Hey Daniel Thanks for the great advise on ic/ppp settings. I had my old win 98 machine that I do my maths work on and it had a modem, so i thought id give it a bash with your instructions in your emails. I had to consult a website http://www.annoyances.org/exec/show/ics98, turns out that I had to install netBEUI and install ICS from the win 98 add new programs menu, but once that was done, my linux acer and my linux dell both had good connections. I had to remove the static IP address in my Vista machines network card settings, but once i had, it connected too. So thank you for all your help, and to the other members of WLUG who helped me out. Now I have to find an old PCMCIA network card for my old Dell 133 Laptop, or a serial network connection if there is such a thing Cheers all Glenn.
Glenn Stuart Morrissey wrote:
Hey Daniel
Thanks for the great advise on ic/ppp settings. I had my old win 98 machine that I do my maths work on and it had a modem, so i thought id give it a bash with your instructions in your emails. I had to consult a website http://www.annoyances.org/exec/show/ics98, turns out that I had to install netBEUI and install ICS from the win 98 add new programs menu, but once that was done, my linux acer and my linux dell both had good connections. I had to remove the static IP address in my Vista machines network card settings, but once i had, it connected too. So thank you for all your help, and to the other members of WLUG who helped me out.
That's ok. As a suggestion for a future project, you could install linux on an older computer (probably best to not install X, and you might take it as a chance to try a different distribution), and set it up as a router and firewall. Some of the "magic" has gone from this these days, as there are plenty of distributions that are oriented towards doing this.
Now I have to find an old PCMCIA network card for my old Dell 133 Laptop, or a serial network connection if there is such a thing
$20 on trademe will get you a pcmcia 10/100 ethernet card. Be careful of what you get, a lot of them need a small custom cable (commonly called a dongle) that connects to the card and provides a physical RJ45 port, and these can either be missing completely, or damaged - so get a card that has a built-in rj45 port
EDay = BAD. This is the 3rd? time since that I could have passed on something I tossed. On Mon, Nov 10, 2008 at 10:31 AM, Daniel Lawson <daniel(a)meta.net.nz> wrote:
Glenn Stuart Morrissey wrote:
Hey Daniel
Thanks for the great advise on ic/ppp settings. I had my old win 98 machine that I do my maths work on and it had a modem, so i thought id give it a bash with your instructions in your emails. I had to consult a website http://www.annoyances.org/exec/show/ics98, turns out that I had to install netBEUI and install ICS from the win 98 add new programs menu, but once that was done, my linux acer and my linux dell both had good connections. I had to remove the static IP address in my Vista machines network card settings, but once i had, it connected too. So thank you for all your help, and to the other members of WLUG who helped me out.
That's ok.
As a suggestion for a future project, you could install linux on an older computer (probably best to not install X, and you might take it as a chance to try a different distribution), and set it up as a router and firewall. Some of the "magic" has gone from this these days, as there are plenty of distributions that are oriented towards doing this.
Now I have to find an old PCMCIA network card for my old Dell 133 Laptop, or a serial network connection if there is such a thing
$20 on trademe will get you a pcmcia 10/100 ethernet card. Be careful of what you get, a lot of them need a small custom cable (commonly called a dongle) that connects to the card and provides a physical RJ45 port, and these can either be missing completely, or damaged - so get a card that has a built-in rj45 port _______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
on that note, i have alot of old kit (i dont know if this is the right place to say so, if not someone tell me where) sort of pentium 1ish some newer some older, more keyboards then you can shake a stick at (over every flavour, mostly ps2) and a hord of jsut other general junk, i am happy to give it away to anyone who wants it, either as a whole big pile, or piece meal if there is something specific you are hunting for, all tallied up there is easy a big van full.. (i mean hord) so, if anyone out there is keen, let me know, also if you contact me i can give you a better idea what is there Cheers On Mon, Nov 10, 2008 at 10:56 AM, Darryn Brooking <gible(a)gible.net> wrote:
EDay = BAD. This is the 3rd? time since that I could have passed on something I tossed.
On Mon, Nov 10, 2008 at 10:31 AM, Daniel Lawson <daniel(a)meta.net.nz>wrote:
Glenn Stuart Morrissey wrote:
Hey Daniel
Thanks for the great advise on ic/ppp settings. I had my old win 98 machine that I do my maths work on and it had a modem, so i thought id give it a bash with your instructions in your emails. I had to consult a website http://www.annoyances.org/exec/show/ics98, turns out that I had to install netBEUI and install ICS from the win 98 add new programs menu, but once that was done, my linux acer and my linux dell both had good connections. I had to remove the static IP address in my Vista machines network card settings, but once i had, it connected too. So thank you for all your help, and to the other members of WLUG who helped me out.
That's ok.
As a suggestion for a future project, you could install linux on an older computer (probably best to not install X, and you might take it as a chance to try a different distribution), and set it up as a router and firewall. Some of the "magic" has gone from this these days, as there are plenty of distributions that are oriented towards doing this.
Now I have to find an old PCMCIA network card for my old Dell 133 Laptop, or a serial network connection if there is such a thing
$20 on trademe will get you a pcmcia 10/100 ethernet card. Be careful of what you get, a lot of them need a small custom cable (commonly called a dongle) that connects to the card and provides a physical RJ45 port, and these can either be missing completely, or damaged - so get a card that has a built-in rj45 port _______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
_______________________________________________ wlug mailing list | wlug(a)list.waikato.ac.nz Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug
participants (4)
-
Andrew Crosby -
Daniel Lawson -
Darryn Brooking -
Glenn Stuart Morrissey