- wlug - list.wlug.org.nz

Full partition. Any ideas?
by Michael McDonald 15 Feb '11

15 Feb '11

Hi all I have a friend with a problem. His Ubuntu system (2.26.32-x) won't boot. Booted from CD. Gparted showed partition partition size (ext3/ext4) is 120GB and 100% full. Disk analyser only shows 20GB in files (though 120GB on partition). Robbed 2GB from swap file to add to partition, but partition still shows 0% free. Can read files in the partition, but have no idea where that 100GB has gone. Since disk has another unused partition, plan of attack at the moment is to install 10.10 in the unused partition and recover data as needed. Anyone else seen this problem before? Any suggestions? Michael

3 2

Network set up
by stephen pearce 15 Feb '11

15 Feb '11

Hi I wonder if anyone could help me with suggestions for software and configeration for the following hardware network set up :- wifi link to isp via router(A). Local ip allocation by router(A) (say 192.168.2.3 ... but could be different depending upon state of router and other connections to it.) Wifi network card(A) in relatively low spec pc (B)... ideally 256-512 M memory ... x86 ... cd live or flash drive boot ... hopefully also sans monitor and keyboard and supporting web based interface for set up from local network administered by C (below) Ether Net card in same pc(B) connects to a separate wifi router(C) .. which sees this link as its route to the intenet/isp and accepts ip allocation from B .. Router(C) allocates local ip numbers on another domain (say 10.1.1.1-256) Router C supports both wifi and ehternet connections. I suppose B is a sort of router .. except that it is working in reverse to the normal expectation? Suggestons for live cd or flash distributions that might suit B appreciated .. as would commnets on how to set up router C Thanks -- Stephen Pearce Critical Care Whangarei ph 021 390 997

2 1

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 13 Feb '11

13 Feb '11

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- !!! Why should you care about Debian? Debian "Squeeze" Pizza Party! On February 6th, 2011 after 2 years of development effort a new stable version of the Debian GNU/Linux OS was released. Those of you who know, know this is a reason to celebrate. Those of you who would like to learn more about why this is a momentous occasion should come along and check out what the new 6.0 version codenamed "Squeeze" has to offer. There are a heap of new features and interesting aspects to this release, a demo of how easy it is to install and use, and a presentation/overview of the Debian Project will be presented. Pizza and refreshments will be provided, come join us in the celebration! Meeting Room at University of Waikato TBA 7pm, Monday 21st Feb (we will not be having our regular meeting on the 28th this month). http://www.wlug.org.nz/ http://wlug.org.nz/~gnubie/splash-squeeze.png

1 0

Knoppix 6.4
by D. 07 Feb '11

07 Feb '11

Hi, guis, As a newbe-to-nominal Linux user am delighted by (live) Knoppix 6.4: it sees Windows' FAT32 partitions by a mere click on its interface and can save files on C:\ without any fuss. Connecting to Broadband is automatic; as fast as in Windows or faster. Such connection seems to mean avoiding known Windows' prerogatives (plus unknown ones) and it may also be possible skirting Windows by saving files of a dedicated DOS partition. Ditar.

2 1

24th Jan - No club meeting tonight.
by Chris O'Halloran 23 Jan '11

23 Jan '11

Hello all, Just to clarify if there was any confusion, there is no formal WLUG meeting tonight at the Uni. Having enjoyed a good break over the holiday period, the WLUG committee will advise of the upcoming meeting schedule following the next committee meeting. I hope you've enjoyed all enjoyed some time in the sun and catching up with friends and family. Chris O'Halloran. WLUG President 2011.

1 0

Thursday Night Christmas Curry
by David Hallett 13 Jan '11

13 Jan '11

We're looking to start running Hamilton curry nights again. The recent Christmas Curry had a good number of registrations. It was there that a suggestion was made there to reinstate the Hamilton Thursday Night Curry. If you are interested in attending (even irregularly) please let me know you intention, and whether you prefer weekly, fortnightly, or monthly. I'm going to use the NZCS Events System ( http://www.nzcs.org.nz/events/waikato_bop) to manage RSVPs and booking, thus significantly reducing the administration overhead. Kind regards, David Hallett, BSc, MNZCS ITCP P.O. Box 15-516 Hamilton, New Zealand Phone: +64-7-210 5520 Mobile: +64-21-802 256

1 0

fiber attached storage
by Gregory Machin 09 Jan '11

09 Jan '11

Hi. I have 3 servers , and 4 fiber cards (2 of infineon with intel chip, and 2 with qlogic chip ) . So what I want to have one server as storage and 2 running esxi, booting over the fiber, off the storage server. I'm looking for a Howto on setting up a storage server that presents storage over fiber. I have worked with Xiotech fiber storage devices, from an administration of resources, so my knowledge of fibre technology is limited. But this is a home project build on donated hardware, so I need to build my own fiber storage server .. I have googled and yet to find a clear howto on this... Any input welcome Thanks Gregory Machin -- - TLA - three letter acronym ... - We are loosing the art of communication through progress.. Proverbs 27:17 (New International Version) 17 As iron sharpens iron, so one man sharpens another.

2 2

Re: [wlug] wlug Digest, Vol 235, Issue 2
by noel villamor 05 Jan '11

05 Jan '11

How old is this Sony Viao laptop? Some parts may be salvaged if we have model info.

2 1

Re: [wlug] Laptop
by Sam Lin 04 Jan '11

04 Jan '11

Or leave the laptop until eDay2011? Regards, Sam > Message: 1 > Date: Mon, 03 Jan 2011 14:13:15 +1300 > From: John <jaytee(a)clear.net.nz> > To: Waikato Users Group <wlug(a)list.waikato.ac.nz> > Subject: [wlug] Laptop > > Hi All, > I have a Sony Viao laptop with a dead main board no h/d. The screen, > CPU, or sundry ports may be required by someone before it is deposed of. > Please contact me if interested. > Regards John

4 3

Laptop
by John 03 Jan '11

03 Jan '11

Hi All, I have a Sony Viao laptop with a dead main board no h/d. The screen, CPU, or sundry ports may be required by someone before it is deposed of. Please contact me if interested. Regards John

1 0

Fwd: help please
by Bruce Kingsbury 23 Dec '10

23 Dec '10

---------- Forwarded message ---------- From: John Torrance <jtorrance(a)slingshot.co.nz> Date: 27 November 2010 23:49 Subject: help please To: wlug-owner(a)list.waikato.ac.nz I sent this request for help but it was bounced for some reason. I have been unable to update my ubuntu - when using the command line, I get the following errors. Could someone help me please Cheers John warning, in file '/var/lib/dpkg/available' near line 61945 package 'flyback': error in Version string '0.6.1_r111-1': invalid character in version number Setting up python-wxgtk2.8 (2.8.11.0-0ubuntu4) ... Compiling /usr/lib/python2.6/dist-packages/wx-2.8-gtk2-unicode/wx/_controls.py ... SyntaxError: ("keyword can't be an expression", ('/usr/lib/python2.6/dist-packages/wx-2.8-gtk2-unicode/wx/_controls.py', 5089, None, 'Data = property(GetData,SetData<doc="See `GetData` and `SetData`") \n')) pycentral: pycentral pkginstall: error byte-compiling files (429) pycentral pkginstall: error byte-compiling files (429) dpkg: error processing python-wxgtk2.8 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of python-wxversion: python-wxversion depends on python-wxgtk2.8 (>= 2.8.6.1-0ubuntu2) | python-wxgtk2.6 (>= 2.6.3.2.2-1ubuntu2); however: Package python-wxgtk2.8 is not configured yet. Package python-wxgtk2.6 is not installed. dpkg: error processing python-wxversion (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. dpkg: dependency problems prevent configuration of python-wxtools: python-wxtools depends on python-wxgtk2.8; however: Package python-wxgtk2.8 is not configured yet. dpkg: error processing python-wxtools (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. dpkg: dependency problems prevent configuration of python-wxgtk2.8-dbg: python-wxgtk2.8-dbg depends on python-wxgtk2.8 (= 2.8.11.0-0ubuntu4); however: Package python-wxgtk2.8 is not configured yet. dpkg: error processing python-wxgtk2.8-dbg (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: python-wxgtk2.8 python-wxversion python-wxtools python-wxgtk2.8-dbg E: Sub-process /usr/bin/dpkg returned an error code (1) -- Disclaimer: By sending an email to any of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message.

