- wlug - list.wlug.org.nz

Problem with .rpm files
by Leslie Katz 30 Apr '06

30 Apr '06

Thanks to both Shane and Michael for their replies. Shane, like you, I doubted that rpm would be found in DSL. However, to my surprise, the question in DSL, "whereis rpm", led to the answer, "/usr/bin/rpm". It seems then that it wasn't any absence of rpm which caused the DSL version of alien not to work for me as I'd hoped. Michael, my "real" distribution, if I can put it that way, is Fedora Core 3. Alien's not included in it. I did a search and ultimately found alien-8.21-1.noarch.rpm. When I tested an installation of it, I got on the usual dependency roundabout. The last message I got when I tested an installation of alien plus four additional perl-type rpms was "perl <1:5.8.0 conflicts with perl-base-5.8.8.4.i386". Since the latter file was one of those rpms whose installation I was testing, I took that to be a complaint that the version of perl I already had installed was less than 1:5.8.0. When I checked which version of perl I had installed, I was told it was perl-5.8.5-24.FC3.i386.rpm. At that stage, I threw up my hands, it being all beyond me. As to your kind offer to convert the two rpms for me, one of them is only 93.78 Kbytes in size, but the other is 3.61 Mbytes, a size too large to be passed back and forth by email. In spite of all the above, I don't want to give up trying to get the files converted and installed. It seems a shame if the printer will run in many other distributions, but not in DSL. So if you have (or anyone else has) any further ideas, I'd be very happy to try to apply them. Thanks again, Leslie

2 1

Problem with .rpm files
by Leslie Katz 28 Apr '06

28 Apr '06

For the son of friends who live a long way away, I converted an old laptop to run under Damn Small Linux, so that the son would no longer have to use the family computer. The friends have a Lexmark X1150 PrintTrio and they've asked whether I could get that gadget working with the old laptop, at least as a printer. I've found that many people have been able to get that gadget running as a printer under various distributions, including Debian and Ubuntu. In the case of the latter two distributions, people have downloaded a compressed file from Lexmark said by it to be intended for RedHat Linux 9.0, extracted from it two .rpm files, converted those two .rpm files into .deb files using alien and then installed the two .deb files. After that, they've been able to print with CUPS. Using a second old laptop which I also set up to run under DSL, I've been trying to duplicate the process just mentioned, with a view to giving instructions to my friends to follow on the laptop which they have. I've got as far as extracting the two .rpm files, but am stuck at the conversion to .deb stage. DSL has a version of alien available, but I haven't been successful at using it to convert the two .rpm files into .deb files. The persons who've given instructions about this exercise on the Web seem not to have been troubled very much about which version of their own distribution they were using, but simply reported success in installing the .deb files they'd created. If I could get the two .rpm files converted into .deb files via alien by someone running Debian or Ubuntu, is there any prospect that I could then take those files and install them successfully on my DSL computer? Or is it necessary that the conversion take place on the computer on which the files are intended to be installed? If the latter (which is my own guess), does anyone have any suggestion as to how I could proceed otherwise? For instance, would it be possible to convert the .rpm files to source files and then install the source files on the DSL computer? I'd welcome any advice. Thanks, Leslie

3 2

Canon i250
by John Torrance 27 Apr '06

27 Apr '06

Thank you to everyone who has sent me helpful stuff re trying to set up my printer. No joy yet but perhaps a knowledge deficit that I will have to correct Cheers John

1 0

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 26 Apr '06

26 Apr '06

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- Our guest for April is <''insert name here''>. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato. Meeting will start at 7:30pm.

3 2

Kubuntu installation CD/iso
by Justin Hyde 25 Apr '06

25 Apr '06

Can I borrow someone's Kubuntu CD/iso? I can pick up from wherever in Hamilton. Please reply off list. Cheers Justin Hyde ajh28(a)waikato.ac.nz

2 1

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 23 Apr '06

23 Apr '06

There's a WLUG meeting tonight: ---------------------------------------------------------------------- Our guest for April is DanielLawson, now with NSP (http://www.nsp.co.nz/) talking about and demonstrating Xen] http://www.wlug.org.nz/virtualisation ([Virtualisation). Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato. Meeting will start at 7:30pm.

1 0

Canon 250i printer
by Leslie Katz 21 Apr '06

21 Apr '06

You may have already swept by this, but just in case: 1. http://linuxprinting.org was very helpful to me when I got my printer going; and 2. there's an O'Reilly book by Carla Schroder called "Linux Cookbook". There was up on the Web, when I was setting up my printer, a sample chapter. It was about printing and, again, it was very helpful to me.

2 1

Canon 250i printer
by John Torrance 20 Apr '06

20 Apr '06

Please can anyone help me - I have a canon 250i printer. I believe that you can get it to run with Redhat and Fedora - there are a whole span of drivers on the Canon site - as a relatively unskilled Linux user, I just cannot get the printer working using Ubuntu (which I love by the way). Does anyone know how to get the damn thing to work with Ubuntu? Cheers John

3 2

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 18 Apr '06

18 Apr '06

Thanks.I am going to get the release as soon as it becomes available.. Can anyone tell me is it possible to run a "cleanup" programme after a failed exercise. All those error messages concern me a bit. John.. ----- Original Message Follows ----- > > Given the current difficulties with wifi, I have decided > > to shelf this project until a later time. It is not my > > preffered option but I am able to use windows in the > > meantime. > > Thanks John > > I suspect if you get Dapper Drake, it will all 'just work' > , including WPA. A beta is out in a couple of days. > > Craig >

1 0

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 18 Apr '06

18 Apr '06

Given the current difficulties with wifi, I have decided to shelf this project until a later time. It is not my preffered option but I am able to use windows in the meantime. Thanks John > OK. Maybe it's time to try an alternative approach! > Support for these cards will be in Linux 2.6.17 in a much > better format. Until now wireless in Linux has been a real > mess. There seems to be an effort to really tidy it up now > though. > > What you can do is download the latest test version from > http://kernel.org. It will be 2.6.17-rcx-gity where x and > y are some number

