec,snd_bt87x,snd_pcm_oss snd_timer 23300 1 snd_pcm snd 50276 10 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_bt87x,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 9824 3 snd snd_page_alloc 9604 3 snd_via82xx,snd_bt87x,snd_pcm bttv 142928 0 video_buf 20484 1 bttv firmware_class 9728 1 bttv i2c_algo_bit 9224 1 bttv v4l2_common 5888 1 bttv btcx_risc 4744 1 bttv i2c_core 21264 3 i2c_viapro,bttv,i2c_algo_bit videodev 9728 1 bttv shpchp 86116 0 pci_hotplug 30512 1 shpchp via_agp 9216 1 agpgart 31784 1 via_agp pcspkr 3816 0 rtc 12216 0 analog 10784 0 gameport 4608 2 snd_via82xx,analog floppy 54864 0 nls_iso8859_1 4224 2 nls_cp437 5888 2 vfat 12928 2 fat 37792 1 vfat md 43856 0 dm_mod 53116 1 evdev 9088 0 capability 5000 0 commoncap 7808 1 capability psmouse 19336 0 mousedev 11160 1 parport_pc 34372 1 lp 10792 0 parport 33480 2 parport_pc,lp ide_cd 38532 0 cdrom 36508 1 ide_cd ext3 120968 1 jbd 54168 1 ext3 ide_generic 1664 0 via82cxxx 12956 1 ide_disk 18176 6 ide_core 118988 4 ide_cd,ide_generic,via82cxxx,ide_disk unix 26164 769 thermal 13576 0 processor 22708 1 thermal fan 4612 0 fbcon 34048 0 font 8448 1 fbcon bitblit 5120 1 fbcon vesafb 6948 0 cfbcopyarea 3968 1 vesafb cfbimgblt 3072 1 vesafb cfbfillrect 3584 1 vesafb I do not see SCSI (only IDE) in lsmod even after creating ln /dev/hdd /dev/pg0 Using Command Line or Gnome Baker, I burn and Audio CD and only get a couple of tracks then it bombs out. I can burn Data CDs OK. I have searched the WLUG Wiki and Google for the last three weeks, but am yet to find out what I am missing. It is probably something blindingly obvious, but I am yet to see the light! Any help really appreciated as this is my last problem in Using Ubuntu. TIA Bill PS I have the same problem on my Desktop and Notebook BTW tried cdrecord -v speed=2 dev=0,0 -audio -pad -eject /tmp/GnomeBaker/leftfieldnz/create_audiocd/*.wav cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <cdrtools(a)packages.debian.org>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.10-5-386 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 0 = CD-DA scsidev: '0,0' scsibus: 0 target: 0 lun: 0 Using libscg version 'ubuntu-0.8ubuntu1'. cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 32768 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW4852 ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB Track 01: audio 27 MB (02:45.38) no preemp pad Track 02: audio 26 MB (02:36.26) no preemp pad Track 03: audio 27 MB (02:45.30) no preemp pad Track 04: audio 29 MB (02:56.74) no preemp pad Track 05: audio 29 MB (02:57.65) no preemp pad Track 06: audio 30 MB (02:59.12) no preemp pad Track 07: audio 27 MB (02:44.41) no preemp pad Track 08: audio 26 MB (02:34.85) no preemp pad Track 09: audio 28 MB (02:48.20) no preemp pad Track 10: audio 28 MB (02:49.97) no preemp pad Track 11: audio 26 MB (02:38.90) no preemp pad Track 12: audio 26 MB (02:34.77) no preemp pad Track 13: audio 24 MB (02:25.21) no preemp pad Track 14: audio 26 MB (02:38.98) no preemp pad Track 15: audio 7 MB (00:42.88) no preemp pad Track 16: audio 0 MB (00:00.00) no preemp swab pad Track 17: audio 0 MB (00:00.00) no preemp swab pad Track 18: audio 0 MB (00:00.00) no preemp swab pad Track 19: audio 0 MB (00:00.00) no preemp