- wlug - list.wlug.org.nz

cdrecord with Ubuntu 6.06 won't write cd Can anybody help?
by Ron Dean 05 Jun '06

05 Jun '06

This is the error message I get ron(a)ubuntu:~$ cdrecord -v /home/ron/Desktop/ubuntu-6.06-desktop-i386.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <cdrtools(a)packages.debian.org>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.15-23-386 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 1 = CD-ROM scsidev: '/dev/cdrw' devname: '/dev/cdrw' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? : Operation not permitted Using libscg version 'debian-0.8debian2'. cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-110D' Revision : '1.37' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x002B Profile: 0x001B Profile: 0x001A Profile: 0x0016 Profile: 0x0015 Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 4194304 = 4096 KB Track 01: data 697 MB Total size: 801 MB (79:23.98) = 357299 sectors Lout start: 801 MB (79:25/74) = 357299 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2547 Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? : Operation not permitted Starting to write CD/DVD at speed 40 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 697 MB written.cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 0E 13 00 00 0E 26 09 30 FE 08 01 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0 Sense flags: Blk 236126208 (not valid) resid: 63488 cmd finished after 2.085s timeout 40s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 19.883s Average write speed 654.9x. Fixating... cdrecord: Success. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.006s timeout 480s cmd finished after 0.006s timeout 480s cdrecord: Cannot fixate disk. Fixating time: 2.016s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. ron(a)ubuntu:~$

3 7

Wlug WIKI
by Daniel Lawson 03 Jun '06

03 Jun '06

Just a heads up to anyone who hasn't worked it out: the wiki, and hoiho itself, is currently offline. No update on what is wrong with it as yet.

5 4

Stop - Dapper time!
by Craig Box 02 Jun '06

02 Jun '06

It's here. https://lists.ubuntu.com/archives/ubuntu-announce/2006-June/000083.html There are 9 ISOs in total (three architectures, three types of CD; desktop (live CD), server and 'alternate install', which I believe is the original text mode install CD). I suspect someone might like to arrange a NZ mirror? Craig

3 2

Warren Hughes (IBM) is out of the office.
by Warren Hughes 01 Jun '06

01 Jun '06

I will be out of the office starting 01/06/2006 and will not return until 02/06/2006. Hi, thanks for your email. I am away on sick leave. I will be checking my email occassionally while away. I will now be back at work on Friday. Cheers, Warren.

1 0

Openfiler
by Chris O'Halloran 01 Jun '06

01 Jun '06

Some discussions have come about adding another server to reduce the pressure on our existing server. I don't generally make any of the decisions regarding our computer network but a suggestion was made regarding a program/server/technology called openfiler. Given that I am the known open source advocate around here, the question was asked, what did I know about it and did anyone in the wlug have any experience of using it. I assumed it was a software package but its seems is a customized version of a Ret Hat derivate CentOS. http://www.openfiler.org Having a Linux server on the network would definitely be a foot in the door for Linux based software within our company but it would good if the first experience within the company was positive and straightforward. Any comments or does openfiler provide a nice gui install for setting up a network server that could also be acheived using other modern distro? Cheers Chris

2 2

Picasa on Ubuntu.
by Oliver Jones 01 Jun '06

01 Jun '06

I downloaded Picasa for Ubuntu. It works really well. Props to Google. Now if they just made it Open Source. Regards