3 2

iSCSI as common storage
by Gregory Machin 12 Dec '10

12 Dec '10

Hi. I would like to avoid setting up a file server as back-end to my web server cluster, as this would give a single point of failure. Give we are running a iSCSI array of 8 nodes with redundancy and replication etc, I would like to take advantage of this. It's the first time I'll be working with iSCSI from within Linux. A) is it possible and b) if it is, how do I best configure multiple machine to use the same iSCSI LUN / data store, as a "common share " . I assume I need a more advance file system that ext3. Is there a howto on this ? I have found anything on google yet .. still digging.... Thanks -- - TLA - three letter acronym ... - We are loosing the art of communication through progress.. Proverbs 27:17 (New International Version) 17 As iron sharpens iron, so one man sharpens another.

3 3

Free to Good Home:
by Wayne Grimsey 06 Dec '10

06 Dec '10

Hi WLUGers My wife has an old PC circa 2000. It's still in working order. included are a monitor, cables, box (holding hard disc, CD-ROM and floppy disk), keyboard and mouse. OS may be Windows 98 and also may be loaded with Office 2000. Haven't booted it for a while. This machine is free to a good home. For anyone who may want to play around with an old PC Let me know if you're interested or have any questions. Wayne

3 2

Waikato ICT Christmas Curry
by David Hallett 05 Dec '10

05 Dec '10

Waikato ICT Christmas Curry Wednesday 15 December 2010: 6:30 pm - 10:00 pm Little India 4 Alexandra Street Cnr Alexandra & Hood Streets Hamilton Kick-start the summer heat with a delicious curry dinner held for the Hamilton ICT industry. NZCS is holding a curry banquet at Little India with festive company and the opportunity to chat and network with others. As well as the opportunity for informal discussion, Waikato/BOP NZCS Councillor, David Hallett is available to discuss the IT industry and profession in New Zealand, opportunities, and the big picture of where we're heading and why. Registration Details It is essential to book for this event - no door registrations can be accepted! https://www.nzcs.org.nz/events/waikato_bop/261-Waikato_ICT_Christmas_Curry Cash Bar Operating NB: The event includes wine provided by NZCS, however additional drinks are at bar costs, payable to the wait staff.

1 0

CentOS release 5.4 (Final) + Nic Bonding + machine goes out of network randomly + 2.6.18-164.6.1.el5 #1 SMP kernel
by Narender 24 Nov '10

24 Nov '10

Hi We are facing a strange problem from past few days. Below are the logs attached for ref. We are using nic bonding to our dell server. It has centos 5.4 installed with 4 nic cards. This machine was working good from past few months. But from previous 2-3 days it went out of network by itself. Any pointer or help would be much appreciated. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ cat /proc/cpuinfo processor : 15 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Xeon(R) CPU E5530 @ 2.40GHz stepping : 5 ============================================================================================== [root(a)S log]# uname -a Linux ABC.NETXXXXXX 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:12:36 EST 2009 x86_64 x86_64 x86_64 GNU/Linux ============================================================================================ [root(a)S log]# cat /etc/redhat-release CentOS release 5.4 (Final) [root(a)SJC-SRCH-03-R ~]# dmesg |grep eth | more eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 90, node addr 00219b8fd3bc eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 98, node addr 00219b8fd3be eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 106, node addr 00219b8fd3c0 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 114, node addr 00219b8fd3c2 cnic: Added CNIC device: eth0 cnic: Added CNIC device: eth1 cnic: Added CNIC device: eth2 cnic: Added CNIC device: eth3 bonding: bond0: Adding slave eth0. bnx2: eth0: using MSIX bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: enslaving eth0 as a backup interface with a down link. bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: Adding slave eth1. bnx2: eth1: using MSIX bnx2i: iSCSI not supported, dev=eth1 bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: enslaving eth1 as a backup interface with a down link. bnx2i: iSCSI not supported, dev=eth1 bonding: bond0: link status definitely up for interface eth0. bonding: bond0: making interface eth0 the new active one. bonding: bond0: link status definitely up for interface eth1. bonding: bond0: link status definitely down for interface eth1, disabling it bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. bnx2: eth2: using MSIX ADDRCONF(NETDEV_UP): eth2: link is not ready bnx2i: iSCSI not supported, dev=eth2 bnx2i: iSCSI not supported, dev=eth2 bnx2: eth2: using MSIX ADDRCONF(NETDEV_UP): eth2: link is not ready bnx2i: iSCSI not supported, dev=eth2 bnx2i: iSCSI not supported, dev=eth2 bnx2: eth3: using MSIX ADDRCONF(NETDEV_UP): eth3: link is not ready bnx2i: iSCSI not supported, dev=eth3 bnx2i: iSCSI not supported, dev=eth3 bnx2: eth3: using MSIX ADDRCONF(NETDEV_UP): eth3: link is not ready bnx2i: iSCSI not supported, dev=eth3 bnx2i: iSCSI not supported, dev=eth3 bnx2: eth2: using MSIX ADDRCONF(NETDEV_UP): eth2: link is not ready bnx2i: iSCSI not supported, dev=eth2 bnx2: eth2: using MSIX ADDRCONF(NETDEV_UP): eth2: link is not ready bnx2i: iSCSI not supported, dev=eth2 bnx2i: iSCSI not supported, dev=eth2 bnx2: eth3: using MSIX ADDRCONF(NETDEV_UP): eth3: link is not ready bnx2i: iSCSI not supported, dev=eth3 bnx2: eth3: using MSIX ADDRCONF(NETDEV_UP): eth3: link is not ready bnx2i: iSCSI not supported, dev=eth3 bnx2i: iSCSI not supported, dev=eth3 bonding: bond0: Removing slave eth1 bonding: bond0: releasing active interface eth1 bonding: bond0: making interface eth0 the new active one.ease 5.4 (Final) bonding: bond0: Removing slave eth0 bonding: bond0: releasing active interface eth0 bonding: unable to remove non-existent slave eth1 for bond bond0. bonding: bond0: Adding slave eth0. bnx2: eth0: using MSIX bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: enslaving eth0 as a backup interface with a down link. bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: Adding slave eth1. bnx2: eth1: using MSIX bnx2i: iSCSI not supported, dev=eth1 bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: enslaving eth1 as a backup interface with a down link. bonding: bond0: link status definitely up for interface eth0. bonding: bond0: making interface eth0 the new active one. bonding: bond0: link status definitely up for interface eth1. bnx2i: iSCSI not supported, dev=eth1 bonding: bond0: link status definitely down for interface eth1, disabling it bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. bonding: bond0: Removing slave eth0 bonding: bond0: Warning: the permanent HWaddr of eth0 - 00:21:9B:8F:D3:BC - is still in use by bond0. Set the HWaddr of eth0 to a different address to avoid conflicts. bonding: bond0: releasing backup interface eth0 bonding: bond0: Removing slave eth1 bonding: bond0: releasing active interface eth1 bonding: bond0: Adding slave eth0. bnx2: eth0: using MSIX bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: enslaving eth0 as a backup interface with a down link. bnx2i: iSCSI not supported, dev=eth0 bonding: bond0: Adding slave eth1. bnx2: eth1: using MSIX bnx2i: iSCSI not supported, dev=eth1 bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: enslaving eth1 as a backup interface with a down link. bonding: bond0: link status definitely up for interface eth0. bonding: bond0: making interface eth0 the new active one. bonding: bond0: link status definitely up for interface eth1. bnx2i: iSCSI not supported, dev=eth1 bonding: bond0: link status definitely down for interface eth1, disabling it bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. =========================================================================================================================================== ============================================================================================ [root(a)S ~]# modinfo e1000 | more filename: /lib/modules/2.6.18-164.6.1.el5/kernel/drivers/net/e1000/e1000.ko version: 7.3.20-k2-NAPI license: GPL description: Intel(R) PRO/1000 Network Driver author: Intel Corporation, <linux.nics(a)intel.com> srcversion: 26DD82C709EB760C93D4103 alias: pci:v00008086d00001000sv*sd*bc*sc*i* depends: vermagic: 2.6.18-164.6.1.el5 SMP mod_unload gcc-4.1 parm: TxDescriptors:Number of transmit descriptors (array of int) parm: TxDescPower:Binary exponential size (2^X) of each transmit descriptor (array of int) parm: RxDescriptors:Number of receive descriptors (array of int) parm: Speed:Speed setting (array of int) parm: Duplex:Duplex setting (array of int) parm: AutoNeg:Advertised auto-negotiation setting (array of int) parm: FlowControl:Flow Control setting (array of int) parm: XsumRX:Disable or enable Receive Checksum offload (array of int) parm: TxIntDelay:Transmit Interrupt Delay (array of int) parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) parm: RxIntDelay:Receive Interrupt Delay (array of int) parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) parm: debug:Debug level (0=none,...,16=all) (int) ================================================================================================= [root@ ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d ============================================= root(a)S ~]# ethtool -i eth0 driver: bnx2 version: 1.9.3 firmware-version: 4.6.4 NCSI 1.0.6 bus-info: 0000:01:00.0 [========================= [root@ ~]# ethtool -i eth1 driver: bnx2 version: 1.9.3 firmware-version: 4.6.4 NCSI 1.0.6 bus-info: 0000:01:00.1 ================================ [root(a)S ~]# ethtool -i bond0 driver: bonding version: 3.4.0 firmware-version: 2 bus-info: ===================================