2 1

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 18 Apr '06

18 Apr '06

An after thought, before I do any more I thought maybe I should post the outcome of lspci and dmesg Here goes: Dmesg john(a)itchy:~$ dmesg data, 136k init) [ 17.261034] Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152) [ 17.284078] Security Framework v1.0.0 initialized [ 17.284083] SELinux: Disabled at boot. [ 17.284095] Mount-cache hash table entries: 256 [ 17.284179] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.284183] CPU: L2 Cache: 1024K (64 bytes/line) [ 17.284188] CPU: AMD Turion(tm) 64 Mobile Technology ML-30 stepping 02 [ 17.284297] checking if image is initramfs... it is [ 17.700435] ACPI: Looking for DSDT in initrd... not found! [ 17.796177] not found! [ 17.813320] Using local APIC timer interrupts. [ 17.875823] Detected 12.500 MHz APIC timer. [ 17.875834] testing NMI watchdog ... OK. [ 17.885964] NET: Registered protocol family 16 [ 17.885991] ACPI: bus type pci registered [ 17.885998] PCI: Using configuration type 1 [ 17.886001] mtrr: v2.0 (20020519) [ 17.886313] ACPI: Subsystem revision 20050729 [ 17.888052] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 17.888061] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 17.888729] ACPI: Interpreter enabled [ 17.888732] ACPI: Using IOAPIC for interrupt routing [ 17.888994] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.888997] PCI: Probing PCI hardware (bus 00) [ 17.889039] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 17.890576] Uncovering SIS963 that hid as a SIS503 (compatible=0) [ 17.890609] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 [ 17.890966] Boot video device is 0000:01:00.0 [ 17.897612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.898572] burst-mode-ec-10-Aug [ 17.898575] ACPI: Embedded Controller [EC0] (gpe 25) [ 17.916095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11) [ 17.916292] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11) [ 17.916498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11) [ 17.916691] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11) [ 17.916904] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11) [ 17.917105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) [ 17.917314] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 17.917509] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11) [ 17.917819] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.917826] pnp: PnP ACPI init [ 17.918563] pnp: PnP ACPI: found 7 devices [ 17.918634] usbcore: registered new driver usbfs [ 17.918654] usbcore: registered new driver hub [ 17.918682] PCI: Using ACPI for IRQ routing [ 17.918686] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.918752] PCI-DMA: Disabling IOMMU. [ 17.918865] pnp: 00:03: ioport range 0x8000-0x807f could not be reserved [ 17.918869] pnp: 00:03: ioport range 0x8080-0x80ff has been reserved [ 17.918873] pnp: 00:03: ioport range 0x8100-0x811f has been reserved [ 17.918877] pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 17.919095] Simple Boot Flag at 0x38 set to 0x1 [ 17.919179] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 17.919371] audit: initializing netlink socket (disabled) [ 17.919379] audit: initialized [ 17.919480] VFS: Disk quotas dquot_6.5.1 [ 17.919498] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.919530] devfs: 2004-01-31 Richard Gooch (rgooch(a)atnf.csiro.au) [ 17.919535] devfs: boot_options: 0x0 [ 17.919561] Initializing Cryptographic API [ 17.936206] Linux agpgart interface v0.101 (c) Dave Jones [ 17.936274] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 17.941054] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.941268] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.941274] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 17.943021] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18 [ 17.943029] ACPI: PCI interrupt for device 0000:00:02.6 disabled [ 17.943042] io scheduler noop registered [ 17.943056] io scheduler anticipatory registered [ 17.943062] io scheduler deadline registered [ 17.943071] io scheduler cfq registered [ 17.943370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.943440] NET: Registered protocol family 2 [ 17.953039] IP: routing cache hash table of 4096 buckets, 32Kbytes [ 17.953248] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 17.953433] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 17.953641] TCP: Hash tables configured (established 16384 bind 16384) [ 17.953702] NET: Registered protocol family 8 [ 17.953705] NET: Registered protocol family 20 [ 17.953910] ACPI wakeup devices: [ 17.953912] PCI0 LAN MODM USB0 USB1 USB2 USB3 [ 17.953917] ACPI: (supports S0 S3 S4 S5) [ 17.954141] Freeing unused kernel memory: 136k freed [ 17.971457] vga16fb: initializing [ 17.971462] vga16fb: mapped to 0xffff8100000a0000 [ 18.049675] Console: switching to colour frame buffer device 80x30 [ 18.049681] fb0: VGA16 VGA frame buffer device [ 18.061077] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 19.105760] Capability LSM initialized [ 19.114428] NET: Registered protocol family 1 [ 19.123475] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.123488] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.123492] ACPI: bus type ide registered [ 19.131811] SIS5513: IDE controller at PCI slot 0000:00:02.5 [ 19.131827] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.131846] SIS5513: chipset revision 0 [ 19.131848] SIS5513: not 100% native mode: will probe irqs later [ 19.131859] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 19.131872] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio [ 19.131884] ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio [ 19.131895] Probing IDE interface ide0... [ 19.394924] hda: ST9402113A, ATA DISK drive [ 20.007078] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.007132] Probing IDE interface ide1... [ 20.678800] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 20.984628] ide1 at 0x170-0x177,0x376 on irq 15 [ 20.984707] Probing IDE interface ide2... [ 21.497557] Probing IDE interface ide3... [ 22.009496] Probing IDE interface ide4... [ 22.521436] Probing IDE interface ide5... [ 23.036642] hda: max request size: 1024KiB [ 23.037045] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 23.037170] hda: cache flushes supported [ 23.037226] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 > [ 23.086206] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 23.086214] Uniform CD-ROM driver Revision: 3.20 [ 23.340462] Attempting manual resume [ 23.340679] swsusp: Suspend partition has wrong signature? [ 23.372270] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 23.372309] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 23.372337] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller [ 23.575498] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 23.575509] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000 [ 23.626399] hub 1-0:1.0: USB hub found [ 23.626411] hub 1-0:1.0: 3 ports detected [ 23.627320] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 23.627330] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) [ 23.829876] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 23.829884] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000 [ 23.880354] hub 2-0:1.0: USB hub found [ 23.880364] hub 2-0:1.0: 3 ports detected [ 23.891522] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 23 [ 23.891539] ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0 Controller [ 23.891582] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 23.891593] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000 [ 23.891624] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 23.891632] ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 23.891710] hub 3-0:1.0: USB hub found [ 23.891718] hub 3-0:1.0: 6 ports detected [ 23.918501] sis900.c: v1.08.08 Jan. 22 2005 [ 23.918542] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.923419] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13. [ 23.929581] 0000:00:04.0: Using transceiver found at address 13 as default [ 23.930245] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:10:f1:c4. [ 26.263405] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 26.267322] ACPI: Thermal Zone [THRM] (53 C) [ 26.408621] Attempting manual resume [ 26.432267] swsusp: Suspend partition has wrong signature? [ 26.460318] kjournald starting. Commit interval 5 seconds [ 26.460331] EXT3-fs: mounted filesystem with ordered data mode. [ 28.026878] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 31.145850] Adding 1108444k swap on /dev/hda5. Priority:-1 extents:1 [ 31.387234] EXT3 FS on hda2, internal journal [ 38.879486] lp: driver loaded but no devices found [ 38.898286] mice: PS/2 mouse device common for all mice [ 38.932627] Real Time Clock Driver v1.12 [ 39.527225] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 [ 39.529223] input: SynPS/2 Synaptics TouchPad on isa0060/serio1 [ 40.131504] ts: Compaq touchscreen protocol output [ 41.788857] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel(a)redhat.com [ 43.211270] cdrom: open failed. [ 45.531310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.541929] shpchp: shpc_init : shpc_cap_offset == 0 [ 45.541940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.969722] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 46.527630] intel8x0_measure_ac97_clock: measured 49483 usecs [ 46.527634] intel8x0: clocking to 48000 [ 46.972627] Linux Kernel Card Services [ 46.972631] options: [pci] [cardbus] [pm] [ 46.984682] PCI: Enabling device 0000:00:06.0 (0000 -> 0002) [ 46.984691] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 46.984705] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083] [ 46.984734] Yenta: Using CSCINT to route CSC interrupts to PCI [ 46.984737] Yenta: Routing CardBus interrupts to PCI [ 46.984741] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64 [ 47.206247] Yenta: ISA IRQ mask 0x06f8, PCI irq 19 [ 47.206251] Socket status: 30000007 [ 48.864634] input: PC Speaker [ 49.649609] eth0: Media Link Off [ 49.658301] NET: Registered protocol family 17 [ 116.390981] ACPI: AC Adapter [ACAD] (on-line) [ 116.444498] ACPI: Battery Slot [BAT1] (battery present) [ 116.460156] ACPI: Power Button (FF) [PWRF] [ 116.460184] ACPI: Lid Switch [LID] [ 116.460192] ACPI: Power Button (CM) [PWRB] [ 116.460198] ACPI: Sleep Button (CM) [SLPB] [ 116.547487] ibm_acpi: ec object not found [ 118.041331] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 118.041341] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 118.041348] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 118.062068] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 118.062075] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 118.062081] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 129.054049] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) [ 129.054507] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x4 (1450 mV) [ 129.054513] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16 (1000 mV) [ 129.054724] cpu_init done, current fid 0x8, vid 0x4 [ 129.216366] Bluetooth: Core ver 2.7 [ 129.216376] NET: Registered protocol family 31 [ 129.216380] Bluetooth: HCI device and connection manager initialized [ 129.216393] Bluetooth: HCI socket layer initialized [ 129.228916] Bluetooth: L2CAP ver 2.7 [ 129.228921] Bluetooth: L2CAP socket layer initialized [ 129.250292] Bluetooth: RFCOMM ver 1.5 [ 129.250302] Bluetooth: RFCOMM socket layer initialized [ 129.250319] Bluetooth: RFCOMM TTY layer initialized [ 137.406154] NET: Registered protocol family 10 [ 137.406243] Disabled Privacy Extensions on device ffffffff8035a5a0(lo) [ 137.406390] IPv6 over IPv4 tunneling driver [ 139.401887] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 139.401898] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 139.401906] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 142.674177] eth0: no IPv6 routers present [ 154.400860] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 154.400870] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 154.400878] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 169.401744] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 169.401754] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 169.401763] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 184.402548] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 184.402558] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 184.402566] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 199.403450] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 199.403461] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 199.403469] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 214.404418] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 214.404428] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 214.404437] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 229.405300] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 229.405310] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 229.405318] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 244.405340] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 244.405350] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 244.405357] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 259.406938] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 259.406949] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 259.406957] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND john(a)itchy:~$ Then lspci john(a)itchy:~$ lspci 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03 ) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media I O] (rev 25) 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 91) 0000:00:06.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controlle r 0000:00:0b.0 Network controller: Broadcom Corporation: Unknown device 4318 (rev 02) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M 661FX/M661MX/741/M741/760/M760 PCI/AGP john(a)itchy:~$ Maybe I need to fix up this stuff first ?????? John.. ----- Original Message Follows ----- > I am now completely stuck. If I redo everything will it > cause a further problem for me??? > John > > > > ----- Original Message Follows ----- > > The Gui Does not work it goes into permanently enabling > > mode > > > > I down loaded acer_acpi-0.3 > > Then: make > > make install. > > > > john(a)itchy:~$ sudo modprobe acer_acpi > > Password: > > FATAL: Error inserting acer_acpi > > > > > (/lib/modules/2.6.12-9-amd64-generic/extra/acer_acpi.ko): > > No such device john(a)itchy:~$ > > > > > -- > > > Try configuring your network now under somewhere like > > > desktop, administration, networking. > > > > > > If you want to use WPA you will also need to install > > > wpa_supplicant. Otherwise hopefully it will work! > > > > > > There is another way (download 2.6.17 test version) to > > > do it if ndiswrapper doesn't work but try that first. > > > > > > Ian > > > -- > > > Ian McDonald > > > Web: http://wand.net.nz/~iam4 > > > Blog: http://imcdnzl.blogspot.com > > > WAND Network Research Group > > > Department of Computer Science > > > University of Waikato > > > New Zealand > > > > _______________________________________________ > > wlug mailing list | wlug(a)list.waikato.ac.nz > > Unsubscribe: > > http://list.waikato.ac.nz/mailman/listinfo/wlug > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