swab pad Track 20: audio 0 MB (00:00.00) no preemp swab pad Total size: 403 MB (39:56.80) = 179760 sectors Lout start: 403 MB (39:58/60) = 179760 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable ATIP start of lead in: -11674 (97:26/26) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 23 Manufacturer: SKC Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 180088 Forcespeed is OFF. Starting to write CD/DVD at speed 2 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Performing OPC... Starting new track at sector: 0 Track 01: 27 of 27 MB written (fifo 98%) [buf 67%] 23.0x. WARNING: padding up to secsize. Track 01: Total bytes read/written: 29173248/29174208 (12404 sectors). Starting new track at sector: 12556 Track 02: 19 of 26 MB written (fifo 97%) [buf 4%] 23.2x.cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 52 D1 00 00 0D 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 52 D6 0C 00 00 00 00 10 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0 Sense flags: Blk 21206 (valid) cmd finished after 0.012s timeout 40s write track data: error after 20333040 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 28.519s Average write speed 116.6x. Min drive buffer fill was 4% Total of 1 possible drive buffer underruns predicted. Fixating... Fixating time: 16.270s cdrecord: fifo had 1748 puts and 1621 gets. cdrecord: fifo was 0 times empty and 292 times full, min fill was 96%. ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
Bill Rosoman wrote:
I have a problem burning Audio CDs in Ubuntu/Gnome.
I understand you can no longer use Grub and hdd=ide-scsi to achieve IDE CDROM to look like a SCSI CDROM (I tried it and /dev/hdd disappears).
You don't need to make an IDE CDROM look like a SCSI CDROM any more. Since the 2.6.0 kernel, linux has supported native ATAPI cdwriting. K3b supports this quite nicely, I've not used other gui based cdwriters recently, but I'm sure they all support it. To find the device, use: *cdrecord dev=ATA: -scanbus* http://www.wlug.org.nz/CDWritingNotes has more notes on this
Ok making some progress. So I have installed eroaster as suggested in WIKI. Works fine, converts mp3 to wav, but then does not burn? Can not find a Howto as to how you actually burn the Audio CD after converting to wav! also installed latest cdrecord (cdrtools) v 2.01 TIA Bill __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Anyone know which of the many libraries for handling large numbers (like 1MB sized numbers) I should use and can be used with both gcc and MS c++?? Shane.
Shane Taylor wrote:
Anyone know which of the many libraries for handling large numbers (like 1MB sized numbers) I should use and can be used with both gcc and MS c++??
GMP, the GNU Multi-Precision Library, is the obvious answer to the first part of your question. Its website is at http://www.swox.com/gmp/. A quick google shows that it is possible to build under windows, and there are prebuilt libraries for Visual C++ available: http://www.cs.nyu.edu/exact/core/gmp/
Bill Rosoman wrote:
Ok making some progress.
So I have installed eroaster as suggested in WIKI. Works fine, converts mp3 to wav, but then does not burn?
Can not find a Howto as to how you actually burn the Audio CD after converting to wav!