3 4

Acceptable use of the WLUG Mailing List
by Meeting Reminder bot 31 May '06

31 May '06

The WLUG Mailing List is the discussion-list extension of the Waikato Linux Users Group (Incorporated). As such, we expect members of this list to adhere to the principles espoused in the official WLUG Charter[1], in particular, Rule 6, which covers the activities on this mailing list. While this is an Acceptable Use Policy, the WLUG Committee do recognise the need for informal discussion among list members, and draconian administration is not the goal here. Please keep in mind, however, that your comments to this list do represent the WLUG, and while it is good to be seen as an organisation with a sense of humour, some comments may do major harm to our credibility as a serious advocate of GNU/Linux and all things Free Software/ Open Source related. List discussion should * be honest * accentuate the positive, without hyperbole or blatant misrepresentation * maintain a reasonable level of spelling and grammar * not indulge in ad hominem attacks * not continue inflammatory or abusive threads * not be unprofessional or petty, especially with respect to the names of other software companies * not promote or denigrate political, cultural, or religious views * not indulge in marketing or advertising, other than on a private sale basis, or advertising of jobs - which may be announced once only * not reproduce copyrighted material without permission from the copyright holder * not defame any person or organisation Posters who consistently violate these guidelines will be dealt with at the discretion of the List Maintainer. If you feel you have been unfairly dealt with, you have recourse to any member of the WLUG Committee[2]. Certain mailing list etiquette should also be maintained: * please use only plain text (not HTML) * reply inline or below when quoting, rather than on top * trim quotes (don't reply quoting a 10 page message with a single line of reply) If you have any questions, start reading at http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html. These points have been established over a long time on this list. If you want to question them, please do it off list. As list users, use your discretion when pulling people up over etiquette - please reply off list, and if there is a serious breach, the list administrator will probably have dealt with it off-list already. [1] http://www.wlug.org.nz/WlugCharter [2] http://www.wlug.org.nz/WlugCommittee

1 0

Warren Hughes (IBM) is out of the office.
by Warren Hughes 31 May '06

31 May '06

I will be out of the office starting 31/05/2006 and will not return until 01/06/2006. Hi, thanks for your email. I am away on sick leave. I will be checking my email occassionally while away. I hope to be back at work tomorrow (Thursday). Cheers, Warren.

1 0

Re: [wlug] Graphics SiS
by jaytee＠clear.net.nz 28 May '06

28 May '06

Hmmn! Negative outcome, not good. *waits for Dapper* John > > Sounds like you are out of luck :-( > > -- > Ian McDonald > Web: http://wand.net.nz/~iam4 > Blog: http://imcdnzl.blogspot.com > WAND Network Research Group > Department of Computer Science > University of Waikato > New Zealand > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

3 2

what does a good e-mail client need ?
by Gavin Denby 27 May '06

27 May '06

I was reading the cnet article on the need for a mail client to push forward DESKTOP LINUX *E-mail will be the most significant factor governing the uptake of Linux on the desktop, according to a new study. * The Desktop Linux Client Survey 2005, released this week by the Open Source Development Labs, found that the lack of a powerful e-mail application could hinder the adoption of Linux on the desktop. Full story here: http://news.com.com/E-mail+crucial+to+future+of+desktop+Linux/2100-7344_3-5… What I wondered was what does an enterprise e-mail client do that's different from my thunderbird. Is it just the calender? is it notes. I have tried, and hated outlook, probably as I use just e-mail and dont like the complexity of all the other things, but what would happen in an enterprise situation. If you understand this article, can you explain what the novell and mozilla offerings will mean, and will this be the outlook killer. What does outlook do that so vital? Is this another case of its not the same, or are we really missing out on something? any enterprise experince that can help a tech like me understand this ? Is there a really good app for this, could something be done to solve this. After all e-mail is the number 1 app for the net, search is 2 and then web surfing. 2 and 3 are fine, are we missing the boat on 1? I thinks its sufficiently linux related. do we have the Guru's in the lug that could solve this?