5 8

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 16 Apr '06

16 Apr '06

I am now completely stuck. If I redo everything will it cause a further problem for me??? John ----- Original Message Follows ----- > The Gui Does not work it goes into permanently enabling > mode > > I down loaded acer_acpi-0.3 > Then: make > make install. > > john(a)itchy:~$ sudo modprobe acer_acpi > Password: > FATAL: Error inserting acer_acpi > (/lib/modules/2.6.12-9-amd64-generic/extra/acer_acpi.ko): > No such device > john(a)itchy:~$ > > > -- > > Try configuring your network now under somewhere like > > desktop, administration, networking. > > > > If you want to use WPA you will also need to install > > wpa_supplicant. Otherwise hopefully it will work! > > > > There is another way (download 2.6.17 test version) to > > do it if ndiswrapper doesn't work but try that first. > > > > Ian > > -- > > Ian McDonald > > Web: http://wand.net.nz/~iam4 > > Blog: http://imcdnzl.blogspot.com > > WAND Network Research Group > > Department of Computer Science > > University of Waikato > > New Zealand > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 16 Apr '06

16 Apr '06

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- Our guest for April is <''insert name here''>. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato. Meeting will start at 7:30pm.

1 0

Warren Hughes (IBM) is out of the office.
by Warren Hughes 16 Apr '06

16 Apr '06

I will be out of the office starting 13/04/2006 and will not return until 26/04/2006. Hi, thanks for your email. In my absence for urgent queries please contact Wayne Goss on +64 21 375592. Otherwise I I will respond Wednesday April 26. Cheers, Warren.

1 0

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 16 Apr '06

16 Apr '06

The Gui Does not work it goes into permanently enabling mode I down loaded acer_acpi-0.3 Then: make make install. john(a)itchy:~$ sudo modprobe acer_acpi Password: FATAL: Error inserting acer_acpi (/lib/modules/2.6.12-9-amd64-generic/extra/acer_acpi.ko): No such device john(a)itchy:~$ > -- > Try configuring your network now under somewhere like > desktop, administration, networking. > > If you want to use WPA you will also need to install > wpa_supplicant. Otherwise hopefully it will work! > > There is another way (download 2.6.17 test version) to do > it if ndiswrapper doesn't work but try that first. > > Ian > -- > Ian McDonald > Web: http://wand.net.nz/~iam4 > Blog: http://imcdnzl.blogspot.com > WAND Network Research Group > Department of Computer Science > University of Waikato > New Zealand

