- wlug - list.wlug.org.nz

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 23 Nov '08

23 Nov '08

There's a WLUG meeting tonight: ---------------------------------------------------------------------- 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Dual-Seat Kids Computer PaulQuilty will present on configuring a linux box to enable dual workstations to run off a single box - allowing 2 monitors, 2 keyboards, 2 mice, each running a fully independant session. Effectively 2 computers running on one box.

1 0

cups driver for dcp-115c
by Glenn Stuart Morrissey 23 Nov '08

23 Nov '08

hi all Im trying to get my Brother DCP-115C multifunction printer to work under Linux ubuntu 8.04. Upon trying to get my DCP-115c to work, I have consulted the brother website: http://solutions.brother.com/linux/sol/printer/linux/cups_drivers.html#2 It reccommends that users of the DCP-115c use the MFC-210C package, however, I cannot get the brother MFC-210C package to install' because when I do it comes up with the 'wrong architecture - i386' error message. Upon further reading of the page I read the following for AMD 64bit users: "For AMD64 bit users: Our CUPS drivers and CUPS wrapper drivers have been developed and optimised for 32 bit Linux distributions, a list of which can be found here: http://solutions.brother.com/linux/sol/printer/linux/linux_config_list2.html However, if you are using an AMD64 bit distribution, we recommend you try copying the file named "brlpdwrapper" from /usr/lib/cups/filter to /usr/lib64/cups/filter." I have checked my /usr/lib/cups/filter directory and discovered that there was no file named "brlpdwrapper'. No surprises there, since the MFC-210C package would not install. Any suggestions? Glenn.

2 4

benq scanner install
by Glenn Stuart Morrissey 21 Nov '08

21 Nov '08

hi all I am installing my Benq scanner, and I have run into some trouble. I have listed my installation steps and terminal output: System: Ubuntu 5.10 Kernel:2.6.12-9 386 Scanner: BENQ 4300U Flatbed scanner USB 1.0 Powerpack 16v(a)1.0A 1. Before plugging scanner in: tail /var/log/messages glenn(a)glenn:~$ tail /var/log/messages Nov 21 21:14:08 localhost kernel: [4311704.892000] usb 1-1.2: USB disconnect, address 3 Nov 21 21:14:10 localhost kernel: [4311707.716000] usb 1-1.2: new low speed USB device using uhci_hcd and address 16 Nov 21 21:14:11 localhost kernel: [4311707.901000] input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:07.2-1.2 Nov 21 21:14:11 localhost input.agent[12936]: tsdev: already loaded Nov 21 21:14:11 localhost input.agent[12936]: mousedev: already loaded Nov 21 21:14:11 localhost input.agent[12936]: evdev: already loaded Nov 21 21:14:11 localhost usb.agent[12951]: usbhid: already loaded Nov 21 21:14:12 localhost input.agent[13046]: evdev: already loaded Nov 21 21:14:12 localhost input.agent[13052]: evdev: already loaded Nov 21 21:14:12 localhost input.agent[13113]: evdev: already loaded glenn(a)glenn:~$ 2. When scanner is recognised upon plugging in: glenn(a)glenn:~$ tail /var/log/messages Nov 21 21:14:11 localhost kernel: [4311707.901000] input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:07.2-1.2 Nov 21 21:14:11 localhost input.agent[12936]: tsdev: already loaded Nov 21 21:14:11 localhost input.agent[12936]: mousedev: already loaded Nov 21 21:14:11 localhost input.agent[12936]: evdev: already loaded Nov 21 21:14:11 localhost usb.agent[12951]: usbhid: already loaded Nov 21 21:14:12 localhost input.agent[13046]: evdev: already loaded Nov 21 21:14:12 localhost input.agent[13052]: evdev: already loaded Nov 21 21:14:12 localhost input.agent[13113]: evdev: already loaded Nov 21 21:17:31 localhost kernel: [4311908.671000] usb 1-1.4.1: new full speed USB device using uhci_hcd and address 17 Nov 21 21:17:32 localhost usb.agent[13207]: libusbscanner: loaded successfully glenn(a)glenn:~$ 3. lsusb glenn(a)glenn:~$ lsusb Bus 001 Device 017: ID 04a5:20b0 Acer Peripherals Inc. (now BenQ Corp.) S2W 3300U/4300U Bus 001 Device 016: ID 046d:c019 Logitech, Inc. Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 0000:0000 glenn(a)glenn:~$ 4. Checked /proc/bus/usb/devices to see if the scanner was recognised and had loaded a driver (driver=(none) in my case. glenn(a)glenn:~$cat /proc/bus/usb/devices T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 17 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04a5 ProdID=20b0 Rev= 1.20 S: Manufacturer=Color S: Product= FlatbedScanner 22 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms glenn(a)glenn:/proc/bus/usb$ 5. As a normal user, run xsane from the terminal: glenn(a)glenn:/proc/bus/usb$ xsane ERROR MESSAGE: Failed to open device 'snapscan:libusb:001:017': Invalid argument. 6. Run scanscan from the terminal: glenn(a)glenn:/proc/bus/usb$ snapscan bash: snapscan: command not found This is where I get into trouble as I cannot run apt-get on my 5.10 machine and can't figure out what to do next. Glenn.

