'"There's no shortage of videos showing Steam running on expensive ARM single-board computers with discrete GPUs," writes Slashdot reader VennStone. "So I thought it would be worthwhile to make a guide for doing it on (relatively) inexpensive RK3588-powered single-board computers, using Box86/64 and Armbian." The guides I came across were out of date, had a bunch of extra steps thrown in, or were outright incorrect... Up first, we need to add the Box86 and Box64 ARM repositories [along with dependencies, ARMHF architecture, and the Mesa graphics driver]... The guide closes with a multi-line script and advice to "Just close your eyes and run this. It's not pretty, but it will download the Steam Debian package, extract the needed bits, and set up a launch script." (And then the final step is sudo reboot now.) "At this point, all you have to do is open a terminal, type 'steam', and tap Enter. You'll have about five minutes to wait... Check out the video to see how some of the tested games perform." At 720p, performance is all over the place, but the games I tested typically managed to stay above 30 FPS. This is better than I was expecting from a four-year-old SOC emulating x86 titles under ARM. Is this a practical way to play your Steam games? Nope, not even a little bit. For now, this is merely an exercise in ludicrous neatness. Things might get a wee bit better, considering Collabora is working on upstream support for RK3588 and Valve is up to something ARM-related, but ya know, "Valve Time"... "You might be tempted to enable Steam Play for your Windows games, but don't waste your time. I mean, you can try, but it ain't gonna work."' -- source: https://games.slashdot.org/story/25/03/23/1922228 Cheers, Peter