1 0

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 16 Apr '06

16 Apr '06

I do not think those errors have anything to do with my current situation there are about 30 of those error messages and I only tailed 6 ---- Original Message Follows ----- > I ventured into the install and got to here: > > root(a)itchy:~# ndiswrapper -l > Installed ndis drivers: > bcmwl5 driver present, hardware present > root(a)itchy:~# modprobe ndiswrapper > root(a)itchy:~# dmesg | tail -n 6 > [ 2435.979518] ACPI-0362: *** Error: Looking up [Z007] > in namespace, AE_NOT_FOUND > [ 2435.979528] search_node ffff81001b2fce00 start_node > ffff81001b2fce00 return_node 0000000000000000 > [ 2435.979536] ACPI-0508: *** Error: Method execution > failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), > AE_NOT_FOUND > [ 2450.979890] ACPI-0362: *** Error: Looking up [Z007] > in namespace, AE_NOT_FOUND > [ 2450.979900] search_node ffff81001b2fce00 start_node > ffff81001b2fce00 return_node 0000000000000000 > [ 2450.979908] ACPI-0508: *** Error: Method execution > failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), > AE_NOT_FOUND > root(a)itchy:~# > Not real sure what I need to do as the drivers seem to be > there and the device also :-? > > > > > ----- Original Message Follows ----- > > Sorry about the tardy response I got dragged away. > > The Wireless device is a broadcom b-g > > The howto is here: > > > https://wiki.ubuntu.com/WifiDocs/Acer5021WLMi_Amd64?action=show&redirect=Wi… > > > > I searched synaptic and found all the gcc/cpp already to > > install. although it does not state amd 64 the install > > media was an amd 64 installer. > > I will go ahead and try to install the packages I have > > found > > > > > > > > ----- Original Message Follows ----- > > > On 4/10/06, jaytee(a)clear.net.nz <jaytee(a)clear.net.nz> > > > wrote: > > > > > Hi All > > > > I am trying to follow a howto but have so far > > > > not been able to find > > > > > > > > > > > > gcc-4.4-base_3.4.4-6ubuntu8_amd64.deb > > > > I googled it and returned a negative result. maybe > > > > it is a typo??? > > > > > > > What wireless card are you trying to run? > > > > > > Where is your howto? > > > > > > I would say that you are better off using apt or > > > aptitude rather than an exact version of package but > > > not sure without seeing your how to. > > > > > > Ian > > > > > > -- > > > Ian McDonald > > > Web: http://wand.net.nz/~iam4 > > > Blog: http://imcdnzl.blogspot.com > > > WAND Network Research Group > > > Department of Computer Science > > > University of Waikato > > > New Zealand > > > > _______________________________________________ > > wlug mailing list | wlug(a)list.waikato.ac.nz > > Unsubscribe: > > http://list.waikato.ac.nz/mailman/listinfo/wlug > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

2 1

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 16 Apr '06

16 Apr '06

I ventured into the install and got to here: root(a)itchy:~# ndiswrapper -l Installed ndis drivers: bcmwl5 driver present, hardware present root(a)itchy:~# modprobe ndiswrapper root(a)itchy:~# dmesg | tail -n 6 [ 2435.979518] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 2435.979528] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 2435.979536] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND [ 2450.979890] ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND [ 2450.979900] search_node ffff81001b2fce00 start_node ffff81001b2fce00 return_node 0000000000000000 [ 2450.979908] ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff81001b2fcc00), AE_NOT_FOUND root(a)itchy:~# Not real sure what I need to do as the drivers seem to be there and the device also :-? ----- Original Message Follows ----- > Sorry about the tardy response I got dragged away. > The Wireless device is a broadcom b-g > The howto is here: > https://wiki.ubuntu.com/WifiDocs/Acer5021WLMi_Amd64?action=show&redirect=Wi… > > I searched synaptic and found all the gcc/cpp already to > install. although it does not state amd 64 the install > media was an amd 64 installer. > I will go ahead and try to install the packages I have > found > > > > ----- Original Message Follows ----- > > On 4/10/06, jaytee(a)clear.net.nz <jaytee(a)clear.net.nz> > > wrote: > > > > Hi All > > > I am trying to follow a howto but have so far > > > not been able to find > > > > > > > > > gcc-4.4-base_3.4.4-6ubuntu8_amd64.deb > > > I googled it and returned a negative result. maybe it > > > is a typo??? > > > > > What wireless card are you trying to run? > > > > Where is your howto? > > > > I would say that you are better off using apt or > > aptitude rather than an exact version of package but not > > sure without seeing your how to. > > > > Ian > > > > -- > > Ian McDonald > > Web: http://wand.net.nz/~iam4 > > Blog: http://imcdnzl.blogspot.com > > WAND Network Research Group > > Department of Computer Science > > University of Waikato > > New Zealand > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

1 0

Re: [wlug] Amd 64 wifi
by jaytee＠clear.net.nz 15 Apr '06

15 Apr '06

Sorry about the tardy response I got dragged away. The Wireless device is a broadcom b-g The howto is here: https://wiki.ubuntu.com/WifiDocs/Acer5021WLMi_Amd64?action=show&redirect=Wi… I searched synaptic and found all the gcc/cpp already to install. although it does not state amd 64 the install media was an amd 64 installer. I will go ahead and try to install the packages I have found ----- Original Message Follows ----- > On 4/10/06, jaytee(a)clear.net.nz <jaytee(a)clear.net.nz> > wrote: > > > Hi All > > I am trying to follow a howto but have so far not > > been able to find > > > > > > gcc-4.4-base_3.4.4-6ubuntu8_amd64.deb > > I googled it and returned a negative result. maybe it is > > a typo??? > > > What wireless card are you trying to run? > > Where is your howto? > > I would say that you are better off using apt or aptitude > rather than an exact version of package but not sure > without seeing your how to. > > Ian > > -- > Ian McDonald > Web: http://wand.net.nz/~iam4 > Blog: http://imcdnzl.blogspot.com > WAND Network Research Group > Department of Computer Science > University of Waikato > New Zealand

1 0

Upcoming WLUG committee meeting (1 week today)
by Meeting Reminder bot 12 Apr '06

12 Apr '06

As per the WLUG charter, please note that there is a WLUG executive committee meeting one week from today. If you wish to get an item on the agenda for this meeting, please email it to secretary(a)wlug.org.nz. ---------------------------------------------------------------------- WLUG Committee Meeting To have something added to the agenda for this meeting, please email secretary @ wlug.org.nz. Location: 35 Galway Avenue Provisional agenda: # Minutes from previous meeting # Matters arising # Correspondence # Treasurers report # General business ----- CommitteeMeetingTopics

1 0

New Zealand Linux mirrors list
by Craig Box 12 Apr '06

12 Apr '06

Hi everyone, I've just updated the wiki's list of Linux and BSD mirrors in New Zealand: http://www.wlug.org.nz/NewZealandLinuxMirrors Also, a NZ-focused sources.list file for Debian: http://www.wlug.org.nz/AptSourcesList Please check them out, and update them if you can. Regards Craig

1 0

Ubuntu guide
by Ian McDonald 12 Apr '06

12 Apr '06

Here is something that looks quite good upon first read: http://www.pcmech.com/show/os/917/1/ -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