1 1

Re: [wlug] Wake-up call. Where to next for WLUG
by Sam Lin 21 Nov '10

21 Nov '10

Hi Rod and WLUG fellows - I am a PCBSD (or FreeBSD) user and have attended couples of WLUG activities recently including Monday meetings, Saturday workshops, SFD2008(a)Waikato University, SFD2010(a)Central Plaza and eDay2010. I have for the last few years been using and contributing to FLOSS both on *BSD and Windows, and have also been spreading the word of FLOSS whenever there is "appropriate" chance. For a long time I have usually, if not always, felt that *BSD, Linux or even FLOSS is still giving the general public a wrong impression that these are for geeks but not for the them to use. One example is that all books regarding Linux are titled something like "Building a Linux server system", "Linux systems", "xxx Programming Language Bible" etc whereas undeniably these would scare most general users away. While more general books and online tutorials for general users are coming out nowadays, these are still far less than those technical stuff. Another example is that the term Linux refers not to a OS but to a kernel, whereas general users just don't realise the difference between them nor do they care what they exactly are; all they care is - how to use those common/useful software in their daily lives. This is what the public is interested in as well as in need of the most. Linux? System administrating? Programming? These are definitely useful for techies but sorry most people just don't intend to bother them. As a side note, in NZ there used to be a user group called NZFUG (New Zealand FreeBSD User Group) but apparently they have disbanded years ago, which I believe is due to fail to draw the public's interest mainly for the similar reason. Sadly enough, all official FreeBSD webpage/ftp mirror sites in NZ were also discontinued due to the lack of maintainers for ages. I see WLUG is unfortunately following the same path. WLUG has been holding several interesting talks in the meetings as well as valuable activities, I felt WLUG (and probably other FLOSS-related user groups too) needs to focus more on the general user base. An introduction to Inkscape given by Stephen last month is a good start. I think similar tutorials/seminars about other FLOSS e.g. GIMP, Scribus etc would be helpful for both the user group and the public. While technical skills is an important part of WLUG, I think expanding and promoting FLOSS to a wider audience urgently need to be prioritised - if the user group is still to be continued. I also think that the user group had better not claim something like FLOSS/Linux but instead use the term FOSS as this otherwise would give the public an impression that all these was only for Linux, whereas in fact FLOSS exist on *BSD, Windows and other platforms. That said, by using the term "FLOSS" instead of "FLOSS/Linux" it would be less likely to limit ourselves from the otherwise potential yet wide user base. I was even dreaming that, if I were to lead the WLUG, I would rename the user group to say WFUG (Waikato FLOSS User Group) and merge those FLOSS users at the Waikato or even in NZ from other platforms - regardless of *BSD, Linux, Mac or Windows. Perhaps it is only by combining these sparse forces that could increase the odds to sustain the FLOSS community at Waikato or in NZ in the long run. Regarding the finances, I felt some expenses had not been necessary nor worth the outcomes. Software Freedom Day this year was actually not really successful as people really do not want to be disturbed in the middle of their shopping by someone proposing FLOSS. As for the Internet usage/cost, I think Internet is also not necessary in the Saturday workshops as the workshop shouldn't be a free Internet cafe (another reason is that downloading in NZ is by nature not favourable due to the restriction in the monthly Internet usage policy in NZ). To help visitors install FLOSS/ISOs these could have been prepared on disks in advance rather than repeatedly downloaded during the workshop. Another thing I felt WLUG needs to improve is communication within the user group member as well as with the public. Take eDay2010 for example, some people was told by the user group that he would be assigned the time and tasks by email before eDay whereas ultimately he didn't get any contact from the user group. Communication within the user group needs to be organised and improved. As for the communication with the public, this has largely to do with advertisement. Not many people know about WLUG and the activities the user group has been holding. There are actually many low-cost or even free yet more effective ways to advertise WLUG activities... for instance Facebook, Tweet, or "chain-email" through friends of friends etc. Just my two cents. Regards, Sam > From:?Roderick Aldridge <rod-aldridge(a)xnet.co.nz> > To:?Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Date:?Wed, 10 Nov 2010 08:24:12 +1300 > Subject:?Wake-up call. Where to next for WLUG? > > Hi WLUG members > > Most members of the committee are retiring or leaving. Nobody has > definitely indicated they are willing to stand again... > What do you want WLUG to do in the future? > What activities should we focus on? What else should we be doing? What > will get your support and continued membership? > Should we concentrate mainly on technical skills, or promoting > FOSS/Linux to a wider audience, or both? > The membership has dwindled somewhat, as have our finances, due to > reduced membership and to Software Freedom Day expenses being higher > than planned (liability insurance etc). > Should we continue as an incorporated society or become an informal > group with shared interests or disband altogether? Unless we get > enough people coming forward to hold? office and continue membership > we will have no choice but to disband. > For a quorum we need 50% of the membership or 15 members to attend, so > come to the AGM which will decide these matters. Let us know what you > what you want WLUG to do and what you can do to contribute to the > future of WLUG. > Roderick Aldridge > > > ------------------------------

4 3

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 21 Nov '10

21 Nov '10

There's a WLUG meeting tonight: ---------------------------------------------------------------------- !!! WLUG AGM ANNOUNCEMENT: Annual General Meeting, 22nd November In accordance with Rule 6 of the charter, I would like to announce to all members that the Waikato Linux Users Group (Incorporated) will be holding its Annual General Meeting on Monday, 22 November, 2010, at 7pm, at the regular meeting location of Room MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Several officers and committee members will be stepping down this year. Society membership has also gone down recently. Present and past members interested in seeing WLUG continue as an IncorporatedSociety are encouraged to attend this years AGM to meet quorum requirements and stand for election. If a quorum is established and new officers step forward, a bylaw change is proposed to be voted on. Please see the WlugCharterDiscussion for more details. Note: To be eligible to vote at the meeting you must have previously been a financial member (although not necessarily for the 2010 year) and pay your membership for 2011 at or before the AGM. To be eligible to vote or stand for office at the AGM members must have paid a subscription for the 2010 year before the AGM. If you'd like to stand for committee and have not paid for membership this year, please do this at the October Meeting or November SaturdayWorkshop. An amendment about who can vote at the meeting was passed in 2008. "That the WLUG charter be amended to allow former paid members of the WLUG of good standing, whose membership has lapsed, to vote at an AGM of the WLUG with the proviso that they rejoin the WLUG and pay a new subscription at or before the AGM."

1 0

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 18 Nov '10

18 Nov '10

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- !!! WLUG AGM ANNOUNCEMENT: Annual General Meeting, 22nd November In accordance with Rule 6 of the charter, I would like to announce to all members that the Waikato Linux Users Group (Incorporated) will be holding its Annual General Meeting on Monday, 22 November, 2010, at 7pm, at the regular meeting location of Room MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Several officers and committee members will be stepping down this year. Society membership has also gone down recently. Present and past members interested in seeing WLUG continue as an IncorporatedSociety are encouraged to attend this years AGM to meet quorum requirements and stand for election. If a quorum is established and new officers step forward, a bylaw change is proposed to be voted on. Please see the WlugCharterDiscussion for more details. Note: To be eligible to vote at the meeting you must have previously been a financial member (although not necessarily for the 2010 year) and pay your membership for 2011 at or before the AGM. To be eligible to vote or stand for office at the AGM members must have paid a subscription for the 2010 year before the AGM. If you'd like to stand for committee and have not paid for membership this year, please do this at the October Meeting or November SaturdayWorkshop. An amendment about who can vote at the meeting was passed in 2008. "That the WLUG charter be amended to allow former paid members of the WLUG of good standing, whose membership has lapsed, to vote at an AGM of the WLUG with the proviso that they rejoin the WLUG and pay a new subscription at or before the AGM."