10 15

Google Picasa (picture organiser) now available for Linux
by Ian McDonald 26 May '06

26 May '06

http://googleblog.blogspot.com/2006/05/picture-this-picasa-for-linux.html -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

2 1

Graphics SiS
by Ron Dean 26 May '06

26 May '06

http://www.winischhofer.at/linuxsisvga.shtml I found this site that may help but I still haven't got 3D

2 1

Re: [wlug] Graphics
by jaytee＠clear.net.nz 26 May '06

26 May '06

This is the output from my lspci also. I too am keen to see a resolve for this. Regards John ----- Original Message Follows ----- > This is the output lspci 0000:01:00.0 VGA compatible > controller: Silicon Integrated Systems [SiS] 661/741 > /760/761 PCI/AGP VGA Display Adapter > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

1 0

Graphics
by Ron Dean 25 May '06

25 May '06

This is the output lspci 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741 /760/761 PCI/AGP VGA Display Adapter

1 0

Making 3D drivers work
by Ron Dean 25 May '06

25 May '06

On the cd that came with my motherboard with on board graphics is a linux driver sisdrv_430_20040604.o which I have no idea how to install the mother board is an A7S8X-MX . It already works with 2D graphics . I am running Ubuntu 6.06 LTS - the Dapper Drake

1 0

A bash question
by Leslie Katz 25 May '06

25 May '06

Hi again Aristotle. All is, I believe, now resolved. Your latest script didn't work as you'd intended. Each time xmms finished its chore, it sat there without closing. As there were two wma test files to be converted, that meant that xmms had to be closed twice manually before the script finished. (When, however, the script was helped in that way, it ultimately produced two perfect mp3 test files.) I don't know that I'm expressing this properly, but what I had found by trial and error with my script was that the "xmmsctrl quit" command didn't seem to do anything unless there'd been an antecedent "xmmsctrl launch" command; it wasn't enough merely to have earlier started xmms by typing its own name, followed by a reference to a file to be played. When I added to your latest script, immediately before the line "xmms "$src"", the line "xmmsctrl launch", then the script ran from beginning to end without interruption, with xmms opening and closing at the appropriate points. At the same time, by running and rerunning the script and checking the results, I found that the script didn't do its job properly if, when it ran, there was already in the .xmms directory a file called xmms.m3u, which, as I understand it, is a playlist file. I therefore added to the line "xmmsctrl launch" the word "clear" and that put an end to that problem, although if with any potential adverse consequences, I'm not now aware. You asked me whether I had MPlayer. The answer's no. I'm doing all this on an ancient laptop running DSL. I tried to get MPlayer to run on it, but it wouldn't for some reason I can't now remember. In any event, even if it would, it'd be very cramped, given the ancient laptop's specifications. You also raised the issue of changing the script so that it would convert other audio file formats as well. I believe I understand how that could be done, but the circumstances in which I'm struggling with all this are peculiar. I gave the laptop to the son of friends and he's the one who asks me for things he wants to be able to do. I then try to work out (or, to be more accurate, try to get others to work out!) how to do them. The only kind of file he says he wants to convert to mp3 is wma, so, at least for now, the script can be used as it is. My warmest thanks for all the help you've given me with this. Best wishes, Leslie

1 0

slmodem problem
by Xiao Wong 24 May '06

24 May '06

Hi I'm currently having a problem with connecting to my ISP. I'm not sure if it's a setup problem or a protocal problem--I thought I had set up my modem and driver, but when it connects from the terminal (just after it's sending my password), this type of message comes up: --> Don't know what to do! Starting pppd and hoping for the best. --> Starting pppd at Mon May 15 18:19:03 2006 --> pid of pppd: 4635 --> Using interface ppp0 --> Disconnecting at Mon May 15 18:19:34 2006 --> The PPP daemon has died: PPP negotiation failed (exit code = 10) --> man pppd explains pppd error codes in more detail. --> I guess that's it for now, exiting --> The PPP daemon has died. (exit code = 10) Any help for this new Linux user would be appreciated, Xiao _________________________________________________________________ Need a new job? Check out XtraMSN Careers http://xtramsn.co.nz/careers