Amd 64 wifi
by jaytee＠clear.net.nz 10 Apr '06

10 Apr '06

Hi All I am trying to follow a howto but have so far not been able to find gcc-4.4-base_3.4.4-6ubuntu8_amd64.deb I googled it and returned a negative result. maybe it is a typo??? Download these packages from Ubuntu : * gcc-3.4-base_3.4.4-6ubuntu8_amd64.deb * gcc-4.4-base_3.4.4-6ubuntu8_amd64.deb * cpp-3.4_3.4.4-6ubuntu8_amd64.deb * gcc-3.4_3.4.4-6ubuntu8_amd64.deb o You can find these files searching a little bit in : [WWW] http://packages.ubuntu.com/breezy/devel/ Any help would be appreciated Regards John

3 2

NOHO LAN
by emailivan＠slingshot.co.nz 07 Apr '06

07 Apr '06

Hello all, Are there any network pro's out there that would be willing to bounce some ideas around with me (off list) for a planned SOHO LAN at work. Requirements: 1 x MS Application 'Server' 6 x MS Workstations (existing) Plus: Firewall, Email Server, File Server It's quite a small LAN (in terms of users), but we have some special requirements. (Which I don't want to go into here) Many thanks, Ivan

1 0

Microsoft to put it's Linux labs on web
by Ian McDonald 05 Apr '06

05 Apr '06

http://news.com.com/2100-7252_3-6058196.html?part=rss&tag=6058196&subj=news -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

Acceptable use of the WLUG Mailing List
by Meeting Reminder bot 31 Mar '06

31 Mar '06

The WLUG Mailing List is the discussion-list extension of the Waikato Linux Users Group (Incorporated). As such, we expect members of this list to adhere to the principles espoused in the official WLUG Charter[1], in particular, Rule 6, which covers the activities on this mailing list. While this is an Acceptable Use Policy, the WLUG Committee do recognise the need for informal discussion among list members, and draconian administration is not the goal here. Please keep in mind, however, that your comments to this list do represent the WLUG, and while it is good to be seen as an organisation with a sense of humour, some comments may do major harm to our credibility as a serious advocate of GNU/Linux and all things Free Software/ Open Source related. List discussion should * be honest * accentuate the positive, without hyperbole or blatant misrepresentation * maintain a reasonable level of spelling and grammar * not indulge in ad hominem attacks * not continue inflammatory or abusive threads * not be unprofessional or petty, especially with respect to the names of other software companies * not promote or denigrate political, cultural, or religious views * not indulge in marketing or advertising, other than on a private sale basis, or advertising of jobs - which may be announced once only * not reproduce copyrighted material without permission from the copyright holder * not defame any person or organisation Posters who consistently violate these guidelines will be dealt with at the discretion of the List Maintainer. If you feel you have been unfairly dealt with, you have recourse to any member of the WLUG Committee[2]. Certain mailing list etiquette should also be maintained: * please use only plain text (not HTML) * reply inline or below when quoting, rather than on top * trim quotes (don't reply quoting a 10 page message with a single line of reply) If you have any questions, start reading at http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html. These points have been established over a long time on this list. If you want to question them, please do it off list. As list users, use your discretion when pulling people up over etiquette - please reply off list, and if there is a serious breach, the list administrator will probably have dealt with it off-list already. [1] http://www.wlug.org.nz/WlugCharter [2] http://www.wlug.org.nz/WlugCommittee

1 0

Free Remote Access to LinuxPPC64 Servers for Open Source Developers
by Craig Box 28 Mar '06

28 Mar '06

Forwarded from Robert MacFarlan [Robert_MacFarlan(a)us.ibm.com] Hello, I am mailing a few of the more active Linux User Groups in Australia to make them aware of community-based remote access systems that have become available. These systems are open to any Open Source Linux developer interested in developing / porting / or just tinkering w/ Linux on high-performance 64-bit IBM POWER5 or PPC970 systems. In the case of Australian National University's system - brought on-line last week - they are hosting a 4-way system w/ 16GB of RAM. This system can be a great place to test SMP and memory scalability. If any of your members are interested in working on these systems they are more than welcome to request an account. Additional systems will be added in the coming months. Australia National University: (http://clug.anu.edu.au/) Other systems being hosted world-wide include: Oregon State University Open Source Lab - PPC970 running Gentoo ( http://wiki.osuosl.org/display/PPC64/Home) SourceForge.net compile farm - POWER5 running SLES ( http://sourceforge.net/docs/compile_farm#cf_overview) University of Portland Linux on Power Portal - POWER5 running SLES ( http://egr.up.edu:8080/) University of Augsburg Debian on PowerPC - POWER5 running Debian ( http://tuxppc.rz.uni-augsburg.de/) Linux on Power @ Peking University - POWER5 running SLES ( http://ppclinux.pku.edu.cn/) Thank you for your time, and if you have any questions, please feel free to let me know. Cheers, Robert MacFarlan Strategist ISV Global Solutions Enablement IBM

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 28 Mar '06

28 Mar '06

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- Our guest for March is Linda Wright. Her talk is entitled ''New Business Models for Open Source (http://www.wlug.org.nz/OpenSource) Advocates and Developers'': ;: "In a nutshell, I plan to survey some of the past Commercial and http://www.wlug.org.nz/OSS business models (from the anarchic and utopian to the present) and discuss some of the commercial implications of these. I then intend to discuss three contemporary OSS business models, their virtues and limitations, and the new trend of large so-called 'old economy' companies solving the problem of OSS competition by buying out start-ups. Then I will move on to talk about the business model of Concentus, which I believe is fairly unique, and how I believe it addresses some of the classical problems that both commercial and OSS developers face with their respective models. Anyone who has ever wondered how the heck you can make money out of supposedly free software should probably attend." Linda Wright is the former Software Development Manager for Toll New Zealand (http://www.tollnz.co.nz) (Corporate). Linda is a native of San Francisco, California and has over 20 years experience in Software Development (http://www.wlug.org.nz/SoftwareEngineering) SDLC Management] and Business Consulting. Some of her personal career highlights include developing one of the world's first Visual Software Development Environments (1989), the creation of a complex problem solving methodology called 'The Resolution of Complexity' (1992), and a http://www.wlug.org.nz/patent for a Telephonic Transaction System (1998) (http://www.wipo.int/ipdl/IPDL-CIMAGES/view/pct/getbykey5?KEY=00/18088.000330) Linda is the managing director of a film production company called Pretty Good Productions Ltd, and has recently formed Concentus Ltd, an [Auckland-based technology company. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato (http://www.wlug.org.nz/UniversityOfWaikato) Meeting will start at 7:30pm. Refreshments will be available afterwards.