1 0

Re: [wlug] AGM - Would be grateful for a lift.
by Wayne Grimsey 16 Nov '10

16 Nov '10

Hi John. Thanks for your response. Yes, my phone number is 838 2007 Best regards Wayne > From: wlug-request(a)list.waikato.ac.nz > Subject: wlug Digest, Vol 233, Issue 5 > To: wlug(a)list.waikato.ac.nz > Date: Sun, 14 Nov 2010 12:00:02 +1300 > > Send wlug mailing list submissions to > wlug(a)list.waikato.ac.nz > > To subscribe or unsubscribe via the World Wide Web, visit > http://list.waikato.ac.nz/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)list.waikato.ac.nz > > You can reach the person managing the list at > wlug-owner(a)list.waikato.ac.nz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of wlug digest..." > > > Today's Topics: > > 1. Re: Hello from Wayne Grimsey (John Billings) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 13 Nov 2010 18:56:27 +1300 > From: John Billings <john(a)nimhq.net> > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Subject: Re: [wlug] Hello from Wayne Grimsey > Message-ID: > <AANLkTinTYw5eBrACon1phcuhw93UyATTReJyotj3S-MR(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi Wayne, > > The workshop meeting was canceled. I can give you a ride to the AGM. > If any other members need a ride or anything let us know, else please > let one of the committee members know your phone number, we may need > to call upon you to vote if we can't make quorum. > > Cheers, > John > > On Sat, Nov 13, 2010 at 10:27 AM, Wayne Grimsey <wgrimsey(a)hotmail.com> wrote: > > Hi Team. > > I would've been keen to come to the workshop today. However, I am down in > > Dunedin for a few days. > > I am keen to attend the AGM on the 22nd. ?I may need to get a lift with some > > really nice person to make it there (I'm currently living in Whitiora). > > Have a great day > > Wayne Grimsey > > > >> From: wlug-request(a)list.waikato.ac.nz > >> Subject: wlug Digest, Vol 233, Issue 3 > >> To: wlug(a)list.waikato.ac.nz > >> Date: Fri, 12 Nov 2010 12:00:03 +1300 > >> > >> Send wlug mailing list submissions to > >> wlug(a)list.waikato.ac.nz > >> > >> To subscribe or unsubscribe via the World Wide Web, visit > >> http://list.waikato.ac.nz/mailman/listinfo/wlug > >> or, via email, send a message with subject or body 'help' to > >> wlug-request(a)list.waikato.ac.nz > >> > >> You can reach the person managing the list at > >> wlug-owner(a)list.waikato.ac.nz > >> > >> When replying, please edit your Subject line so it is more specific > >> than "Re: Contents of wlug digest..." > >> > >> > >> Today's Topics: > >> > >> 1. Re: ANNOUNCEMENT: Annual General Meeting, 22nd November > >> (Bruce Kingsbury) > >> 2. WLUG Fixit Meeting tomorrow (Meeting Reminder bot) > >> > >> > >> ---------------------------------------------------------------------- > >> > >> Message: 1 > >> Date: Thu, 11 Nov 2010 14:57:18 +1300 > >> From: Bruce Kingsbury <zcat(a)zcat.geek.nz> > >> To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > >> Subject: Re: [wlug] ANNOUNCEMENT: Annual General Meeting, 22nd > >> November > >> Message-ID: > >> <AANLkTikz+gnSMZbYApPwuoUuo5zNm=oApD-F-qUJow2q(a)mail.gmail.com> > >> Content-Type: text/plain; charset=ISO-8859-1 > >> > >> REMINDER: Annual General Meeting, 22nd November > >> > >> In accordance with Rule 6 of the charter, I would like to announce to > >> all members that the Waikato Linux Users Group (Incorporated) will be > >> holding its Annual General Meeting on Monday, 22 November, 2010, at > >> 7pm, at the regular meeting location of Room MS4.G.02 > >> > >> Several officers and committee members will be stepping down this > >> year. Society membership has also gone down recently. Present and past > >> members interested in seeing WLUG continue as an IncorporatedSociety > >> are encouraged to attend this years AGM to meet quorum requirements > >> and stand for election. > >> > >> Note: > >> > >> To be eligible to vote at the meeting you must have previously been a > >> financial member (although not necessarily for the 2010 year) and pay > >> your membership for 2011 at or before the AGM. > >> To be eligible to vote or stand for office at the AGM members must > >> have paid a subscription for the 2010 year before the AGM. > >> > >> > >> An amendment about who can vote at the meeting was passed in 2008. > >> > >> "That the WLUG charter be amended to allow former paid members of the > >> WLUG of good standing, whose membership has lapsed, to vote at an AGM > >> of the WLUG with the proviso that they rejoin the WLUG and pay a new > >> subscription at or before the AGM." > >> > >> > >> > >> Also the list software seems to keep rejecting this from Rod so I'll > >> attach it again here: > >> > >> > >> From: Roderick Aldridge <rod-aldridge(a)xnet.co.nz> > >> To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > >> Date: Tue, 09 Nov 2010 13:00:16 +1300 > >> Subject: Wake-up call. Where to next for WLUG? > >> Hi WLUG members > >> > >> Most members of the committee are retiring or leaving. Nobody has > >> definitely indicated they are willing to stand again. I am President > >> of the PC Computer Club so I am willing to stand again for Committee > >> only, and only if we can get the support of members. > >> We need a president, vice-president, secretary, treasurer and 3 > >> committee members to continue as an incorporated society. > >> > >> What do you want WLUG to do in the future? > >> What activities should we focus on? What else should we be doing? What > >> will get your support and continued membership? > >> Should we concentrate mainly on technical skills, or promoting > >> FOSS/Linux to a wider audience, or both? > >> > >> The membership has dwindled somewhat, as have our finances, due to > >> reduced membership and to Software Freedom Day expenses being higher > >> than planned (liability insurance etc). > >> > >> Should we continue as an incorporated society or become an informal > >> group with shared interests or disband altogether? Unless we get > >> enough people coming forward to hold office and continue membership > >> we will have no choice but to disband. > >> > >> For a quorum we need 50% of the membership or 15 members to attend, so > >> come to the AGM which will decide these matters. Let us know what you > >> what you want WLUG to do and what you can do to contribute to the > >> future of WLUG. > >> > >> According to the charter only those people who were paid members in a > >> previous financial year (not necessarily for the 2010 year) and who > >> have signed a membership form for the next financial year will be > >> considered eligible to vote at the AGM. > >> > >> Roderick Aldridge > >> > >> > >> ------------------------------ > >> > >> Message: 2 > >> Date: Fri, 12 Nov 2010 06:27:06 +1300 > >> From: Meeting Reminder bot <bot(a)wlug.org.nz> > >> To: WLUG Committee Mailing List <wlug(a)list.waikato.ac.nz> > >> Subject: [wlug] WLUG Fixit Meeting tomorrow > >> Message-ID: <E1PGavS-0007JH-BF(a)localhost.localdomain> > >> > >> A reminder; the WLUG Fixit Meeting is tomorrow. > >> > >> ---------------------------------------------------------------------- > >> Saturday November 13th, 10:00 am to 4:00 pm > >> > >> (Postponed one week due to a planned EDay (http://eday.org.nz/) on Nov > >> 6th) > >> > >> (Cancelled due to the TWP being very unhappy about our excessive internet > >> usage) > >> > >> > >> ------------------------------ > >> > >> _______________________________________________ > >> wlug mailing list > >> wlug(a)list.waikato.ac.nz > >> http://list.waikato.ac.nz/mailman/listinfo/wlug > >> > >> > >> End of wlug Digest, Vol 233, Issue 3 > >> ************************************ > > > > _______________________________________________ > > wlug mailing list | wlug(a)list.waikato.ac.nz > > Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug > > > > > > > ------------------------------ > > _______________________________________________ > wlug mailing list > wlug(a)list.waikato.ac.nz > http://list.waikato.ac.nz/mailman/listinfo/wlug > > > End of wlug Digest, Vol 233, Issue 5 > ************************************

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 14 Nov '10

14 Nov '10

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- !!! WLUG AGM ANNOUNCEMENT: Annual General Meeting, 22nd November In accordance with Rule 6 of the charter, I would like to announce to all members that the Waikato Linux Users Group (Incorporated) will be holding its Annual General Meeting on Monday, 22 November, 2010, at 7pm, at the regular meeting location of Room MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4) Several officers and committee members will be stepping down this year. Society membership has also gone down recently. Present and past members interested in seeing WLUG continue as an IncorporatedSociety are encouraged to attend this years AGM to meet quorum requirements and stand for election. If a quorum is established and new officers step forward, a bylaw change is proposed to be voted on. Please see the WlugCharterDiscussion for more details. Note: To be eligible to vote at the meeting you must have previously been a financial member (although not necessarily for the 2010 year) and pay your membership for 2011 at or before the AGM. To be eligible to vote or stand for office at the AGM members must have paid a subscription for the 2010 year before the AGM. If you'd like to stand for committee and have not paid for membership this year, please do this at the October Meeting or November SaturdayWorkshop. An amendment about who can vote at the meeting was passed in 2008. "That the WLUG charter be amended to allow former paid members of the WLUG of good standing, whose membership has lapsed, to vote at an AGM of the WLUG with the proviso that they rejoin the WLUG and pay a new subscription at or before the AGM."

