An after thought, before I do any more I thought maybe I should post the outcome of lspci and dmesg Here goes: Dmesg john(a)itchy:~$ dmesg data, 136k init) [ 17.261034] Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152) [ 17.284078] Security Framework v1.0.0 initialized [ 17.284083] SELinux: Disabled at boot. [ 17.284095] Mount-cache hash table entries: 256 [ 17.284179] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.284183] CPU: L2 Cache: 1024K (64 bytes/line) [ 17.284188] CPU: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02 [ 17.284297] checking if image is initramfs... it is [ 17.700435] ACPI: Looking for DSDT in initrd... not found! [ 17.796177] not found! [ 17.813320] Using local APIC timer interrupts. [ 17.875823] Detected 12.500 MHz APIC timer. [ 17.875834] testing NMI watchdog ... OK. [ 17.885964] NET: Registered protocol family 16 [ 17.885991] ACPI: bus type pci registered [ 17.885998] PCI: Using configuration type 1 [ 17.886001] mtrr: v2.0 (20020519) [ 17.886313] ACPI: Subsystem revision 20050729 [ 17.888052] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 17.888061] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 17.888729] ACPI: Interpreter enabled [ 17.888732] ACPI: Using IOAPIC for interrupt routing [ 17.888994] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.888997] PCI: Probing PCI hardware (bus 00) [ 17.889039] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 17.890576] Uncovering SIS963 that hid as a SIS503 (compatible=0) [ 17.890609] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 [ 17.890966] Boot video device is 0000:01:00.0 [ 17.897612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.898572] burst-mode-ec-10-Aug [ 17.898575] ACPI: Embedded Controller [EC0] (gpe 25) [ 17.916095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) [ 17.916292] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) [ 17.916498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) [ 17.916691] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) [ 17.916904] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) [ 17.917105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) [ 17.917314] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 17.917509] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) [ 17.917819] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.917826] pnp: PnP ACPI init [ 17.918563] pnp: PnP ACPI: found 7 devices [ 17.918634] usbcore: registered new driver usbfs [ 17.918654] usbcore: registered new driver hub [ 17.918682] PCI: Using ACPI for IRQ routing [ 17.918686] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.918752] PCI-DMA: Disabling IOMMU. [ 17.918865] pnp: 00:03: ioport range 0x8000-0x807f could not be reserved [ 17.918869] pnp: 00:03: ioport range 0x8080-0x80ff has been reserved [ 17.918873] pnp: 00:03: ioport range 0x8100-0x811f has been reserved [ 17.918877] pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 17.919095] Simple Boot Flag at 0x38 set to 0x1 [ 17.919179] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 17.919371] audit: initializing netlink socket (disabled) [ 17.919379] audit: initialized [ 17.919480] VFS: Disk quotas dquot_6.5.1 [ 17.919498] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.919530] devfs: 2004-01-31 Richard Gooch (rgooch(a)atnf.csiro.au) [ 17.919535] devfs: boot_options: 0x0 [ 17.919561] Initializing Cryptographic API [ 17.936206] Linux agpgart interface v0.101 (c) Dave Jones [ 17.936274] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 17.941054] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.941268] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.941274] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 17.943021] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.943029] ACPI: PCI interrupt for device 0000:00:02.6 disabled [ 17.943042] io scheduler noop registered [ 17.943056] io scheduler anticipatory registered [ 17.943062] io scheduler deadline registered [ 17.943071] io scheduler cfq registered [ 17.943370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.943440] NET: Registered protocol family 2 [ 17.953039] IP: routing cache hash table of 4096 buckets, 32Kbytes [ 17.953248] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 17.953433] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 17.953641] TCP: Hash tables configured (established 16384 bind 16384) [ 17.953702] NET: Registered protocol family 8 [ 17.953705] NET: Registered protocol family 20 [ 17.953910] ACPI wakeup devices: [ 17.953912] PCI0 LAN MODM USB0 USB1 USB2 USB3 [ 17.953917] ACPI: (supports S0 S3 S4 S5) [ 17.954141] Freeing unused kernel memory: 136k freed [ 17.971457] vga16fb: initializing [ 17.971462] vga16fb: mapped to 0xffff8100000a0000 [ 18.049675] Console: switching to colour frame buffer device 80x30 [ 18.049681] fb0: VGA16 VGA frame buffer device [ 18.061077] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 19.105760] Capability LSM initialized [ 19.114428] NET: Registered protocol family 1 [ 19.123475] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.123488] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.123492] ACPI: bus type ide registered [ 19.131811] SIS5513: IDE controller at PCI slot 0000:00:02.5 [ 19.131827] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.131846] SIS5513: chipset revision 0 [ 19.131848] SIS5513: not 100% native mode: will probe irqs later [ 19.131859] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 19.131872] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio [ 19.131884] ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio [ 19.131895] Probing IDE interface ide0... [ 19.394924] hda: ST9402113A, ATA DISK drive [ 20.007078] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.007132] Probing IDE interface ide1... [ 20.678800] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 20.984628] ide1 at 0x170-0x177,0x376 on irq 15 [ 20.984707] Probing IDE interface ide2... [ 21.497557] Probing IDE interface ide3... [ 22.009496] Probing IDE interface ide4... [ 22.521436] Probing IDE interface ide5... [ 23.036642] hda: max request size: 1024KiB [ 23.037045] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 23.037170] hda: cache flushes supported [ 23.037226] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 > [ 23.086206] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 23.086214] Uniform CD-ROM driver Revision: 3.20 [ 23.340462] Attempting manual resume [ 23.340679] swsusp: Suspend partition has wrong signature? [ 23.372270] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 23.372309] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 23.372337] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller [ 23.575498] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 23.575509] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000 [ 23.626399] hub 1-0:1.0: USB hub found [ 23.626411] hub 1-0:1.0: 3 ports detected [ 23.627320] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 23.627330] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) [ 23.829876] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 