3 4

A bash question
by Leslie Katz 24 May '06

24 May '06

Hi Aristotle. It was very generous of you to take so much time over "my" script, which, as I mentioned earlier, was almost entirely a mere cobbling together by me of bits and pieces which I'd taken from others. Given that you'd created an alternative script, I took the liberty of trying it out. Having saved it and made it executable by all, I then tried to run it in a terminal window. The directory in which I was when I did so contained two .wma files, Beethoven1.wma, which was a re-named file I'd copied over from my Windows computer, and Beethoven2.wma, which was just a copy of Beethoven1.wma, created so that I could test what happened when I tried to convert multiple files from wma to mp3. This is what happened. I got the following output: "Beethoven1.wma => Beethoven1.wma.wav Could not find "Beethoven1.wma.wav". Beethoven2.wma => Beethoven2.wma.wav" and then the graphical representation of the xmms player appeared on the screen, without any activity being apparent. After some time when nothing had happened, I tried to close that representation, but its close box wouldn't respond. I then closed the terminal window, upon which the xmms window closed too. I then opened xmms and checked the output plugin situation. I found that the output plugin was Disk Writer, which I'd expected, since the script hadn't had the chance to restore the OSS plugin. If what I've reported above suggests to you some tiny glitch in your script and you don't feel that you've spent too much time on it already, I'd be grateful to hear what amendment should be made to it. Best wishes, Leslie

3 6

A bash question
by Leslie Katz 23 May '06

23 May '06

Thank you to all those who took the trouble to reply to my post. Further consideration convinced me that I needed an application additional to xmms to do what I ultimately wanted to do. (What I ultimately wanted to do was to be able to convert files in .wma format to .mp3 format.) That additional application was xmmsctrl and it worked to close xmms. The script I was working on is now in the following form and does do the necessary conversion: #### #!/bin/bash sed -i "s/libOSS.so/libdisk_writer.so/g" ~/.xmms/config for i in *.wma do filename=`basename "$i" .wma` echo "Converting $i to .wav" xmmsctrl launch xmms "$i" while `xmmsctrl playing`; do sleep 1 done xmmsctrl quit lame "${i/wma/wav}" "${i/wma/mp3}" && rm -f ${i/wma/wav} done sed -i "s/libdisk_writer.so/libOSS.so/g" ~/.xmms/config #### Everything of any worth in the script has been derived from others, but I'm sure that the way in which I've put those things together breaks most, if not all, the rules about correct script writing. At least the script works (for now!). Thanks again, Leslie

2 1

Hello, and help needed
by Sidd 23 May '06

23 May '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, To introduce myself; I am new to this list and am just trying to get a handle on Linux. I have lived in Hamilton for 6 years, and currently live in Tamahere. I am an IT professional who has always worked with windows, so this is somewhat of a challenge, and I need to make fairly quick progress. Is there anyone here who would be willing to get together with me and give me a bit of a quick start. I have an old server I am trying to set up with Linux, but I am experiencing hardware issues that are beyond me. I would be willing to pay someone for his/her time if necessary. Cheers, Sidd. -----BEGIN PGP SIGNATURE----- Comment: GnuPG v1.4.0 iD8DBQFEcp/DvSQLmqPuBSMRAtV3AKDup8okTlaItxyzf0gOxZdZGSlLvACg+BaO ZLNCWj101NQCQmxHiolcD5Q= =Umbk -----END PGP SIGNATURE-----

4 9

A bash question
by Leslie Katz 22 May '06

22 May '06

I have an icon for xmms on my desktop. I click on the icon; xmms opens in its own little window. I open a terminal. I type in it kill -9 $(pidof xmms) and press Enter. The xmms window closes. I have a bash script. A line in it runs xmms, at which point xmms's little window opens and converts a .wma file to a .wav file. The next line in the script says kill -9 $(pidof xmms), but it doesn't work to close the xmms window. That window stays open until I click on the close box in the top right of the window. Why doesn't the kill command work in the second case when it works in the first?