1 0

Re: [wlug] Hello from Wayne Grimsey
by Wayne Grimsey 13 Nov '10

13 Nov '10

Hi Team. I would've been keen to come to the workshop today. However, I am down in Dunedin for a few days. I am keen to attend the AGM on the 22nd. I may need to get a lift with some really nice person to make it there (I'm currently living in Whitiora). Have a great day Wayne Grimsey > From: wlug-request(a)list.waikato.ac.nz > Subject: wlug Digest, Vol 233, Issue 3 > To: wlug(a)list.waikato.ac.nz > Date: Fri, 12 Nov 2010 12:00:03 +1300 > > Send wlug mailing list submissions to > wlug(a)list.waikato.ac.nz > > To subscribe or unsubscribe via the World Wide Web, visit > http://list.waikato.ac.nz/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)list.waikato.ac.nz > > You can reach the person managing the list at > wlug-owner(a)list.waikato.ac.nz > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of wlug digest..." > > > Today's Topics: > > 1. Re: ANNOUNCEMENT: Annual General Meeting, 22nd November > (Bruce Kingsbury) > 2. WLUG Fixit Meeting tomorrow (Meeting Reminder bot) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 11 Nov 2010 14:57:18 +1300 > From: Bruce Kingsbury <zcat(a)zcat.geek.nz> > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Subject: Re: [wlug] ANNOUNCEMENT: Annual General Meeting, 22nd > November > Message-ID: > <AANLkTikz+gnSMZbYApPwuoUuo5zNm=oApD-F-qUJow2q(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > REMINDER: Annual General Meeting, 22nd November > > In accordance with Rule 6 of the charter, I would like to announce to > all members that the Waikato Linux Users Group (Incorporated) will be > holding its Annual General Meeting on Monday, 22 November, 2010, at > 7pm, at the regular meeting location of Room MS4.G.02 > > Several officers and committee members will be stepping down this > year. Society membership has also gone down recently. Present and past > members interested in seeing WLUG continue as an IncorporatedSociety > are encouraged to attend this years AGM to meet quorum requirements > and stand for election. > > Note: > > To be eligible to vote at the meeting you must have previously been a > financial member (although not necessarily for the 2010 year) and pay > your membership for 2011 at or before the AGM. > To be eligible to vote or stand for office at the AGM members must > have paid a subscription for the 2010 year before the AGM. > > > An amendment about who can vote at the meeting was passed in 2008. > > "That the WLUG charter be amended to allow former paid members of the > WLUG of good standing, whose membership has lapsed, to vote at an AGM > of the WLUG with the proviso that they rejoin the WLUG and pay a new > subscription at or before the AGM." > > > > Also the list software seems to keep rejecting this from Rod so I'll > attach it again here: > > > From: Roderick Aldridge <rod-aldridge(a)xnet.co.nz> > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Date: Tue, 09 Nov 2010 13:00:16 +1300 > Subject: Wake-up call. Where to next for WLUG? > Hi WLUG members > > Most members of the committee are retiring or leaving. Nobody has > definitely indicated they are willing to stand again. I am President > of the PC Computer Club so I am willing to stand again for Committee > only, and only if we can get the support of members. > We need a president, vice-president, secretary, treasurer and 3 > committee members to continue as an incorporated society. > > What do you want WLUG to do in the future? > What activities should we focus on? What else should we be doing? What > will get your support and continued membership? > Should we concentrate mainly on technical skills, or promoting > FOSS/Linux to a wider audience, or both? > > The membership has dwindled somewhat, as have our finances, due to > reduced membership and to Software Freedom Day expenses being higher > than planned (liability insurance etc). > > Should we continue as an incorporated society or become an informal > group with shared interests or disband altogether? Unless we get > enough people coming forward to hold office and continue membership > we will have no choice but to disband. > > For a quorum we need 50% of the membership or 15 members to attend, so > come to the AGM which will decide these matters. Let us know what you > what you want WLUG to do and what you can do to contribute to the > future of WLUG. > > According to the charter only those people who were paid members in a > previous financial year (not necessarily for the 2010 year) and who > have signed a membership form for the next financial year will be > considered eligible to vote at the AGM. > > Roderick Aldridge > > > ------------------------------ > > Message: 2 > Date: Fri, 12 Nov 2010 06:27:06 +1300 > From: Meeting Reminder bot <bot(a)wlug.org.nz> > To: WLUG Committee Mailing List <wlug(a)list.waikato.ac.nz> > Subject: [wlug] WLUG Fixit Meeting tomorrow > Message-ID: <E1PGavS-0007JH-BF(a)localhost.localdomain> > > A reminder; the WLUG Fixit Meeting is tomorrow. > > ---------------------------------------------------------------------- > Saturday November 13th, 10:00 am to 4:00 pm > > (Postponed one week due to a planned EDay (http://eday.org.nz/) on Nov 6th) > > (Cancelled due to the TWP being very unhappy about our excessive internet usage) > > > ------------------------------ > > _______________________________________________ > wlug mailing list > wlug(a)list.waikato.ac.nz > http://list.waikato.ac.nz/mailman/listinfo/wlug > > > End of wlug Digest, Vol 233, Issue 3 > ************************************

2 1

WLUG Fixit Meeting is today!
by Meeting Reminder bot 12 Nov '10

12 Nov '10

A reminder, the WLUG Fixit Meeting is today. ---------------------------------------------------------------------- Saturday November 13th, 10:00 am to 4:00 pm (Postponed one week due to a planned EDay (http://eday.org.nz/) on Nov 6th) (Cancelled due to the TWP being very unhappy about our excessive internet usage)

1 0

WLUG Fixit Meeting tomorrow
by Meeting Reminder bot 11 Nov '10

11 Nov '10

A reminder; the WLUG Fixit Meeting is tomorrow. ---------------------------------------------------------------------- Saturday November 13th, 10:00 am to 4:00 pm (Postponed one week due to a planned EDay (http://eday.org.nz/) on Nov 6th) (Cancelled due to the TWP being very unhappy about our excessive internet usage)

1 0

ANNOUNCEMENT: Annual General Meeting, 22nd November
by Bruce Kingsbury 11 Nov '10

11 Nov '10

ANNOUNCEMENT: Annual General Meeting, 22nd November In accordance with Rule 6 of the charter, I would like to announce to all members that the Waikato Linux Users Group (Incorporated) will be holding its Annual General Meeting on Monday, 22 November, 2010, at 7pm, at the regular meeting location of Room MS4.G.02 Several officers and committee members will be stepping down this year. Society membership has also gone down recently. Present and past members interested in seeing WLUG continue as an IncorporatedSociety are encouraged to attend this years AGM to meet quorum requirements and stand for election. If a quorum is established and new officers step forward, a bylaw change is proposed to be voted on. Please see the WlugCharterDiscussion for more details. Note: To be eligible to vote at the meeting you must have previously been a financial member (although not necessarily for the 2010 year) and pay your membership for 2011 at or before the AGM. To be eligible to vote or stand for office at the AGM members must have paid a subscription for the 2010 year before the AGM. If you'd like to stand for committee and have not paid for membership this year, please do this at the October Meeting or November SaturdayWorkshop. An amendment about who can vote at the meeting was passed in 2008. "That the WLUG charter be amended to allow former paid members of the WLUG of good standing, whose membership has lapsed, to vote at an AGM of the WLUG with the proviso that they rejoin the WLUG and pay a new subscription at or before the AGM."

1 1

Fwd: Auto-discard notification
by Bruce Kingsbury 09 Nov '10

09 Nov '10

For some reason the mailing list software doesn't like this, but perhaps it will accept it if it's posted in plaintext rather than html? ---------- Forwarded message ---------- From: Roderick Aldridge <rod-aldridge(a)xnet.co.nz> To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> Date: Wed, 10 Nov 2010 08:24:12 +1300 Subject: Wake-up call. Where to next for WLUG? Hi WLUG members Most members of the committee are retiring or leaving. Nobody has definitely indicated they are willing to stand again. I am President of the PC Computer Club so I am willing to stand again for Committee only, and only if we can get the support of members. We need a president, vice-president, secretary, treasurer and 3 committee members to continue as an incorporated society. What do you want WLUG to do in the future? What activities should we focus on? What else should we be doing? What will get your support and continued membership? Should we concentrate mainly on technical skills, or promoting FOSS/Linux to a wider audience, or both? The membership has dwindled somewhat, as have our finances, due to reduced membership and to Software Freedom Day expenses being higher than planned (liability insurance etc). Should we continue as an incorporated society or become an informal group with shared interests or disband altogether? Unless we get enough people coming forward to hold office and continue membership we will have no choice but to disband. For a quorum we need 50% of the membership or 15 members to attend, so come to the AGM which will decide these matters. Let us know what you what you want WLUG to do and what you can do to contribute to the future of WLUG. According to the charter only those people who were paid members in a previous financial year (not necessarily for the 2010 year) and who have signed a membership form for the next financial year will be considered eligible to vote at the AGM. Roderick Aldridge

1 0

Upcoming Fixit Meeting (1 week today)
by Meeting Reminder bot 05 Nov '10

05 Nov '10

The WLUG Fixit Meeting is 1 week away. ---------------------------------------------------------------------- Saturday November 13th, 10:00 am to 4:00 pm (Postponed one week due to a planned EDay (http://eday.org.nz/) on Nov 6th) SaturdayWorkshop at Te Whanau Pūtahi (http://www.wlug.org.nz/TeWhanauPutahi) the community church at the end of Oxford Street. We'll have the usual tables, power, various ISO's, Internet, coffee and light lunch, etc. If there's something you specifically want to work on please mention it on the mailing list in advance so we can study up beforehand or bring any necessary equipment. Also we're paying a little extra for hall and internet now, so a gold coin donation to help cover these costs would be greatly appreciated.

