- wlug - list.wlug.org.nz

Fedora Reloaded Podcast.
by Michael 23 Jan '06

23 Jan '06

Fedora Reloaded 4 is out, its not bad. An interview with Chris Blizzard (talks on mono inclusion in FC), Konstantin Ryabitsev from the Fedora Extras project and Greg de K. on Fedora foundation and Fedora ambassadors. The ogg is only 18.1MB is a good listen. Its certainly worth grabbing if your in the slightest bit interested in some of the going ons and on goings of Fedora. http://www.fedorareloaded.com/ http://www.fedorareloaded.com/podcasts/Fedora_Reloaded_4.ogg Michael

1 0

WLUG Meeting is tonight
by Meeting Reminder bot 22 Jan '06

22 Jan '06

The WLUG meeting is this evening ---------------------------------------------------------------------- There will be no meeting for the following reasons.... * There will be a number of people heading off to linux.conf.au (http://lca2006.linux.org.au/) next week. * We are currently renegotiating our regular venue, LITB is no longer suitable as what was one big room is now two small rooms.

1 0

WLUG Meeting is on Monday
by Meeting Reminder bot 19 Jan '06

19 Jan '06

The WLUG meeting is on Monday ---------------------------------------------------------------------- There will be no meeting for the following reasons.... * There will be a number of people heading off to linux.conf.au (http://lca2006.linux.org.au/) next week. * We are currently renegotiating our regular venue, LITB is no longer suitable as what was one big room is now two small rooms.

1 0

adding a link to WLUG
by Michael 18 Jan '06

18 Jan '06

Would there be any objection to me adding WLUG to the Fedora projects LUG link page? http://fedoraproject.org/wiki/LinuxUserGroups <http://fedoraproject.org/wiki/LinuxUserGroups> Thanks Michael

2 2

Gnome Applet question
by Leslie Katz 18 Jan '06

18 Jan '06

I'm using Gnome v 2.8.2. Among the Gnome applets available to be added to my top or bottom panel is one called "Stock Ticker". I'd like to use that applet, but I'd only like to have it open while the stock exchange is open. At other times I'd like to have it closed. I added the applet to one of my panels and then configured it as I liked. I then removed it and re-added it (without having shut my computer down in the interim). On re-adding the applet, I discovered that all of the preferences I'd earlier set for it had disappeared. If, on the other hand, I shut down my computer without having removed the applet and then restarted it, the applet re-appeared with all of my preferences intact. I read a lot of material about Gconf, its GUI editor and gconftool-2. By playing around with those things, I discovered the following: the Stock Ticker applet gets assigned a number when added to the panel, say, applet_3. If I remove the applet and then re-add it, it comes back as applet_4. That's the reason, no doubt, why my preferences disappear when I close the applet--they were attached to applet_3 only. Applet_4's preferences are the default ones for whenever the Stock Ticker's first opened. I need a way to change the default preferences for the Stock Ticker so that, whenever it's opened, it opens with my preferences, not the built-in ones, but finding it's beyond me. Does anyone have any suggestions as to how I can change the Stock Ticker's default preferences permanently, so that, each time it's opened, it opens with my preferences?

1 0

No January meeting next week.
by Lindsay Druett 16 Jan '06

16 Jan '06

Hi All, There will be no meeting next week for the following reasons.... * There will be a number of people heading off to linux.conf.au (http://lca2006.linux.org.au/) next week. * We are currently renegotiating our regular venue, LITB is no longer suitable as what was one big room is now two small rooms. We have a speaker confirmed for February's meeting, who is Peter Bryant, from Rimu Hosting. We also have a speaker tentatively booked for May's meeting. Regards, Lindsay Druett.

1 0

WLUG meeting is one week away
by Meeting Reminder bot 15 Jan '06

15 Jan '06

The Waikato Linux Users Group have a meeting in one week today. ---------------------------------------------------------------------- A WLUG meeting is bookd for this date. No topic has been announced.

