2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor Must be gone by wednesday or it goes to the rubbish tip.
I'm in if they are still available. where can I collect I have sent you my phone number off list On Sat, 2003-10-04 at 16:10, Andrew Thrift @ Home wrote:
2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor
Must be gone by wednesday or it goes to the rubbish tip.
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
On 6 Oct 2003, Gavin Denby wrote: If you're still interested in that Sun box, I've got bored with it already. It's just the basic workstation, no drives, 4M RAM installed (one bank was bad, and I didn't have any spare chips.. If you have spare 1M simms there's room for 32M inside) Also I've got an apparently-working SPARCstation with some kind of solaris installed; Perry lost the monitor cable and I haven't been able to find another one. I've been told it should work fine with serial console. You might be able to set up BOOTP/TFTP on it to boot the other box. 44 Banbury Cres. Drop in any time, I hardly ever go out. 8551826 or 021-2595256 --- This email has been sent on 100% RECYCLED electrons!
Hi All, sorry, the SYnoptics units are gone, other stuff is remaining if anyone is interested. Sorry i was not replying, I have been very busy over the last two days, not to mention my machine was busy emerging the OS, xfree, gnome, evolution before I could actually use it. On Tue, 2003-10-07 at 00:36, Gavin Denby wrote:
I'm in if they are still available.
where can I collect
I have sent you my phone number off list
On Sat, 2003-10-04 at 16:10, Andrew Thrift @ Home wrote:
2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor
Must be gone by wednesday or it goes to the rubbish tip.
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
______________________________________________________________________ _______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
Still interested if you let me know where to collect it, or how to contact you. On Tuesday, October 7, 2003, at 07:44 PM, Andrew Thrift @ Home wrote:
Hi All,
sorry, the SYnoptics units are gone, other stuff is remaining if anyone is interested.
Sorry i was not replying, I have been very busy over the last two days, not to mention my machine was busy emerging the OS, xfree, gnome, evolution before I could actually use it.
On Tue, 2003-10-07 at 00:36, Gavin Denby wrote:
I'm in if they are still available.
where can I collect
I have sent you my phone number off list
On Sat, 2003-10-04 at 16:10, Andrew Thrift @ Home wrote:
2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor
Must be gone by wednesday or it goes to the rubbish tip.
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
______________________________________________________________________ _______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
Hi Gavin, 07-858-4490 Can collect it anytime friday evening or saturday morning just give us a ring first On Wed, 2003-10-08 at 10:46, Gavin Denby wrote:
Still interested if you let me know where to collect it, or how to contact you.
On Tuesday, October 7, 2003, at 07:44 PM, Andrew Thrift @ Home wrote:
Hi All,
sorry, the SYnoptics units are gone, other stuff is remaining if anyone is interested.
Sorry i was not replying, I have been very busy over the last two days, not to mention my machine was busy emerging the OS, xfree, gnome, evolution before I could actually use it.
On Tue, 2003-10-07 at 00:36, Gavin Denby wrote:
I'm in if they are still available.
where can I collect
I have sent you my phone number off list
On Sat, 2003-10-04 at 16:10, Andrew Thrift @ Home wrote:
2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor
Must be gone by wednesday or it goes to the rubbish tip.
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
______________________________________________________________________ _______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
Sorry i was not replying, I have been very busy over the last two days, not to mention my machine was busy emerging the OS, xfree, gnome, evolution before I could actually use it.
So you installed Gentoo Linux ? There is a 2-CD set of Gentoo, based on the GRP (Gentoo Reference Platform) which has pre-compiled binaries for a decent base system - including XFree, GNOME, Evolution, etc. Saves a *lot* of time, although the documentation is a wee bit lacking (you have to set your USE flags to something that isn't the default before it'll actually consider using the packages). Saved me a lot of time last time I installed Gentoo (about two weeks ago) - the base install was bootstrapped off the main CD, and then all the bigger packages were installed off the package CD. I then promptly changed to unstable and re-built everything anyway, but I had a working system to start from at least.
Ummm - Still no replies, Does anyone know andrews phone number or other contact to let him know I am chasing him, Off -list only of course. On Sat, 2003-10-04 at 16:10, Andrew Thrift @ Home wrote:
2x WORKING Synoptic 2803 16 port 10megabit hubs 2x WORKING ATX PSU's 1x WORKING EMACS Hot Swap ATX PSU Chassis (no psu's) 1x DEAD Leo Monitor
Must be gone by wednesday or it goes to the rubbish tip.
_______________________________________________ wlug mailing list wlug(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/wlug
participants (4)
-
Andrew Thrift ＠ Home -
Daniel Lawson -
Gavin Denby -
zcat