1 0

Fwd: eDay 2010
by Bruce Kingsbury 05 Nov '10

05 Nov '10

Apparently a few of our WLUG eday volunteers haven't had this email yet so I'll post it here. Also if you haven't registered but just feel like just turning up at the last minute I don't think anyone will mind too much. Attached form won't go through the mailing list so I've uploaded it at http://zcat.geek.nz/files/volunteer_guide_and_declaration_form_2010.doc ---------- Forwarded message ---------- From: Vanessa Goodchild <Vanessa.Goodchild(a)esito.org.nz> Date: 3 November 2010 17:06 Subject: eDay 2010 To: Vanessa Goodchild <Vanessa.Goodchild(a)esito.org.nz> Hi Everyone and thank you for volunteering to be part of eDay 2010 For the all-day and morning shift volunteers, please arrive by 8:30 am For the afternoon shift volunteers please arrive by 11:45 we will provide a light breakfast or - lunch depending on start time - then assign jobs and brief you for the day. · Please ensure you have sturdy covered footwear (e.g boots or sneakers not jandals or sandals) · Please find attached a volunteer guide and declaration form. I look forward to seeing you all there J Please contact me if you have any questions prior to the day. eDay 2010 Habitat for Humanity 29 Bryant Road, Te Rapa, Hamilton Sat 6 Nov, 9am – 3pm *Vanessa** Goodchild* *Industry Standards & Development Administrator* *ESITO - Electricity Supply Industry Training Organisation* *T: 07 834 4462* *M: 021 11 00 226* [image: cid:image001.jpg(a)01CB7B67.F3F79C90] <http://www.esito.org.nz/> ------------------------------ Attention: This email and any attachments are confidential and may be privileged. If you have received this email in error, please delete it immediately and inform the sender of the mistake. Statements and opinions expressed in this email are those of the author, except where the author states them, with requisite authority, to be those of ESITO. ------------------------------ -- Disclaimer: By sending an email to any of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message.

1 0

Another old computer and Eday
by Sam Lin 29 Oct '10

29 Oct '10

Hi all, I also have an old AMD Athlon desktop machine with erupted capacitors to sort out (Soltek SL-75DRV2)(no monitor sorry). This is now on trademe (Listing #: 328161960). Please let me know asap if you have a GOOD soldering skill and are willing to adopt it or otherwise I will take it down to eDay next Saturday. Regards, Sam > Date: Thu, 28 Oct 2010 10:50:11 +1300 > From: "Chris O'Halloran" <cmoman(a)gmail.com> > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Subject: [wlug] Old computers and Eday > > Hello all, > > I've got two Toshiba Satelite Laptops to give away, both very old. > > First laptop > 8M of RAM. I can get Tom's Rescue Boot Floppy for work on it but > haven't manage to get Basic Linux installed though its been a few > years since my last attempt. > > Second laptop > 32M of RAM. I can get Damn Small Linux to work on it using a CD drive. > The screen is damaged on the right side - about an 8mm strip of black pixels. > > I also have a desktop computer case that formally housed a Pentium III > motherboard circa 2001. You're also welcome to the motherboard but it > no longer goes. > > I've also got some SCSI components and tape drives if anyone is interested. > > All these will end up at eDay for recycling if no one would like them. > > Please contact me off list if you're interested. > > Cheers, > > Chris

1 0

Old computers and Eday
by Chris O'Halloran 27 Oct '10

27 Oct '10

Hello all, I've got two Toshiba Satelite Laptops to give away, both very old. First laptop 8M of RAM. I can get Tom's Rescue Boot Floppy for work on it but haven't manage to get Basic Linux installed though its been a few years since my last attempt. Second laptop 32M of RAM. I can get Damn Small Linux to work on it using a CD drive. The screen is damaged on the right side - about an 8mm strip of black pixels. I also have a desktop computer case that formally housed a Pentium III motherboard circa 2001. You're also welcome to the motherboard but it no longer goes. I've also got some SCSI components and tape drives if anyone is interested. All these will end up at eDay for recycling if no one would like them. Please contact me off list if you're interested. Cheers, Chris

1 0

No Wednesday night class tonight (Oct 27th)
by Bruce Kingsbury 26 Oct '10

26 Oct '10

Wednesday night session at Te Whara O Te Ata is cancelled tonight due to family commitments. Sorry for the late notice, I only just realised that there was a conflict... Also we have some donated computers now, so classes are open to everyone not only people with laptops. From next week, bring your own laptop or use our computers.. -- Disclaimer: By sending an email to any of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message.

1 0

External 56k modem
by Glenn Morrissey 23 Oct '10

23 Oct '10

Hi all does anyone have an old external 56k serial modem for sale? I have given up trying to make my 56k Lucent internal modem work. Glenn Morrissey.

3 3

Media Statement: Keep up with technology @ Kiwi PyCon 2010
by Tim Knapp 22 Oct '10

22 Oct '10

Hi, Please find below the second Kiwi PyCon Media Statement. Also, please note we've also arranged a $20 bus to/from the event from Auckland - limited to 49 people. So get in quick! More details here: http://nz.pycon.org/2010/oct/22/round-trip-auckland-20-bucks/ Thanks, Tim ------------------------------------------------------------------------- New Zealand Python User Group Incorporated Media Statement For immediate release 19 October 2010 Keep up with technology @ Kiwi PyCon 2010 IT folks will certainly be interested in Kiwi PyCon 2010: An exciting and interesting weekend is going to show how the programming language Python is used in science, education, and high-profile companies here and around the world. It is held at the Copthorne Hotel & Resort in Waitangi, Bay of Islands Saturday 20-Sunday 21 November. Participants will learn first-hand how Weta Digital uses Python in their datacentre, or how they can leverage cloud computing like Amazon web services and Google App Engine. The conference is also an excellent networking opportunity to meet people who have actually delivered, from industry to education to government sectors to Hollywood. The registration fee ($100 regular, $60 student/unwaged) includes morning and afternoon tea, as well as lunch on both days, the Kiwi PyCon 2010 t-shirt, and there are also tons of giveaways this year, ranging from books, laptop bags and geek gadgets to software licenses for Python IDE's and Amazon server credits. An impressive sponsorship lineup includes Catalyst IT and Microsoft as Gold Sponsors; Atlassian, Enthought, the Plone Foundation, the Python Software Foundation, and Tait Radio Communications as Silver Sponsors; and Schwag Sponsors: Amazon Web Services, Wingware, Mozilla, ActiveState, Apress, Packt Publishing, O'Reilly, ThinkGeek, ANZTB, and Bitbucket. To make your booking visit http://nz.pycon.org For assistance with travel and accommodation, email kiwipycon(a)nzpug.org or phone Danny Adair on (09) 9555 101. ---------------Ends--------------------- For media or conference enquiries please contact: Danny Adair, NZPUG President Phone: (09) 9555 101 Email: kiwipycon(a)nzpug.org Website: http://nz.pycon.org