1 0

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 20 Nov '08

20 Nov '08

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Dual-Seat Kids Computer PaulQuilty will present on configuring a linux box to enable dual workstations to run off a single box - allowing 2 monitors, 2 keyboards, 2 mice, each running a fully independant session. Effectively 2 computers running on one box.

1 0

installing brother DPC-115C
by Glenn Stuart Morrissey 20 Nov '08

20 Nov '08

Hi all I am attempting to install a brother dpc- 115 multifunction printer to my newly ubuntu'd laptop. I have downloaded the debian package from brother: http://solutions.brother.com/linux/sol/printer/linux/lpr_drivers.html but when I attempted to install the package, I received the following error: glenn(a)glenn-asus:/brother$ sudo dpkg -i --force-all --force-architecture mfc210clpr-1.0.2-1.i386.deb Password: (Reading database ... 88020 files and directories currently installed.) Preparing to replace mfc210clpr 1.0.2-1 (using mfc210clpr-1.0.2-1.i386.deb) ... Unpacking replacement mfc210clpr ... Setting up mfc210clpr (1.0.2-1) ... ln: creating symbolic link `/usr/lib/libbrcompij2.so.1.0' to `/usr/lib/libbrcompij2.so.1.0.2': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so.1' to `/usr/lib/libbrcompij2.so.1.0.2': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so' to `/usr/lib/libbrcompij2.so.1.0.2': File exists glenn(a)glenn-asus:/brother$ Do I need to install cups first? And am I downloading the correct driver? According to the brother website, the correct package was the one I downloaded, but I might be wrong about that. Any help appreciated. Glenn.

4 4

CPS
by Glenn Stuart Morrissey 20 Nov '08

20 Nov '08

Hi Bruce Should explain that I am running Ubuntu 7.04 on my Asus Laptop. Ok, when I go to the add printer setting in the administration menu, When I click on add new printer, it reads the CUPS database and shows that the two printers that I have connected to the Asus via. USB are detected. One being the Brother DCP-115c and the other is my little Xerox Phaser 3115. When I select the Brother printer and click on Forward, it shows in the manufacturers box at the top Brother..which is good. Underneath is the model of printer..cannot see DCP 115c in the menu. According to the Brother website, I should be using the MFC-210 Debian driver (Is this correct..?). Which also isn't listed. Ok, if I need to install CSH, where can I find this package and how do I install it (bearing in mind that I am going to have to transfer any drivers to the machine via. USB stick since I dont't as yet have the network operational on the Asus. Please excuse my ignorance as I have NO experience with CUPS or printing documents in a linux OS environment. T Thanks so much for your help thus far. Glenn.

2 3

RDram
by jaytee＠clear.net.nz 17 Nov '08

17 Nov '08

Hi All, I am looking for some rdram for a slow computer. Two 128's would help a lot if they were available. Regards John

1 0

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 16 Nov '08

16 Nov '08

There's a WLUG meeting tonight: ---------------------------------------------------------------------- 31 Aberfoyle Street # Previous Minutes # Treasurers report # Correspondence # Matters # Server status # General business

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 16 Nov '08

16 Nov '08

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Topic to be announced.

1 0

Fwd: Authenticate Linux Clients with Active Directory (Technet)
by Ian McDonald 14 Nov '08

14 Nov '08

This looks like a good article - haven't worked through all the details but looks useful. ---------- Forwarded message ---------- From: imcdnzl <ian.mcdonald(a)jandi.co.nz> Date: Sat, Nov 15, 2008 at 11:13 AM Subject: Authenticate Linux Clients with Active Directory (Technet) To: ian.mcdonald(a)jandi.co.nz, ian.mcdonald(a)datacom.co.nz Sent to you by imcdnzl via Google Reader: Authenticate Linux Clients with Active Directory (Technet)<http://lwn.net/Articles/307261/rss> via LWN.net <http://lwn.net> by ris on 11/14/08 Microsoft's Technet Magazine has a lengthy article<http://technet.microsoft.com/en-au/magazine/dd228986.aspx>on authenticating Linux clients with Active Directory. "Originally, Linux (and the GNU tools and libraries that run on it) was not built with a single authentication mechanism in mind. As a result of this, Linux application developers generally took to creating their own authentication scheme. They managed to accomplish this by either looking up names and password hashes in /etc/passwd (the traditional text file containing Linux user credentials) or providing an entirely different (and separate) mechanism." Things you can do from here: - Subscribe to LWN.net<http://www.google.com/reader/view/feed%2Fhttp%3A%2F%2Flwn.net%2Fheadlines%2…>using *Google Reader* - Get started using Google Reader<http://www.google.com/reader/?source=email>to easily keep up with *all your favorite sites* -- Web: http://wand.net.nz/~iam4/, http://www.jandi.co.nz Blog: http://iansblog.jandi.co.nz

1 0