1 0

OSS Software for SOHO?
by Greig McGill 10 Jan '06

10 Jan '06

Hi all, A friend is considering starting her own small business, and has asked me what the state of F/OSS packages for small businesses in NZ? She is specifically looking for (in order of priority): * Meeting the requirements of her accountant (any accountants on the list? What requirements are there? I don't know! :) * As complete and featureful as possible. * Runs on Windows. This last one is really not a problem, as I have told her there will be no problem obtaining a Linux or *BSD workstation specifically to run her business applications, and she likes the idea of the separation, as her kids and partner are fiddlers! :) Anyone done this? Olly? I vaguely remember you were playing with MYOB alternatives? I'd be very interested in hearing from any accountants lurking on this list also as to how hard it makes your job if your clients aren't running something "standard" like MYOB? Regards, Greig McGill

3 5

Re: [wlug] BBQ roundup
by David Nicholls 09 Jan '06

09 Jan '06

I was just thinking... Perhaps if we hold this a little further out from christmas, more general members might be able to make it. I managed to miss it every time now doe to family commitments :( and I've been really wanting to get to one of these for some time. Cheers... david > -----Original Message----- > From: Craig Box [mailto:craig(a)dubculture.co.nz] > Sent: Tuesday, 20 December 2005 9:30 p.m. > To: Waikato Linux Users Group > Subject: [wlug] BBQ roundup > > (http://www.wlug.org.nz/MeetingTopics.2005-12-18) > > End-of-year Summer BBQ > > As traditional, held at Perry's and Jamie's place. Thanks for > having us, and especially to Jamie for being co-opted back > onto the committee for the day. We didn't quite get perfect > weather, but there was still much cricket played. > > Turnout wasn't hugely inspiring; there were a good number of > committee and hangers-on, but the number of "general WLUG > members" wasn't that great. After the effort that was put in > to try and appeal to the greater membership, it was > disappointing and we will re-evaluate the event next year. > > Photos: http://www.pointless.co.nz/gallery/wlug-bbq-05 > > Craig > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: http://list.waikato.ac.nz/mailman/listinfo/wlug > >

4 4

OSS software for SOHO
by Leslie Katz 08 Jan '06

08 Jan '06

For Linux, there's Gnucash. I use it for my personal affairs, but many use it for business. The mailing list is very impressive, with many serious contributors.

1 0

Exim for Beginners
by Ivan Potgieter 08 Jan '06

08 Jan '06

Thanks to Michael and David for the links. Unfortunately the ConfiguringExim page <http://www.exim.org/eximwiki/ConfiguringExim?action=fullsearch&value=linkto…>on the <http://www.exim.org/eximwiki/ConfiguringExim?action=fullsearch&value=linkto…> EximWike site is quite sparse (empty actually) <sigh>. I might add some links or content on out wiki once I'm done. Thanks again.

1 0

Exim for Beginners
by Ivan Potgieter 04 Jan '06

04 Jan '06

Hi all, I have decided to attempt setting up a mailserver using exim, but I am having some difficulty finding how-to type documentation. I keep finding FAQs and the like. Does anyone have any suggestions? Many thanks, Ivan BTW: Happy New Year

3 2

Bit-torrent for Apt
by Ian McDonald 03 Jan '06

03 Jan '06

This is an idea I had been thinking about for a while but never got around to actually doing anything about. Haven't tested myself (or even finished reading about it!!) but I think this is kind of cool. http://sianka.free.fr/documentation.html -- Ian McDonald http://wand.net.nz/~iam4 WAND Network Research Group University of Waikato New Zealand

1 0

Getting user to choose whether to exit bash script
by Leslie Katz 03 Jan '06

03 Jan '06

Many thanks to both Matt and Warren for your assistance on the above subject. I hope I'll understand what you've told me well enough so that I won't have to bother you again about it. Thanks again, Leslie

1 0

Getting user to choose whether to exit bash script
by Leslie Katz 02 Jan '06

02 Jan '06

I've created a number of bash scripts which make it easier for me to run particular security applications, among them rkhunter. I run the scripts in gnome-terminal. It's crucial to say at the outset that I've had no tuition in bash script writing, so I'm sure my scripts won't win any beauty contest. In any event, I was happy with my script for running rkhunter, except for one thing. I had great difficulty reading part of the output of the script, because that output (from rkhunter itself) was in yellow on a white background. I then figured out how to write a script that opened a second window in gnome-terminal. That second window had a black background, in which my original script for running rkhunter then ran. Legibility of the yellow and all other output in the second window is fine. However, there's a problem. When my script for running rkhunter in the second window finishes, it automatically exits, leaving me back at the first window, so that I haven't got a chance to examine the rkhunter output except as it scrolls by rapidly in the second window. I therefore want to amend my script for running rkhunter so that it doesn't end until the user says so. In a number of places on the Web appears the following script, which I thought I could borrow: #!/bin/bash # Shows how to read a line from stdin echo "Would you like to exit this script now?" read answer if [ "$answer" = y ] then echo "Exiting..." exit 0 fi I tried that script. There's a tiny problem with it. It exits no matter what answer the user gives! The only difference between giving a "y" answer and any other answer is that the word "Exiting" doesn't appear if one doesn't give a "y" answer. How should I amend my script to keep the output on the screen until the user enters some appropriate input?