1 0

Media Statement - Kiwi PyCon 2010
by Tim Knapp 22 Oct '10

22 Oct '10

Hello, Please find below the Media Statement for Kiwi PyCon 2010. Kind regards, Tim ---------------------------------------------------------------- New Zealand Python User Group Incorporated Media Statement For immediate release 24 September 2010 Major IT players support Python Conference 2010 Over 150 computer programming enthusiasts are set to meet at the Kiwi PyCon 2010 conference on Saturday 20 and Sunday 21 November at the Copthorne Hotel & Resort Bay of Islands in Waitangi. Python, a programming language used throughout the world, has a massive following and Python conferences are held around the globe. Kiwi PyCon is New Zealand's Python community coming together and will cover the use of Python in the scientific, web, mobile, gaming, and animation fields. The event has garnered notable support, with Catalyst IT and Microsoft as major sponsors and many other well known companies and organisations including the Python Software Foundation, Plone Foundation, Atlassian, Enthought, Tait Radio Communications, Apress, Packt Publishing, O'Reilly, ThinkGeek, Amazon Web Services, Wingware, ANZTB, Mozilla and ActiveState all backing the conference. Organised by the New Zealand Python User Group Inc.(NZPUG), it promises to bring together developers, designers and business people who will listen to industry speakers. US-based Jacob Kaplan-Moss, creator of "Django", a successful and widely used web application framework along with Anthony Baxter, long-time release manager of Python from Melbourne are keynote speakers for the event. Kiwi PyCon 2010 topics will include: • “How Python is influencing neuroscience research" • Microsoft (Australia) showing how they support Python on their "Azure" platform • Amazon web service • Gmail gadgets • "Going Global : Using Best Effort Translation To Create Multilingual Web Apps" • Python and Java • Python in Astronomy Another guest speaker for the conference is Matt Provost, Systems Manager at Weta Digital, five-time Academy award winning visual effects facility located in Wellington. Matt will speak about "Python in the Datacentre", as he manages all Weta Digital servers, storage and networking which occupies five positions on the Top 500 Supercomputer list. Danny Adair, NZPUG's founding president said “Python is used everywhere, and for anyone interested in or using the language, our annual conference is the place to be.” Kiwi PyCon 2010 registrations are now open. To make your booking for the conference or for more information visit http://nz.pycon.org ---------------Ends--------------------- For media or conference enquiries please contact: Danny Adair, NZPUG President Phone: (09) 9555 101 Email: kiwipycon(a)nzpug.org Website: http://nz.pycon.org

1 0

EDAY November 6th - volunteers wanted
by Bruce Kingsbury 21 Oct '10

21 Oct '10

Still looking for volunteers for EDAY on Nov 6th, if anyone wants to come along contact me (offlist) with name, phone and email and I'll add you to the list and then Vanessa will contact you will all the details you need to know. Drop off point will be the same as last year, Habitat for Humanity 29 Bryant Rd More information about eday is at http://www.eday.org.nz/ -- Disclaimer: By sending an email to any of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message.

1 0

NZ Computer Society National Series: Advanced Robotics - The Future of Aged Care Services
by David Hallett 20 Oct '10

20 Oct '10

NZ Computer Society National Series: Advanced Robotics - The Future of Aged Care Services 18 November 2010: 12:00 pm - 1:30 pm Events Room 2 Gallagher Hub Gate 5, Tristam Street Hamilton National Series: Advanced Robotics - The Future of Aged Care Services The statistics around the aging population in New Zealand are worrying whichever way we look at it. Currently over 500,000 people are aged 65+, projected to double by 2028. By 2051, greater than 25% of our population is expected to be over 70. This increase will bring about major logistical issues in how we, as a country, care for our elderly. More people will require support, and already the ratio of nurses and care-givers to elderly clients is low. Can technology help bridge this gap? In this presentation Gillian Reid FNZCS ITCP, Deputy Chair of the Selwyn Foundation, will outline how technologies such as Charlie are innovating aged-care healthcare, how and why Charlie was designed, and the impact early prototypes are making in trials at Selwyn Village in Auckland. Note: Light lunch provided. Free for NZCS members, inexpensive for others. Registration required at the following URL: http://www.nzcs.org.nz/events/waikato_bop/228-Advanced_Robotics Regards, David Hallett, BSc, MNZCS ITCP P.O. Box 15-516 Hamilton, New Zealand Phone: +64-7-210 5520 Mobile: +64-21-802 256

1 0

4 wire modems
by Craig Bates 18 Oct '10

18 Oct '10

Does anybody have some old school 4 wire leased line modems (9k6 vintage) lying in the junk pile that they may want to part with? ======================================================================= This email, including any attachments, is only for the intended addressee. It is subject to copyright, is confidential and may be the subject of legal or other privilege, none of which is waived or lost by reason of this transmission. If the receiver is not the intended addressee, please accept our apologies, notify us by return, delete all copies and perform no other act on the email. Unfortunately, we cannot warrant that the email has not been altered or corrupted during transmission. =======================================================================

1 0

Spontaneous suspend
by Glenn Ramsey 18 Oct '10

18 Oct '10

Hi, I have a laptop running Kubuntu 8.04 and it has begun spontaneously going to sleep a short time after I log in. After resuming everything appears to work fine. If I don't log in then it will sit on the greeter screen without suspending. I suspect there is something in my .kde/ that is doing this. Anyone know what I should be looking for? Cheers Glenn -- Glenn Ramsey<glenn(a)componic.co.nz> 09 9735603 http://www.componic.co.nz

1 0

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 17 Oct '10

17 Oct '10

There's a WLUG meeting tonight: ---------------------------------------------------------------------- StephenHeywood will be giving a presentation on Inkscape. Be there or be <rect width="100" height="100" style="fill:#000000;stroke:#000000;stroke-width:1px" />. http://www.wlug.org.nz/ http://blog.runecolony.com/wp-content/uploads/2009/01/i_iz_serius_admnim_th… October 18th 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4)

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 17 Oct '10

17 Oct '10

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- Labour Weekend, meeting moved to previous week.

1 0

sudo command not found
by Gregory Machin 16 Oct '10

16 Oct '10

Hi Sudo has me boggled ..... I'm trying to configure a group %linuxadmins .. My account is a member of linuxadmins , when I sudo iptables -h I get "sudo: iptables: command not found". If I sudo /sbin/iptables -h it works fine. My config is at follows (standard config) Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig Cmnd_Alias LOCATE = /usr/bin/updatedb Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall Cmnd_Alias DRIVERS = /sbin/modprobe Defaults requiretty Defaults env_reset Defaults env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR \ LS_COLORS MAIL PS1 PS2 QTDIR USERNAME \ LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC \ LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS \ _XKB_CHARSET XAUTHORITY" %linuxadmins ALL=(ALL) ALL I have also tried %linuxadmins ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS with the same results. Thanks Greg -- - TLA - three letter acronym ... - We are loosing the art of communication through progress.. Proverbs 27:17 (New International Version) 17 As iron sharpens iron, so one man sharpens another.

2 3

Re: [wlug] Maverick Upgrade complete... - i have a strange bug
by Liz Quilty 15 Oct '10

15 Oct '10

Let me know if you have had problem playing flash videos at all, I've had a fair few problems with it logging up. I have tried kde, gnome, kdm, gdm, straight X windows without anything, Brand new login with fresh profile etc and still getting the bug. Chrome has its own flash plugin which still has the problem, firefox with standard plugin also has the same bug. basically after about 2 mins it locks up, the active window is still usable (ie a konsole) , and mouse moves but can't click. I can use the keyboard to type but not to navigate alt+tab to other windows etc. I can get to tty1 and back no problems but again not change windows in the window manager. If anyone has got a similar problem, or a fix, let me know. Liz On 15 October 2010 17:14, Sandwalker <sandwalker(a)gmail.com> wrote: > As far as I can tell, the clean install worked flawlessly, and I can still > switch between Windows and Maverick. Now I'm just trying to figure out how > to get my HDD temp applet back into my panel. > > Sandy > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug >

2 4

Upgrading to Maverick...
by Sandwalker 15 Oct '10

15 Oct '10

As far as I can tell, Maverick seems to work just fine. However, I haven't installed it yet. Has anyone here got a dual-boot system with Windows 7? I've read about this bug where grub2's bootloader is overwritten after running Windows, and I don't know if it applies to this distribution as well -- I'm rather wary of upgrading (a clean install in this case, as I'm skipping Lucid) as a result. I would like to upgrade, as it finally fixes the inability of my laptop to mute the internal speakers when headphones are plugged in (that's really the major reason why I want to upgrade; the other one is that Karmic's running rather slowly after a year). Sandy

5 13

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 14 Oct '10

14 Oct '10

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- To be announced... October 18th 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4)

6 8

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 14 Oct '10

14 Oct '10

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- StephenHeywood will be giving a presentation on Inkscape. Be there or be <rect width="100" height="100" style="fill:#000000;stroke:#000000;stroke-width:1px" />. http://www.wlug.org.nz/ http://blog.runecolony.com/wp-content/uploads/2009/01/i_iz_serius_admnim_th… October 18th 7:30pm MS4.G.02 (http://www.waikato.ac.nz/contacts/map?MS4)

1 0

Computer Skills Workshops
by Bruce Kingsbury 13 Oct '10

13 Oct '10

Computer Skills Workshops Wednesdays 6-8pm Te Whara O Te Ata, 60a Sare Cres Bring your own laptop and learn basic computer and internet skills, word processing, spreadsheets, photo editing. Small classes (limit of five). Open to everyone, with a preference for teaching Linux and Free and Open Source applications. Internet access, Free software and Fair Trade Organic coffee are all available. No charge, but Koha to cover costs would be greatly appreciated.