3 3

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 26 Mar '06

26 Mar '06

There's a WLUG meeting tonight: ---------------------------------------------------------------------- Our guest for March is Linda Wright. Her talk is entitled ''New Business Models for Open Source (http://www.wlug.org.nz/OpenSource) Advocates and Developers'': ;: "In a nutshell, I plan to survey some of the past Commercial and http://www.wlug.org.nz/OSS business models (from the anarchic and utopian to the present) and discuss some of the commercial implications of these. I then intend to discuss three contemporary OSS business models, their virtues and limitations, and the new trend of large so-called 'old economy' companies solving the problem of OSS competition by buying out start-ups. Then I will move on to talk about the business model of Concentus, which I believe is fairly unique, and how I believe it addresses some of the classical problems that both commercial and OSS developers face with their respective models. Anyone who has ever wondered how the heck you can make money out of supposedly free software should probably attend." Linda Wright is the former Software Development Manager for Toll New Zealand (http://www.tollnz.co.nz) (Corporate). Linda is a native of San Francisco, California and has over 20 years experience in Software Development (http://www.wlug.org.nz/SoftwareEngineering) SDLC Management] and Business Consulting. Some of her personal career highlights include developing one of the world's first Visual Software Development Environments (1989), the creation of a complex problem solving methodology called 'The Resolution of Complexity' (1992), and a http://www.wlug.org.nz/patent for a Telephonic Transaction System (1998) (http://www.wipo.int/ipdl/IPDL-CIMAGES/view/pct/getbykey5?KEY=00/18088.000330) Linda is the managing director of a film production company called Pretty Good Productions Ltd, and has recently formed Concentus Ltd, an [Auckland-based technology company. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato (http://www.wlug.org.nz/UniversityOfWaikato) Meeting will start at 7:30pm. Refreshments will be available afterwards.

1 0

Squid - Proxy Auth - Firewall
by Jodi Thomson 24 Mar '06

24 Mar '06

Hi all I'm wanting to setup Squid to use proxy auth against Active Directory. That seems straightforward enough. However I am having trouble in figuring out whether or not to put Squid internally or inside the DMZ for this to work The firewall re will be running is a Juniper NetScreen-25. The DMZ is comprised of real-world IP's, internally it's all private IP Does any one have any experience in this? Cheers Jodi ___________________________________________________ Jodi Thomson, Mr (BA, A+, MCP) IT Support Engineer - Turbo Investments Group Ltd Phone: +64 6 834-0537 ext 1008 cell: +64 21 799 961 jodi.thomson(a)turbogroup.co.nz "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." DISCLAIMER: This electronic message together with any attachments is confidential. If you are not the intended recipient, do not copy, disclose or use the contents in any way. Please also advise us by return e-mail that you have received the message and then please destroy. Turbo Investments Group Ltd is not responsible for any changes made to this message and / or any attachments after sending by Turbo Investments Group Ltd. We use virus scanning software but exclude all liability for viruses or anything similar in this email or any attachment.

2 1

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 23 Mar '06

23 Mar '06

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- Our guest for March is Linda Wright. Her talk is entitled ''New Business Models for Open Source (http://www.wlug.org.nz/OpenSource) Advocates and Developers'': ;: "In a nutshell, I plan to survey some of the past Commercial and http://www.wlug.org.nz/OSS business models (from the anarchic and utopian to the present) and discuss some of the commercial implications of these. I then intend to discuss three contemporary OSS business models, their virtues and limitations, and the new trend of large so-called 'old economy' companies solving the problem of OSS competition by buying out start-ups. Then I will move on to talk about the business model of Concentus, which I believe is fairly unique, and how I believe it addresses some of the classical problems that both commercial and OSS developers face with their respective models. Anyone who has ever wondered how the heck you can make money out of supposedly free software should probably attend." Linda Wright is the former Software Development Manager for Toll New Zealand (http://www.tollnz.co.nz) (Corporate). Linda is a native of San Francisco, California and has over 20 years experience in Software Development (http://www.wlug.org.nz/SoftwareEngineering) SDLC Management] and Business Consulting. Some of her personal career highlights include developing one of the world's first Visual Software Development Environments (1989), the creation of a complex problem solving methodology called 'The Resolution of Complexity' (1992), and a http://www.wlug.org.nz/patent for a Telephonic Transaction System (1998) (http://www.wipo.int/ipdl/IPDL-CIMAGES/view/pct/getbykey5?KEY=00/18088.000330) Linda is the managing director of a film production company called Pretty Good Productions Ltd, and has recently formed Concentus Ltd, an [Auckland-based technology company. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato (http://www.wlug.org.nz/UniversityOfWaikato) Meeting will start at 7:30pm. Refreshments will be available afterwards.

1 0

kernel for p4 (kinda OT)
by Glenn Enright 23 Mar '06

23 Mar '06

Anyone have some ideas why they never built an arch for p4 CPUs into the kernel? I realize that these are covered by i386. A little while ago, after looking round a bit in a custom tree and creating a p4 arch myself (Im not a programmer BTW, just hacking, pruned out some 'surplus' code mostly, using 2.6.14), a clean build ran in *lots* less time. No runtime benchmarks, but response times were also definately better, and had no issues with drivers or anything. Used gcc 3.4.5 too. It wasnt quite as stable so I did something wrong somewhere, but it seems odd there was no real demand for this arch. Especially since p4s have been around for so long. BTW I did have a look on google, but mostly found newbies asking the same question with no response or devs saying they couldnt be bothered lol. Just seems a shame to waste potential if its there :). Comments? -- No outsider has ever seen a Tleilaxu female and lived to tell about it. Considering the Tleilaxu penchant for genetic manipulation -- see, e.g., related memos on clones and gholas -- this simple observation raises a wealth of additional questions. -- Bene Gesserit Analysis

3 4

Re: [wlug] URL for page of Wiki articles to add
by David Hallett 23 Mar '06

23 Mar '06

At 14:07 23/03/2006, you wrote: >I can't remember what the URL for this is - the page which lists all >the articles that need to be created... > >Can anybody tell me what this is as I feel like writing Wiki pages at >the moment for some reason... http://www.wlug.org.nz/WantedWikis Is that what you're looking for? Regards, _____________________________ David Hallett, BSc, MNZCS Managing Director Pulsar Computer Solutions Ltd P.O. Box 15-516, Hamilton, New Zealand Mob: +64-21-802 256 Fax: +64-7-846 3677 www.pulsar.net.nz

2 1

URL for page of Wiki articles to add
by Ian McDonald 23 Mar '06

23 Mar '06

I can't remember what the URL for this is - the page which lists all the articles that need to be created... Can anybody tell me what this is as I feel like writing Wiki pages at the moment for some reason... -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

New Orcon plans announced
by Craig Box 21 Mar '06

21 Mar '06

Hi, Orcon sponsor the WLUG by hosting Hoiho, the server that runs the wiki and user accounts. We hope that our members support Orcon wherever possible, and as such would like to point out that Orcon have recently announced their new broadband plans, which can be seen at http://orcon.net.nz/products/bitstream/newplans. Regards, Craig

6 5

Modem required
by Craig Box 20 Mar '06

20 Mar '06

Hi, A WLUG member asked me about modems at last months meeting, and I told him I was sure someone would have a modem floating around that was surplus to requirements. Can anyone help him out with a Linux-friendly (ie external or full hardware) 56k modem? Please reply to me off-list. Regards Craig

4 3

Fedora Core 5 has been released
by Ian McDonald 20 Mar '06

20 Mar '06

For more see: http://www.osnews.com/story.php?news_id=14024 -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