3 2

Fonts on Ubuntu.
by Oliver Jones 02 Jan '06

02 Jan '06

Hi Folks. I've switched to Ubuntu Breezy from FC4 on my laptop. Everything is going swimmingly. However one thing is odd. Fonts. The fonts in Ubuntu on webpages and apps don't appear quite the same as on FC4. I've installed the MS TT Core fonts package so I have Arial, Tahoma et al installed. But things still look different. Things look clearer in some apps (I think this is the freetype2 hinting setting at work) which is nice but other apps are ugly. Particularly GTK+ v1 apps are all jaggy. Also some websites don't look the same as I'm used to. Like as if the Arial fonts arn't being used.... Anyway, sage advice on fonts in Ubuntu would be apreciated. Regards, PS: Happy New Year

2 2

mythtv question
by Jonathan Purvis 02 Jan '06

02 Jan '06

I've installed MythTV (0.18.1-5) under Ubuntu 5.10. Under the Video Source setup option in mythtv-set, the XMLTV listings grabber has no option for New Zealand. There doesn't seem to be any way of changing what's in the list, other than recompiling from source. Is there any way of configuring MythTV without using the gui or other option for specifying where to get the NZ TV listings? I don't seem to be able to procede without it. Regards, Jon

3 2

Acceptable use of the WLUG Mailing List
by Meeting Reminder bot 31 Dec '05

31 Dec '05

The WLUG Mailing List is the discussion-list extension of the Waikato Linux Users Group (Incorporated). As such, we expect members of this list to adhere to the principles espoused in the official WLUG Charter[1], in particular, Rule 6, which covers the activities on this mailing list. While this is an Acceptable Use Policy, the WLUG Committee do recognise the need for informal discussion among list members, and draconian administration is not the goal here. Please keep in mind, however, that your comments to this list do represent the WLUG, and while it is good to be seen as an organisation with a sense of humour, some comments may do major harm to our credibility as a serious advocate of GNU/Linux and all things Free Software/ Open Source related. List discussion should * be honest * accentuate the positive, without hyperbole or blatant misrepresentation * maintain a reasonable level of spelling and grammar * not indulge in ad hominem attacks * not continue inflammatory or abusive threads * not be unprofessional or petty, especially with respect to the names of other software companies * not promote or denigrate political, cultural, or religious views * not indulge in marketing or advertising, other than on a private sale basis, or advertising of jobs - which may be announced once only * not reproduce copyrighted material without permission from the copyright holder * not defame any person or organisation Posters who consistently violate these guidelines will be dealt with at the discretion of the List Maintainer. If you feel you have been unfairly dealt with, you have recourse to any member of the WLUG Committee[2]. Certain mailing list etiquette should also be maintained: * please use only plain text (not HTML) * reply inline or below when quoting, rather than on top * trim quotes (don't reply quoting a 10 page message with a single line of reply) If you have any questions, start reading at http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html. These points have been established over a long time on this list. If you want to question them, please do it off list. As list users, use your discretion when pulling people up over etiquette - please reply off list, and if there is a serious breach, the list administrator will probably have dealt with it off-list already. [1] http://www.wlug.org.nz/WlugCharter [2] http://www.wlug.org.nz/WlugCommittee

1 0

Superfluous files?
by Leslie Katz 31 Dec '05

31 Dec '05

A. Pagaltzis wrote: >Not likely. But if in doubt, keep copies. Tar up the directories >and keep the tarballs somewhere. If deleting them has bad >effects, just untar them into place again. (Make sure to pass >`-p` when extracting so the permissions, ownership etc get >restored fully.) > > Thanks for the reply. I've done as you said. I was just afraid that perhaps some plugin used by the current version was still in the files for the older versions, but so far, so good. Thanks again, Leslie

1 0

Superfluous files?
by Leslie Katz 29 Dec '05

29 Dec '05

I first used chkrootkit recently. It categorised certain files of mine as suspicious. I understand that it did so because those files were hidden ones, but were not in my home directory. Many of the files chkrootkit called suspicious were connected with earlier kernels that I hadn't uninstalled, so I uninstalled those kernels. That reduced chkrootkit's list of suspicious files significantly. One of the files still on the list was associated with Firefox v 1.0.4. (I use Firefox 1.0.7.) On investigation, I found that in /usr/lib I had three directories, each connected with a version of Firefox earlier than the current one. Is there any risk involved in deleting the three directories?