23.829884] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000 [ 23.880354] hub 2-0:1.0: USB hub found [ 23.880364] hub 2-0:1.0: 3 ports detected [ 23.891522] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 23 [ 23.891539] ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0 Controller [ 23.891582] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 23.891593] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000 [ 23.891624] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 23.891632] ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 23.891710] hub 3-0:1.0: USB hub found [ 23.891718] hub 3-0:1.0: 6 ports detected [ 23.918501] sis900.c: v1.08.08 Jan. 22 2005 [ 23.918542] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.923419] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. [ 23.929581] 0000:00:04.0: Using transceiver found at address 13 as default [ 23.930245] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:10:f1:c4. [ 26.263405] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 26.267322] ACPI: Thermal Zone [THRM] (53 C) [ 26.408621] Attempting manual resume [ 26.432267] swsusp: Suspend partition has wrong signature? [ 26.460318] kjournald starting. Commit interval 5 seconds [ 26.460331] EXT3-fs: mounted filesystem with ordered data mode. [ 28.026878] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 31.145850] Adding 1108444k swap on /dev/hda5. Priority:-1 extents:1 [ 31.387234] EXT3 FS on hda2, internal journal [ 38.879486] lp: driver loaded but no devices found [ 38.898286] mice: PS/2 mouse device common for all mice [ 38.932627] Real Time Clock Driver v1.12 [ 39.527225] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 39.529223] input: SynPS/2 Synaptics TouchPad on isa0060/serio1 [ 40.131504] ts: Compaq touchscreen protocol output [ 41.788857] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel(a)redhat.com [ 43.211270] cdrom: open failed. [ 45.531310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.541929] shpchp: shpc_init : shpc_cap_offset == 0 [ 45.541940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.969722] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 46.527630] intel8x0_measure_ac97_clock: measured 49483 usecs [ 46.527634] intel8x0: clocking to 48000 [ 46.972627] Linux Kernel Card Services [ 46.972631] options: [pci] [cardbus] [pm] [ 46.984682] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [ 46.984691] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 46.984705] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083] [ 46.984734] Yenta: Using CSCINT to route CSC interrupts to PCI [ 46.984737] Yenta: Routing CardBus interrupts to PCI [ 46.984741] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 [ 47.206247] Yenta: ISA IRQ mask 0x06f8, PCI irq 19 [ 47.206251] Socket status: 30000007 [ 48.864634] input: PC Speaker [ 49.649609] eth0: Media Link Off [ 49.658301] NET: Registered protocol family 17 [ 116.390981] ACPI: AC Adapter [ACAD] (on-line) [ 116.444498] ACPI: Battery Slot [BAT1] (battery present) [ 116.460156] ACPI: Power Button (FF) [PWRF] [ 116.460184] ACPI: Lid Switch [LID] [ 116.460192] ACPI: Power Button (CM) [PWRB] [ 116.460198] ACPI: Sleep Button (CM) [SLPB] [ 116.547487] ibm_acpi: ec object not found [ 118.041331] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 118.041341] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 118.041348] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 118.062068] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 118.062075] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 118.062081] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 129.054049] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) [ 129.054507] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV) [ 129.054513] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) [ 129.054724] cpu_init done, current fid 0x8, vid 0x4 [ 129.216366] Bluetooth: Core ver 2.7 [ 129.216376] NET: Registered protocol family 31 [ 129.216380] Bluetooth: HCI device and connection manager initialized [ 129.216393] Bluetooth: HCI socket layer initialized [ 129.228916] Bluetooth: L2CAP ver 2.7 [ 129.228921] Bluetooth: L2CAP socket layer initialized [ 129.250292] Bluetooth: RFCOMM ver 1.5 [ 129.250302] Bluetooth: RFCOMM socket layer initialized [ 129.250319] Bluetooth: RFCOMM TTY layer initialized [ 137.406154] NET: Registered protocol family 10 [ 137.406243] Disabled Privacy Extensions on device ffffffff8035a5a0(lo) [ 137.406390] IPv6 over IPv4 tunneling driver [ 139.401887] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 139.401898] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 139.401906] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 142.674177] eth0: no IPv6 routers present [ 154.400860] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 154.400870] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 154.400878] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 169.401744] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 169.401754] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 169.401763] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 184.402548] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 184.402558] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 184.402566] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 199.403450] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 199.403461] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 199.403469] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 214.404418] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 214.404428] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 214.404437] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 229.405300] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 229.405310] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 229.405318] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 244.405340] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 244.405350] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 244.405357] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 259.406938] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 259.406949] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 259.406957] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND john(a)itchy:~$ Then lspci john(a)itchy:~$ lspci 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03 ) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media I O] (rev 25) 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 91) 0000:00:06.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controlle r 0000:00:0b.0 Network controller: Broadcom Corporation: Unknown device 4318 (rev 02) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M 661FX/M661MX/741/M741/760/M760 PCI/AGP john(a)itchy:~$ Maybe I need to fix up this stuff first ?????? John.. ----- Original Message Follows -----
I am now completely stuck. If I redo everything will it cause a further problem for me??? John
----- Original Message Follows -----
The Gui Does not work it goes into permanently enabling mode
I down loaded acer_acpi-0.3 Then: make make install.