also installed latest cdrecord (cdrtools) v 2.01
TIA Bill
I found the following on the website http://cubeman.org/linuxnotes.txt ... cdrecord -v -dev=1,0,0 speed=1 -dao -pad -useinfo track-01.wav ... make audio cd from wav file(s) (I used cdrecord -v -dev=/dev/cdwriter speed=1 -dao -pad -useinfo track-01.wav ) Michael
cdrecord error I tried this to burn and Audio CD cdrecord -v -dev=/dev/cdrw speed=1 -audio -pad -eject -useinfo -dao /tmp/eroaster/*.wav And this was the result, burn 3 tracks then died Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <cdrtools(a)packages.debian.org>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.10-5-386 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 0 = CD-DA scsidev: '/dev/cdrw' devname: '/dev/cdrw' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'ubuntu-0.8ubuntu1'. cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW4852 ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 27 MB (02:45.38) no preemp pad Track 02: audio 26 MB (02:36.26) no preemp pad Track 03: audio 27 MB (02:45.30) no preemp pad Track 04: audio 29 MB (02:56.74) no preemp pad Track 05: audio 29 MB (02:57.65) no preemp pad Track 06: audio 30 MB (02:59.12) no preemp pad Track 07: audio 27 MB (02:44.41) no preemp pad Track 08: audio 26 MB (02:34.85) no preemp pad Track 09: audio 28 MB (02:48.20) no preemp pad Track 10: audio 28 MB (02:49.97) no preemp pad Track 11: audio 26 MB (02:38.90) no preemp pad Track 12: audio 26 MB (02:34.77) no preemp pad Track 13: audio 24 MB (02:25.21) no preemp pad Track 14: audio 26 MB (02:38.98) no preemp pad Track 15: audio 28 MB (02:47.23) no preemp pad Track 16: audio 24 MB (02:25.52) no preemp pad Track 17: audio 25 MB (02:30.98) no preemp pad Track 18: audio 27 MB (02:45.77) no preemp pad Track 19: audio 26 MB (02:35.84) no preemp pad Track 20: audio 27 MB (02:41.88) no preemp pad Total size: 545 MB (54:03.20) = 243240 sectors Lout start: 545 MB (54:05/15) = 243240 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable ATIP start of lead in: -11674 (97:26/26) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 23 Manufacturer: SKC Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 116608 Forcespeed is OFF. Starting to write CD/DVD at speed 1 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 27 of 27 MB written (fifo 98%) [buf 96%] 24.9x. WARNING: padding up to secsize. Track 01: Total bytes read/written: 29173248/29174208 (12404 sectors). Starting new track at sector: 12404 Track 02: 26 of 26 MB written (fifo 98%) [buf 96%] 25.6x. WARNING: padding up to secsize. Track 02: Total bytes read/written: 27565056/27565440 (11720 sectors). Starting new track at sector: 24124 Track 03: 27 of 27 MB written (fifo 98%) [buf 92%] 27.9x. WARNING: padding up to secsize. Track 03: Total bytes read/written: 29159424/29160096 (12398 sectors). Starting new track at sector: 36522 Track 04: 29 of 29 MB written (fifo 96%) [buf 7%] 27.5x. WARNING: padding up to secsize. Track 04: Total bytes read/written: 31177728/31178112 (13256 sectors). Starting new track at sector: 49778 Track 05: 0 of 29 MB written.cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 C3 14 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 05 00 00 00 00 0C 00 00 00 00 10 02 00 00 Sense Key: 0x5 Illegal Request, deferred error, Segment 0 Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 16.366s timeout 200s write track data: error after 381024 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 64.451s Average write speed 57.9x. Min drive buffer fill was 7% Fixating... Fixating time: 0.003s cdrecord: fifo had 1916 puts and 1853 gets. cdrecord: fifo was 0 times empty and 398 times full, min fill was 92%. What have I done wrong??????????????????? TIA Bill cdrecord error I tried this to burn and Audio CD cdrecord -v -dev=/dev/cdrw speed=1 -audio -pad -eject -useinfo -dao /tmp/eroaster/*.wav And this was the result, burn 3 tracks then died Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an unofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <cdrtools(a)packages.debian.org>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.10-5-386 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 0 = CD-DA scsidev: '/dev/cdrw' devname: '/dev/cdrw' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'ubuntu-0.8ubuntu1'. cdrecord: Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'AOPEN ' Identifikation : 'CD-RW CRW4852 ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 27 MB (02:45.38) no preemp pad Track 02: audio 26 MB (02:36.26) no preemp pad Track 03: audio 27 MB (02:45.30) no preemp pad Track 04: audio 29 MB (02:56.74) no preemp pad Track 05: audio 29 MB (02:57.65) no