2 2

Fwd: Linux kernel 2.6.16 released
by Ian McDonald 20 Mar '06

20 Mar '06

---------- Forwarded message ---------- From: Linux Kernel Distribution System <kdist(a)linux.kernel.org> Date: Mar 20, 2006 6:35 PM Subject: Linux kernel 2.6.16 released To: linux-kernel-announce(a)hera.kernel.org Linux kernel version 2.6.16 has been released. It is available from: Patch: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/patch-2.6.16.bz2 Full source: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2 Sizes in bytes Compressed Uncompressed ------------------------------------------------------------ Patch 5335897 29085385 Full source 40845005 233953280 ----------------------------------------------------------------------------- -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

RimuHosting Hiring
by Peter Bryant 20 Mar '06

20 Mar '06

Hi. I'm looking for someone(s) to do Linux support work for RimuHosting: setup people's Linux servers, install Linux apps, troubleshoot problems and the like. It can be very interesting, challenging work. For those that don't know, RimuHosting is based in Cambridge and we provide Linux VPS hosting services to a global customer base. If you are available part-time (Sundays and/or Mondays) to help, then check out: http://forums.rimuhosting.com/forums/showthread.php?p=645#post645 If you had any questions just reply off list to me. Cheers, Peter

1 0

Re: [wlug] more laptop consideration (a decision)
by jaytee＠clear.net.nz 19 Mar '06

19 Mar '06

Should read "no heat problem" ----- Original Message Follows ----- > Waiting until the day before you leave the country is not > a good way to make a buying decision but that is what > happened in my case > _I did_ go to dse and try an install but dopey me took the > wrong architecture so the thing failed. > My purchase was a Acer aspire 5000 amd64 1.6mhz turion > 448 mg of reported ram > Installed is Ubuntu and thanks to a lot of support from a > Wlug member I have a useful system. I need to hunt around > for some vga drivers and some other programmes. > So far I have run the machine for extended periods with > a heat problem. It remains to be seen how it will respond > to bounceing around in a truck for 100,000 miles or so > Thank you for all your advise and help. John > > > ----- Original Message Follows ----- > > Sorry to hear about the issues, I have several acers and > > we had a similar but easily fixed problem. > > > > The poor airflow is really bad dust protection, So what > > we do is use a household vacuum cleaner and the crevice > > tool (narrow slot thing) to vacuum all the cooling > > ports. Diagnostics usually show a 15 - 20 degree drop > > in the CPU temp after this. No need to open the Laptop, > > but it pays to not do while its running. > > > > Could be worth a try > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

1 0

Re: [wlug] more laptop consideration (a decision)
by jaytee＠clear.net.nz 19 Mar '06

19 Mar '06

<edit> should be no heat problem!!!!!!! ----- Original Message Follows ----- > Waiting until the day before you leave the country is not > a good way to make a buying decision but that is what > happened in my case > _I did_ go to dse and try an install but dopey me took the > wrong architecture so the thing failed. > My purchase was a Acer aspire 5000 amd64 1.6mhz turion > 448 mg of reported ram > Installed is Ubuntu and thanks to a lot of support from a > Wlug member I have a useful system. I need to hunt around > for some vga drivers and some other programmes. > So far I have run the machine for extended periods with > a heat problem. It remains to be seen how it will respond > to bounceing around in a truck for 100,000 miles or so > Thank you for all your advise and help. John > > > ----- Original Message Follows ----- > > Sorry to hear about the issues, I have several acers and > > we had a similar but easily fixed problem. > > > > The poor airflow is really bad dust protection, So what > > we do is use a household vacuum cleaner and the crevice > > tool (narrow slot thing) to vacuum all the cooling > > ports. Diagnostics usually show a 15 - 20 degree drop > > in the CPU temp after this. No need to open the Laptop, > > but it pays to not do while its running. > > > > Could be worth a try > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

1 0

Re: [wlug] more laptop consideration (a decision)
by jaytee＠clear.net.nz 19 Mar '06

19 Mar '06

Waiting until the day before you leave the country is not a good way to make a buying decision but that is what happened in my case _I did_ go to dse and try an install but dopey me took the wrong architecture so the thing failed. My purchase was a Acer aspire 5000 amd64 1.6mhz turion 448 mg of reported ram Installed is Ubuntu and thanks to a lot of support from a Wlug member I have a useful system. I need to hunt around for some vga drivers and some other programmes. So far I have run the machine for extended periods with a heat problem. It remains to be seen how it will respond to bounceing around in a truck for 100,000 miles or so Thank you for all your advise and help. John ----- Original Message Follows ----- > Sorry to hear about the issues, I have several acers and > we had a similar but easily fixed problem. > > The poor airflow is really bad dust protection, So what we > do is use a household vacuum cleaner and the crevice tool > (narrow slot thing) to vacuum all the cooling ports. > Diagnostics usually show a 15 - 20 degree drop in the CPU > temp after this. No need to open the Laptop, but it pays > to not do while its running. > > Could be worth a try

1 0

Before you install Fedora 5...
by Ian McDonald 18 Mar '06

18 Mar '06

>From http://lwn.net/Articles/175793/ Fedora core 5 will (temporarily) break non-GPL modules [Posted March 16, 2006 by corbet] Many Fedora users are anxiously waiting for the Fedora Core 5 release, scheduled for Monday, March 20. Be warned that some of you may have to wait a little longer, however: the kernel shipped with FC5 effectively disallows the loading of any non-GPL modules. That behavior was a mistake, and a fix has already been made, but it is too late to get that fix into the initial FC5 release. So binary module users will want to wait until the first errata kernel is released (a few days, at most) before upgrading. -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

3 4

Re: [wlug] Looking for HDD
by Matthew Browne (DSL HN) 16 Mar '06

16 Mar '06

You could try PBTech too, they list that model on their website. http://www.pbtechnz.com/?item=HDDWD1039 They say to call for stock but in practise I find they often have stock when they say that. Matt Browne

1 0

Looking for HDD
by Jodi Thomson 16 Mar '06

16 Mar '06

Hi Folks Am on the scrounge here We've had to send a drive off for data recovery. However it's a relatively recent model and the data recovery company has no parts for it, they need the heads. Therefore we are looking for a 'doner' drive that matches the following: Western Digital Caviar SATA 80GB Model: WD800JD - 60LSA0 (Last 6 Digits MUST be exact) Date of Manufacture: 16 OCT 2005 (give or take 1 month) We're willing to pay for a replacement. Does anyone have one of these lying around spare? Cheers Jodi ___________________________________________________ Jodi Thomson, Mr (BA, A+, MCP) IT Support Engineer - Turbo Investments Group Ltd Phone: +64 6 834-0537 ext 1008 cell: +64 21 799 961 jodi.thomson(a)turbogroup.co.nz "Right now I'm having amnesia and deja vu at the same time. I think I've forgotten this before." DISCLAIMER: This electronic message together with any attachments is confidential. If you are not the intended recipient, do not copy, disclose or use the contents in any way. Please also advise us by return e-mail that you have received the message and then please destroy. Turbo Investments Group Ltd is not responsible for any changes made to this message and / or any attachments after sending by Turbo Investments Group Ltd. We use virus scanning software but exclude all liability for viruses or anything similar in this email or any attachment.