3 3

NZ Computer Society National Series: Mapping ICT to the "Real World" with Process Modelling
by David Hallett 07 Oct '10

07 Oct '10

NZ Computer Society National Series: Mapping ICT to the "Real World" with Process Modelling 26 October 2010: 12:00 pm - 1:30 pm Events Room 1, Gallagher Hub City Campus, Gate 5 Tristram Street, Hamilton NZCS is proud to bring you the next of the National ICT Series, this month focusing on mapping ICT to the "real world" through business process modelling and BPMN 2.0. Mapping ICT to the "Real World" with Process Modelling One of the major strengths of ICT is improving the efficiency and profitability of business, however to be successful it's essential that ICT accurately maps to the way organisations do business. In that context, processes are at the heart of everything we do. No matter what it is. And in all facets of an organisation, some process is always being followed even if that process only exists in the heads of a few key personnel. Business Process Mapping is all about capturing and documenting these processes in a standard manner all stakeholders understand. The correct documentation and execution of these processes is a key factor in building agile organisations and plays a primary role in enabling businesses large and small. This presentation will look at how to document your existing processes in a standards compliant manner that will enable both Business and IT to finally talk the same language while providing key artefacts for process re-engineering projects and allowing for the possible direct execution of those processes in a BPMS. This subject and presentation is essential for ICT professionals and Business Analysts alike who are serious about providing the maximum return to their organisations or clients for their ICT investment. Special thanks to Integration Works Ltd for sponsoring this presentation. Note: Light lunch provided. Free for NZCS members, inexpensive for others. Registration required at the following URL: https://www.nzcs.org.nz/events/waikato_bop/219-Mapping_ICT Regards, David Hallett, BSc, MNZCS ITCP P.O. Box 15-516 Hamilton, New Zealand Phone: +64-7-210 5520 Mobile: +64-21-802 256

1 0

Fwd: eDay 2010 date announced!
by Bruce Kingsbury 06 Oct '10

06 Oct '10

---------- Forwarded message ---------- From: eDay 2010 team <info(a)eday.org.nz> Date: 6 October 2010 16:41 Subject: eDay 2010 date announced! To: Bruce Kingsbury <zcat(a)zcat.geek.nz> If you prefer, you may view this newsletter in your web browser<http://campaigns.campaignsuite.co.nz/t/r/e/fjhyhd/hhhkdiitr/> . *You're receiving this newsletter because you subscribed via our web site or volunteered at our last eDay event.* [image: eday branding]<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/r> [image: null] *eDay newsletter - 6/10/10* [image: null] *All about eDay* eDay is a community initiative designed to raise awareness of the benefits of recycling computers and the hazardous nature of electronic waste (e-waste), while offering an easy way for households and schools to dispose of old computers and mobile phones in an environmentally sound manner. For more information click here.<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/y> *Share this newsletter* Know anyone who might be interested in eDay? Click here<http://eday.forwardtomyfriend.com/r/hhhkdiitr/2A950F69/fjhyhd/l>to share this newsletter. *Subscribe* If you have not signed up to receive eDay updates you can subscribe here<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/j> *eDay 2010 date announced!* The date for eDay 2010 was announced today by the Minister for the Environment, the Hon Nick Smith. eDay will be held throughout New Zealand on Saturday 6 November 2010. Funding has been secured from the Ministry for the Environment’s Waste Minimisation Fund and close to 40 drop-off locations have already been confirmed. We are expecting as many as 50 sites to participate! Updates will be posted on the eDay website www.eday.org.nz<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/t>as venue details are confirmed in each region. We thank the Ministry for their invaluable support. To read the full media release, click here<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/i> . [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> *A community affair* [image: A community affair] This year we are encouraging communities to work together to collect their neighbourhood e-waste. Collecting it in one place and taking one trip to the drop-off locations on Saturday 6 November saves time and reduces vehicle emissions. It’s also a great way to meet your community and make sure everyone can take part in eDay. [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> *Thanks to our national partners* [image: Thanks to our national partners] In addition to funding from the Waste Minimisation Fund, national partners and supporters from previous years have confirmed their support, including KiwiRail, MORE FM, the Blue Star Group, Trade Me and industry partners, The Laptop Company and Invo. A big thanks to all our partners for helping us raise awareness of the importance of recycling computer equipment. [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> *Volunteers needed* [image: Volunteers needed] eDay relies on the help of thousands of hard-working volunteers across the country to make the event a success. We are looking for volunteers to assist at each eDay drop-off site. Volunteers are needed to help direct traffic, interview drivers about their awareness of e-waste issues and unload computer equipment from cars. You can help by volunteering yourself and / or encouraging your friends, family and co-workers to get involved! Simply complete the form here.<http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/d> [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> *Did you know?* [image: Did you know?] According to www.e-takeback.org, 133,000 PCs are discarded in the United States every day! In New Zealand, we estimate that as many as 2000 PCs are being discarded every day. [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> *Who runs eDay?* [image: Who runs eDay?] eDay was created by Computer Access New Zealand (CANZ), an initiative of the 2020 Communications Trust, in 2007 in response to a growing concern about the volume of e-waste being dumped in landfills around the country with a potentially toxic effect on the environment. This year, funding for eDay has been secured by the 2020 Communications Trust. Local eDay events are run by community groups or local authorities. National coordination is provided by the eDay New Zealand (eNZ) Trust, a new independent community trust set up by CANZ members specifically to promote responsible recycling of electronic waste in New Zealand. [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> ** Thanks for your support in signing up to this newsletter. We will send more updates over the coming weeks. We look forward to the most successful eDay yet on Saturday 6 November. *The eDay team* [image: Arrow pointing upwards] Back to top <#12b7fa0e9da59aaf_pagetop> [image: null] eDay <http://campaigns.campaignsuite.co.nz/t/r/l/fjhyhd/hhhkdiitr/h> is a community initiative designed to raise awareness of the hazardous nature of electronic waste. If you no longer wish to receive the eDay email, you may instantly unsubscribe <http://campaigns.campaignsuite.co.nz/t/r/u/fjhyhd/hhhkdiitr/>, but we'll be sorry to see you go. [image: null] © 2010 eDay info(a)eday.org.nz -- Disclaimer: By sending an email to any of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message.

1 0

Remote adminstration
by cmoman 05 Oct '10

05 Oct '10

Hello all, Is there a tool in ubuntu that a user can start that reports the real world ip address and configures a home router to open a port to allow remote administration? I have a friend or two for whom it would nice to get them to start a program, report to me the details via MSN or Skype or telephone etc and allow me to log in and fix or make a configuration change to their machine. I know how to set things up using ssh etc but that relies on some initial configuration at the their end. KDE has a nice VNC invite function but it won't do the router config part. It appears the likes of KTorrent and Azuereus have the ability to do some to the router via UPnP to open ports up on the router dynamically so I am guessing all this is possible. Cheers

6 6

WLUG Fixit Meeting is today!
by Meeting Reminder bot 01 Oct '10

01 Oct '10

A reminder, the WLUG Fixit Meeting is today. ---------------------------------------------------------------------- Saturday October 2nd, 10:00 am to 4:00 pm SaturdayWorkshop at Te Whanau Pūtahi (http://www.wlug.org.nz/TeWhanauPutahi) the community church at the end of Oxford Street. We'll have the usual tables, power, various ISO's, Internet, coffee and light lunch, etc. If there's something you specifically want to work on please mention it on the mailing list in advance so we can study up beforehand or bring any necessary equipment. Also we're paying a little extra for hall and internet now, so a gold coin donation to help cover these costs would be greatly appreciated.

1 0

WLUG Fixit Meeting tomorrow
by Meeting Reminder bot 30 Sep '10

30 Sep '10

A reminder; the WLUG Fixit Meeting is tomorrow. ---------------------------------------------------------------------- Saturday October 2nd, 10:00 am to 4:00 pm SaturdayWorkshop at Te Whanau Pūtahi (http://www.wlug.org.nz/TeWhanauPutahi) the community church at the end of Oxford Street. We'll have the usual tables, power, various ISO's, Internet, coffee and light lunch, etc. If there's something you specifically want to work on please mention it on the mailing list in advance so we can study up beforehand or bring any necessary equipment. Also we're paying a little extra for hall and internet now, so a gold coin donation to help cover these costs would be greatly appreciated.

1 0