john(a)itchy:~$ sudo modprobe acer_acpi Password: FATAL: Error inserting acer_acpi
(/lib/modules/2.6.12-9-amd64-generic/extra/acer_acpi.ko):
No such device john(a)itchy:~$
-- Try configuring your network now under somewhere like desktop, administration, networking.
If you want to use WPA you will also need to install wpa_supplicant. Otherwise hopefully it will work!
There is another way (download 2.6.17 test version) to do it if ndiswrapper doesn't work but try that first.
Ian -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand
_______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
_______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
On 4/17/06, jaytee(a)clear.net.nz <jaytee(a)clear.net.nz> wrote:
An after thought, before I do any more I thought maybe I should post the outcome of lspci and dmesg
OK. Maybe it's time to try an alternative approach! Support for these cards will be in Linux 2.6.17 in a much better format. Until now wireless in Linux has been a real mess. There seems to be an effort to really tidy it up now though. What you can do is download the latest test version from http://kernel.org. It will be 2.6.17-rcx-gity where x and y are some number (currently 1 and 12 at time of writing). Build this kernel and install. You will need to read this file for additional instructions: Documentation/networking/bcm43xx.txt If you're not sure how to build a kernel and install please say so and I will find instructions. Just can't find a good one right now! Ian -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand
I've made a bunch of video clips using my Canon A75 camera.. they seem to be mjpeg format with 8-bit 11khz ulaw audio. Does anybody know of any program in Linux that would let me edit these or convert them to a more standard format. kino can't import them. transcode fails after this: [transcode] warning : /usr/lib/transcode/import_ffmpeg.so: undefined symbol: dts_init mencoder will turn the video into divx, but can't convert 8 bit ulaw to mp3 or aac.
zcat wrote:
I've made a bunch of video clips using my Canon A75 camera.. they seem to be mjpeg format with 8-bit 11khz ulaw audio. Does anybody know of any program in Linux that would let me edit these or convert them to a more standard format.
kino can't import them.
transcode fails after this: [transcode] warning : /usr/lib/transcode/import_ffmpeg.so: undefined symbol: dts_init
mencoder will turn the video into divx, but can't convert 8 bit ulaw to mp3 or aac.
I just started looking at diva to package up for Fedora Extras, www.diva-project.org It's a mono/gstreamer video editing app.. might be useful ? Michael
zcat wrote:
I just started looking at diva to package up for Fedora Extras,
www.diva-project.org
It's a mono/gstreamer video editing app.. might be useful ?
I'll see if I can figure it out..
Would you consider packaging it for Ubuntu as well?
I wouldn't know the first about packaging .debs nor do I have a debian/ubuntu system :-/ A dude I work with is a debian dev, I will ask him to have a look and see if it will take much. Michael
Dont know if it can handle it, and its not exactly linux. But Linux friendly But it will give you something to try http://www.eyespot.com/ Maybe Ajax can help, I have no idea what video/audio they can handle, Its just something else I saw on my net travels one wet day But if it accepts the video and audio, maybe you can save the output in a form that kino can handle. Otherwise I'd be happy to convert these on the macs for you. I'm sure one of our converters can help Also Just occurred to me did you try VLC videolan client, If it can play it, it would be able to convert it too
zcat wrote:
I've made a bunch of video clips using my Canon A75 camera.. they seem to be mjpeg format with 8-bit 11khz ulaw audio. Does anybody know of any program in Linux that would let me edit these or convert them to a more standard format.
Use open file to open them. at the bottom on the MRL window there is a stream option. Tick it and press settings choose file output, then set encapsulation and video and audio settings and transcode away You might have to play with some options until you get a setting stream it can handle, but it converts just about everything eventually Sorry if the Linux layout is slightly different, I used the mac version to write this note, BUt it should be pretty damn close In short you stream the output to a file and all going well you will have a more standard stream On 18/04/2006, at 12:21 PM, zcat wrote:
Also Just occurred to me did you try VLC videolan client, If it can play it, it would be able to convert it too
vlc plays them (so does mplayer) but how do I convert them?
_______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
participants (5)
-
Gavin Denby -
Ian McDonald -
jaytee＠clear.net.nz -
Michael J Knox -
zcat