preemp pad Track 06: audio 30 MB (02:59.12) no preemp pad Track 07: audio 27 MB (02:44.41) no preemp pad Track 08: audio 26 MB (02:34.85) no preemp pad Track 09: audio 28 MB (02:48.20) no preemp pad Track 10: audio 28 MB (02:49.97) no preemp pad Track 11: audio 26 MB (02:38.90) no preemp pad Track 12: audio 26 MB (02:34.77) no preemp pad Track 13: audio 24 MB (02:25.21) no preemp pad Track 14: audio 26 MB (02:38.98) no preemp pad Track 15: audio 28 MB (02:47.23) no preemp pad Track 16: audio 24 MB (02:25.52) no preemp pad Track 17: audio 25 MB (02:30.98) no preemp pad Track 18: audio 27 MB (02:45.77) no preemp pad Track 19: audio 26 MB (02:35.84) no preemp pad Track 20: audio 27 MB (02:41.88) no preemp pad Total size: 545 MB (54:03.20) = 243240 sectors Lout start: 545 MB (54:05/15) = 243240 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable ATIP start of lead in: -11674 (97:26/26) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 23 Manufacturer: SKC Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 116608 Forcespeed is OFF. Starting to write CD/DVD at speed 1 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 27 of 27 MB written (fifo 98%) [buf 96%] 24.9x. WARNING: padding up to secsize. Track 01: Total bytes read/written: 29173248/29174208 (12404 sectors). Starting new track at sector: 12404 Track 02: 26 of 26 MB written (fifo 98%) [buf 96%] 25.6x. WARNING: padding up to secsize. Track 02: Total bytes read/written: 27565056/27565440 (11720 sectors). Starting new track at sector: 24124 Track 03: 27 of 27 MB written (fifo 98%) [buf 92%] 27.9x. WARNING: padding up to secsize. Track 03: Total bytes read/written: 29159424/29160096 (12398 sectors). Starting new track at sector: 36522 Track 04: 29 of 29 MB written (fifo 96%) [buf 7%] 27.5x. WARNING: padding up to secsize. Track 04: Total bytes read/written: 31177728/31178112 (13256 sectors). Starting new track at sector: 49778 Track 05: 0 of 29 MB written.cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 C3 14 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 05 00 00 00 00 0C 00 00 00 00 10 02 00 00 Sense Key: 0x5 Illegal Request, deferred error, Segment 0 Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 16.366s timeout 200s write track data: error after 381024 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 64.451s Average write speed 57.9x. Min drive buffer fill was 7% Fixating... Fixating time: 0.003s cdrecord: fifo had 1916 puts and 1853 gets. cdrecord: fifo was 0 times empty and 398 times full, min fill was 92%. What have I done wrong??????????????????? TIA Bill ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
--- Craig Box <craig(a)dubculture.co.nz> wrote:
Bill Rosoman wrote:
cdrecord error I tried this to burn and Audio CD
Seen gnomebaker?
sudo apt-get install gnomebaker
Craig
Sure I have gnomebaker and eroaster running fine. Gnomebaker converts to wav then burns a couple of tracks then dies. Eroaster converts to wav but does not want to burn, despite recognising my CD Burner. So something is wrong in what I am doing or in the way it is setup! Bill __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Sure I have gnomebaker and eroaster running fine. Gnomebaker converts to wav then burns a couple of tracks then dies.
Eroaster converts to wav but does not want to burn, despite recognising my CD Burner.
So something is wrong in what I am doing or in the way it is setup!
Seeing as we have a meeting tomorrow, it might pay to bring it along to the meeting, wait for one expert to volunteer, and try and have them look at it for you. (If you open a problem up to too many experts then you will end up with people telling you how to do things 20 different ways and often do not get your original problem solved!) Craig
Bill Rosoman wrote:
cdrecord error I tried this to burn and Audio CD
cdrecord -v -dev=/dev/cdrw speed=1 -audio -pad -eject -useinfo -dao /tmp/eroaster/*.wav [snip]
And this was the result, burn 3 tracks then died write track data: error after 381024 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 64.451s Average write speed 57.9x. Min drive buffer fill was 7% Fixating... Fixating time: 0.003s cdrecord: fifo had 1916 puts and 1853 gets. cdrecord: fifo was 0 times empty and 398 times full, min fill was 92%.
What have I done wrong???????????????????
Very late in the thread I know, but do you have sufficient space in your /tmp directory?? I was getting these kinds of coasters from my MDK system which where eventually solved by making (much) more space availble for /tmp. John
participants (7)
-
Bill Rosoman -
Craig Box -
Daniel Lawson -
John Rye -
Meeting Reminder bot -
Michael McDonald -
Shane Taylor