2 1

IBMer shows how to run Linux as a Windows screensaver
by Martin, Anthony (NZ) 22 Dec '05

22 Dec '05

This is from an internal company newsgroup, it shows how to run Linux as a Windows screensaver http://www-128.ibm.com/developerworks/linux/library/l-scrnsave/ This will definitely be one of my new year projects! Anthony Martin

1 0

linux.conf.au 2006: Just over a month to go!
by Mike Beattie 22 Dec '05

22 Dec '05

2006 - Dunedin, NZ! linux.conf.au is the annual Australian Linux technical conference, and is one of the largest gatherings of users and developers of Free and Open Source Software in the Southern Hemisphere. It is an opportunity for developers and groups to present their ideas amongst peers, and for the Free Software and Open Source communities to gather in general. Summary: There's just over a month to go until linux.conf.au 2006 begins! The 2006 conference is being held in Dunedin, New Zealand, at The University of Otago[1]. More information can be found on the conference website: http://lca2006.linux.org.au/ A "heads up" from the linux.conf.au 2006 Organising team. With just over a month to go before the start of linux.conf.au 2006, we feel it's time to let those that have not heard, hear, and give those that have a reminder that time to register is running short. linux.conf.au 2006 will be held at the University of Otago in the remarkable city of Dunedin, New Zealand from the 23rd - 28th of January 2006. With just over 200 seats left, that are filling fast, you'll need to decide soon if you're going to join us for the best LCA yet! If you're worried about accommodation, We still have over 200 beds available at University College, the student residential hall we've organised for the duration of the conference. As usual, the first two days of the conference are occupied by Miniconfs - This year we have a great selection: * Debian Miniconf * Education Miniconf * Embedded Miniconf * Gnome.conf.au Miniconf * Linux Digital Arts Miniconf * Openoffice.org Miniconf * Open Source Developers Workshop * SysAdmin Miniconf Along with the above Miniconfs[1], we have an excellent program[2] full of the worlds best and brightest speakers[3] covering a diverse range of subjects that we're sure will have something to offer anyone with Linux in their blood. So don't miss out, head on over to http://lca2006.linux.org.au/ and get yourself registered[4] for what is promising to be the biggest and most memorable linux.conf.au yet! Please feel free to forward this announcement to your local LUG, or any other person or group that you feel would be interested! [0]: http://www.otago.ac.nz/ [1]: http://lca2006.linux.org.au/miniconfs.php [2]: http://lca2006.linux.org.au/program.php [3]: http://lca2006.linux.org.au/speakers.php [4]: http://lca2006.linux.org.au/register/ Regards, Mike Beattie, linux.conf.au 2006 Organisers

1 0

Video Conferencing with Santa in children's hospital
by Lindsay Druett 22 Dec '05

22 Dec '05

Hi All, I pulled these clips off Cisco's website.... Definfinitely worth viewing... http://www.lindsay.wired.net.nz/images/santa_122205_350.rm http://www.lindsay.wired.net.nz/images/santa_122205_350.wmv

1 0

X won't boot in user
by Ron Dean 20 Dec '05

20 Dec '05

.xsessions-errors /etc/gdm/PreSession/Default: Registering your session with wtmp and utmp /etc/gdm/PreSession/Default: running: /usr/bin/X11/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/var/lib/gdm/:0.Xservers" -h "" -l ":0" "ron" /etc/gdm/Xsession: Beginning session setup... _IceTransTransNoListen: unable to find transport: tcp _IceTransmkdir: ERROR: euid != 0,directory /dev/X will not be created. _IceTransmkdir: ERROR: Cannot create /dev/X _IceTransPTSOpenServer: mkdir(/dev/X) failed, errno = 13 _IceTransOpen: transport open failed for pts/ubuntu: _IceTransMakeAllCOTSServerListeners: failed to open listener for pts _IceTransISCOpenServer: Protocol is not supported by a ISC connection _IceTransOpen: transport open failed for isc/ubuntu: _IceTransMakeAllCOTSServerListeners: failed to open listener for isc _IceTransSCOOpenServer: Protocol is not supported by a SCO connection _IceTransOpen: transport open failed for sco/ubuntu: _IceTransMakeAllCOTSServerListeners: failed to open listener for sco ** (gnome-session:7837): WARNING **: Unable to read ICE authority file: /home/ron/.ICEauthority Despite looking for the .ICEauthority file I can't find it even amongst the hidden files I'm running Ubuntu Breezy and Ubuntu kernel 2.6.12-10-386 recently installed