5 6

Re: [wlug] Broadcom wlan + Ubuntu
by jaytee＠clear.net.nz 22 May '06

22 May '06

DSE did not tell me that it would work they said that it should, if not right now then at a future time when the firmware became available. You probably can still get the wireless to work by using a card (maybe dse would help you with that, saves them getting a whole computer back) until the new version is on stream. Another alternative might be to take your machine to the meeting there are tons of lan experts to give you help.. > > I should have done some homework before I signed the > dotted line, although I am going to use the 14 day return > to get this steamer back to where it belongs. Im not so > pissed at the laptop not being up to scratch, its more > that I was told it *would* fit the criteria I set out. Up > till now I had thought DSE were better than this. >

5 7

Re: [wlug] Broadcom wlan + Ubuntu
by jaytee＠clear.net.nz 22 May '06

22 May '06

Shane Take your machine to the workshop if you cannot get it fixed after the meeting. There are some dodges for the broadcom wlan I am just not clever enough to sort it yet. Let me know what happens Regards John ----- Original Message Follows ----- > > I should have done some homework before I signed the > dotted line, although I am going to use the 14 day return > to get this steamer back to where it belongs. Im not so > pissed at the laptop not being up to scratch, its more > that I was told it *would* fit the criteria I set out. Up > till now I had thought DSE were better than this. > > Shane > > ps. oops sent that direct instead of to the list, grr I > want my kmail back! > > > On Sun, 2006-05-21 at 13:36 +1200, jaytee(a)clear.net.nz > > > wrote: I had a similar drama with my laptop and > > > broadcom wlan. After trying a howto off the web and > > > seeking advice on this list I have elected to wait for > > > the final of dapper drake to come on stream before > > > attempting to get my wlan going. Not much help I guess > > > but that is all I have. If it helps you can research > > > the thread "AMD64 wifi" to see where I got to. Regards > > > John > > > > > > > > > > > > > > > ----- Original Message Follows ----- > > > > Ive just bought a new laptop. I specifically asked > > > > the guy at Dick Smith for one that had no hardware > > > > issues re: Linux, I asked him 3 times about the > > > > wireless (thats what I really wanted) and he said > > > > not a prob So as you can guess I spent the better > > > > part of last night and today trying to get wireless > > > > working on my ubuntu Its an Asus laptop with a > > > > broadcom wireless, I have been bashing my head > > > > against the desk following tutorials on ndiswrapper > > > > to no avail. Before I lose my rag with the guy at > Tricky Dickys, has anyone succeeded with said chipset? > > > > Have I borked something? > > > > > > > > > > > > Also, I installed kubuntu-desktop and kde does *not* > > > > like the lcd for some reason, if I launch an app all > > > > is fine, until I move or close the window. Then I > > > > am left with a screen of .... for want of a better > > > > word.. crap. I have a screenshot at > > > > http://shanes.dyndns.org/screenshot1.png > > > > > > > > One final thing.. I cant get dvd's to play, I have > > > > mpegs playing fine, the dvd is mounted ok, and the > > > > files are readable just nothing will play them, not > > > > totem, not mplayer. Windows is having no troubles. > > > > So its not a hardware issue. > > > > > > > > </gripe> > > > > Any help appreciated > > > > > > > > Shane > > > > > > > > _______________________________________________ > > > > wlug mailing list | wlug(a)list.waikato.ac.nz > > > > Unsubscribe: > > > > http://list.waikato.ac.nz/mailman/listinfo/wlug > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

3 2

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 21 May '06

21 May '06

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- A speaker has been tentatively booked... More details coming...

4 3

REMINDER: WLUG meeting tonight!
by Meeting Reminder Bot 21 May '06

21 May '06

There's a WLUG meeting tonight: ---------------------------------------------------------------------- Our guest for April is Buddika Aluwihare from http://www.wlug.org.nz/HP who will be speaking on HP Reference Linux Architecture. HP Reference Linux Architecture appears to be about standardising middleware stacks and providing support for that also so that HP can provide support for the hardware, Linux and the middleware. Location is TW.2.07 (http://www.wlug.org.nz/TW) at the University of Waikato. Meeting will start at 7:30pm.

1 0