4 6

Re: [wlug] Ubuntu security risk
by Martin, Anthony (NZ) 14 Mar '06

14 Mar '06

Hi Aristotle, Thanks for the advice on my message being beaten by Matthias. It's pleasing to see people like yourself berating others when they are trying to help or advise other people. It's good to feel part of the community. As for the 15hours behind Mathias, I get my mail from the WLUG in digest form once a day. Hope you have an awesome day Aristotle. Me - I have work to do.

2 1

Ubuntu security risk
by Martin, Anthony (NZ) 13 Mar '06

13 Mar '06

Ran across this today regarding possible password leaks. http://www.ubuntuforums.org/showthread.php?t=143334 You might want to review any existing Ubuntu servers pronto. While I didn't see these same values on my Debian Sarge server, that's only one data point. Now I'm off to check my Alpha server. Yet another reason to use temporary passwords when installing systems. Best Regards, Anthony Martin

2 1

WLUG / NZ Linux Wiki Upgrade
by Matt Brown 13 Mar '06

13 Mar '06

Hi All, The WLUG / NZ Linux Wiki has been upgraded from a very old 2002 version of PHPwiki to the latest codebase (1.3.11p1). If you notice any serious problems or regressions please let me know (off list preferably). Cheers -- Matt Brown matt(a)mattb.net.nz Mob +64 21 611 544 www.mattb.net.nz

1 0

Slashdot | Root Password Readable in Clear Text with Ubuntu
by Matthias Dallmeier 13 Mar '06

13 Mar '06

http://it.slashdot.org/it/06/03/13/0525254.shtml FYI -- Matthias

1 0

Re: [wlug] Novell hopes its next desktop will leapfrog Windows -- IDEAS (a little long)
by Mathew Carley 11 Mar '06

11 Mar '06

>>"When Microsoft Vista ships it will catch up to us in a number of areas, but we'll enjoy six months where Novell's Linux desktop is in the lead," Well, I think Novell just needs to start cracking the cogs of it's marketing machine. Take out some Ad's on the telly. Do the Mozilla/ImpeachBush.org/open-source thing and take out full-pagers in (for example) the New Zealand Herald (Or Helsingin Sanomat, Iltalehti or YLE for that matter - not that linux isn't already well known here). I'm sure that Saatchi & Saatchi or Admark or even a company that uses OSS to develop its advertising would be able to come up with a half decent marketing campaign to cover the 6 months between SLED and Windows Vista's release. I remember at the Novell Conference in September 2004 at the Hilton in Auckland had a pretty good little movie that ran for a few minutes (if you were there, I'm talking about the one where they had the cartoon thing based on LOTR) - something like that targeting the main reasons to BUY Linux or buy a machine with Linux on it might work quite well... Even though Microsoft hasn't really pushed out any new consumer products (save the XBOX 360 and maybe a couple of other things) in the past 4, nearly 5 years, I still see their ads all over the world on TV, billboards, street-sign ads etc in Finland, Sweden, Estonia, New Zealand, Australia, Germany, Singapore, Japan, Netherlands, France/Monaco, Italy and where ever the hell else I have been lately. Microsoft's ads are always about "We help you do what it is you want to do... productivity in the office, we help your kids learn blah blah blah"... maybe if Novell can do a "We do all that too, with an interface that makes sense, and far less problems with Viruses and Spyware! Plus out search tools are better... this is prettier, that is better, you can still do everything you do on your MS OS and for a cheaper price!" At least here Linux is used in all the banking kiosks which are located next to most ATMs that are not outside, Public Libraries, Private/University Libraries, Info Kiosks, certain Government departments, CyberCafes (Ok, well they are coffee places like Starbucks, but they have free Internet or WiFi access if you buy a coffee)... and so on. The fact that Linux is fairly widely used in comparison has kind of provided an answer to the interface question, though: Most people don't give a toss what interface they are using, so long as it works. For example, Kirjasto Kymanen (the library next to the central railway station), The "Queue Up" computers are all Linux (not sure which distro) running KDE 3.3, with Firefox, aMSN, OpenOffice 1.x and a couple of other little apps. People just go on there to check email, do banking etc, and don't seem to have any trouble adapting from Windows to Linux to Mac to whatever. There are some Windows NT and XP machines available, as well as some Macs, but you have to reserve them specifically. Anyway, getting back to my original point: yes, Linux is technically superior. Yes, Mac OS is easier to use. But it's Microsoft thats been marketing it's arse off for the past 20 years getting hundreds of millions of consumers to buy their crap. Perhaps a few side deals with the top 5 OEMs helped but thats not what I am getting at. So, Novell, start marketing now (build up some hype a-la MS), get a "Think Secret"-style fan club/insider info source site and then do a fantastic release a-la Apple... perhaps do it differently, you know... Take out the Aotea Centre or something and do a big product release. Even better if you can get it on TV3 or the news or something. Have like... "NovCon 2006" or "Novell Consumer Fair" of some sort; you know; get your shit together. Maybe some free CDs or additional software... Even better if live-installation is included for those that buy the new NLED or something - all without erasing documents and so on (OK maybe some of this is not so feasible at something the size of what I am imagining) OR... Trade in your Microsoft Software (Windows/Office, non-pirate copies of course) for a FREE copy of NLED! Or how about getting someone like [insert random tv-personality here, I will choose Kerry Woodham because I know her from when I was a kid - or even John Campbell] to like, install and show off how pretty the new interface is... on like Good Morning New Zealand or Campbell Live or whatever shows are on these days... that covers your bored housewife demographic, depending on the time of day its shown. Partner with like, Dick Smith, Harvey Norman or someone like that to get it installed on new machines, or some other nation-wide chain that services computers (I don't know if DSE does this...) to get this up and running on some more machines. It can be done, it will more than likely cost some money, but I'm sure it would be worth it. Perhaps some Mom-and-pop style Computer Stores (SmartPC, Millennium Technology, PB Tech, any others I have missed) might like to partner with Novell too... tangible benefits? We all know Microsoft offers incentives, now, don't we! I'll end it here, I am sure you all get my drift :) -- Regards Mathew Carley **UUSI** Nopeita tietokonepalveluita ja ohjausta @ www.fingeekit.com (Avaamme pian!) HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Phone (Suomalainen Yhteyshenkilö/Svensk Kontakt): +358 4 4925 0459 Phone (Helsinki Office): +358 9 2316 3712 Phone (Finland Cellular/English): +358 4 0418 6944 **NEW** Phone (France Cellular): +33 6 1811 9475 Sony IVE Number: 243 700 9835 Skype: mgcarley MSN Messenger: mgcarley(a)hostenz.co.nz The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

1 0

Upcoming WLUG committee meeting (1 week yesterday)
by Craig Box 10 Mar '06

10 Mar '06

As per the WLUG charter, please note that there is a WLUG executive committee meeting one week from today. If you wish to get an item on the agenda for this meeting, please email it to secretary(a)wlug.org.nz. Craig

1 0