2 1

BBQ roundup
by Craig Box 20 Dec '05

20 Dec '05

(http://www.wlug.org.nz/MeetingTopics.2005-12-18) End-of-year Summer BBQ As traditional, held at Perry's and Jamie's place. Thanks for having us, and especially to Jamie for being co-opted back onto the committee for the day. We didn't quite get perfect weather, but there was still much cricket played. Turnout wasn't hugely inspiring; there were a good number of committee and hangers-on, but the number of "general WLUG members" wasn't that great. After the effort that was put in to try and appeal to the greater membership, it was disappointing and we will re-evaluate the event next year. Photos: http://www.pointless.co.nz/gallery/wlug-bbq-05 Craig

1 0

WLUG Meeting is tonight
by Meeting Reminder bot 17 Dec '05

17 Dec '05

The WLUG meeting is this evening ---------------------------------------------------------------------- !!!Annual WLUG Xmas http://www.wlug.org.nz/BBQ Sunday 18 December Time: starting around 2pm. The venue is the same as last time - Perry and Jamie's, 3 Liston Crescent (http://www.zoomin.co.nz/hamilton/hamilton/liston+crescent/3/) Due to the closeness to Christmas there will be no postponement if it's wet. Please check this page and/or the mailing list before coming if you're in any way concerned about the weather. Please bring yourselves, partners, meat, alcohol, topics of conversation, and a passing interest in backyard cricket. WLUG will provide salad, bread and soft drinks as usual. You don't have to be a member to come to the barbeque, but if you aren't, it would be a really nice gesture to bring your $20 and sign up, wouldn't it? ----

2 1

Re: [wlug] breezy repositories
by jaytee＠clear.net.nz 17 Dec '05

17 Dec '05

Thanks Jon. However two little problems, 1. The server keeps dumping me every 700 kbs. 2. I had to say yes to downloading the unauthorised version. Are these things going to be a problem? Regards John ps. Found lincity in universal after using correct spelling ----- Original Message Follows ----- > jaytee(a)clear.net.nz said: > > I am looking for a couple of repo's for ubuntu breezy. > > Reading Google has not helped as it seems some > > repositories are not suited to breezy or ubuntu. > > Is there a link to our wiki or somewhere that will give > > me a list of repositories > > I am looking for Wine Lincity and OpenCity for > > starters Regards John > > I use this for in my sources.list for wine: > deb http://wine.sourceforge.net/apt/ testing/ > > http://www.winehq.org/site/download-deb has full > instructions. > > > Regards, > > Jon > >

1 0

breezy repositories
by jaytee＠clear.net.nz 17 Dec '05

17 Dec '05

I am looking for a couple of repo's for ubuntu breezy. Reading Google has not helped as it seems some repositories are not suited to breezy or ubuntu. Is there a link to our wiki or somewhere that will give me a list of repositories I am looking for Wine Lincity and OpenCity for starters Regards John

2 1

WLUG Meeting is on Sunday
by Meeting Reminder bot 15 Dec '05

15 Dec '05

The WLUG meeting is on Sunday ---------------------------------------------------------------------- !!!Annual WLUG Xmas http://www.wlug.org.nz/BBQ Sunday 18 December Time: starting around 2pm. The venue is the same as last time - Perry and Jamie's, 3 Liston Crescent (http://www.zoomin.co.nz/hamilton/hamilton/liston+crescent/3/) Due to the closeness to Christmas there will be no postponement if it's wet. Please check this page and/or the mailing list before coming if you're in any way concerned about the weather. Please bring yourselves, partners, meat, alcohol, topics of conversation, and a passing interest in backyard cricket. WLUG will provide salad, bread and soft drinks as usual. You don't have to be a member to come to the barbeque, but if you aren't, it would be a really nice gesture to bring your $20 and sign up, wouldn't it? ----

1 0

Different answers when trying to learn file numbers
by Leslie Katz 15 Dec '05

15 Dec '05

Thanks to Perry and to Aristotle (again) for taking the trouble to reply to my query. I'll now experiment as well with the further suggestions made and see what happens.

1 0

recent library book acquisitions
by John R. McPherson 15 Dec '05

15 Dec '05

Hi, O'Reilly has recently donated several books to WLUG. These are for review purposes, so if you'd like to be the first person to borrow one of these (and write a short review of the book for the website) then please arrange pick-up with Craig (secretary @ wlug.org.nz): Asterisk: The Future of Telephony (http://library.wlug.org.nz/show.pl?id=48) Linux Desktop Pocket Guide (http://library.wlug.org.nz/show.pl?id=47) Linux in a Windows World (http://library.wlug.org.nz/show.pl?id=46) If you have any particular book you'd like WLUG to acquire, please make suitable edits to the http://www.wlug.org.nz/WantedBooks webpage. John

1 0

Different answers when trying to learn file numbers
by Leslie Katz 15 Dec '05

15 Dec '05

Thanks both to Oliver and to Aristotle for taking the trouble to reply to my query. I'll have to take Aristotle's word that the difference between my second and third results, as implied by Oliver, was caused by /proc and /sys "files", since I don't know how to act on Oliver's suggestion to exclude those "directories" from my command. I printed out and tried to read the entire man page for "find", but that didn't overcome my ignorance. Thanks again, Leslie

4 4

Different answers when trying to learn file numbers
by Leslie Katz 13 Dec '05

13 Dec '05

I wanted to discover the number of files on my system. I found on the Web the suggestion that the way to do so was to type in the Terminal, as user, "find / \! -type -d | wc -l" and then press "Enter". I did that. The names of quite a few files appeared on the screen, each with the words "Permission denied" after it, and then, ultimately, the number 153,406. I decided to issue the command as root instead, to see what happened. No file names appeared on the screen as they had before. I just got the number 154,821. That was 1,415 more than earlier, though the number of filenames which had appeared with "Permission denied" the first time round was nowhere near as many as 1,415. I next edited my sudoers file, so that, as user, I didn't need to enter a password in order to run "find". I then typed, as user, "sudo", followed by the command I'd typed twice before. That time, I got the number 154,722. Can anyone explain to me why I've been getting the different results that I have?

3 2

Re: [wlug] Internet Banking
by Matthew Browne (DSL HN) 12 Dec '05

12 Dec '05

> From: Bnonn [mailto:bnonn(a)orcon.net.nz] > > Generally speaking I really can't complain about ASB in any > way, except for that they run Windows in their branches ;) > Their support for alternative browsers is awsome, and their > Fastnet site is excellent. I don't know how much ASB had to do with the push for alternative browser support but I know it is something the developers of the Fastnet site were trying to do. I can't say for sure but most likely they are running Firefox themselves. Any in house stuff we do gets tested with IE, Firefox and Opera, and I've been pushing for Safari testing as well. Of those, supporting IE gives us the most trouble. Matt

1 0

Internet Banking
by David Bowen 11 Dec '05

11 Dec '05

Hi I remember some postings some months ago about not being able to log on to the ASB unless using Internet explorer. I heard today that Firefox 1.5 was able to log in. I tried it and it does. (under windows at least) I will try under Linux tomorrow. Yeh one less reason for using windows!! Another thing I haven't seen posted is an article I found in the Post DB Open Source Project, Run by an editor of the Bangkok Post, found here http://postdb.ricshreves.net/archives/ An interesting link to the NBR where The New Zealand State Service Commission is promoting use of the Open Source Content Management System Plone for other agencies. The story can be found here http://www.nbr.co.nz/home/column_article.asp?id=13734&cid=3&cname=Technology Maybe the politicians are listening? Regards David Bowen

4 3

\"People\'s Choice Community Member of the Year\"
by LUG Roundup 10 Dec '05

10 Dec '05

Only 6 days remaining to get your entries in. \"People\'s Choice Community Member of the Year\" is open to all within the Linux community. Closing Date is 16th December at 5pm. All entries are to be sent in writing to comp.lugroundup(a)k-sit.com Entries are to be submitted in the form of 500 words or less. You either enter yourself or nominate a person you feel is deserving of the title, detailing how they have contributed to the community. *Please include Name, *Email address for the entrant, *State and *Suburb. We have 4 independant judges that will be judging each entry on merit. The winner will be notified and announced in the final episode for the year on 24th December. The winner will recieve a concession ticket to LCA2006 in Dunedin and $200 cash to assist them in getting there. Don\'t forget you will need a passport to travel to New Zealand. Cherio, Karin (aka MotherLUG) http://mirror.linux.org.au/podcasts/la-update lugroundup(a)k-sit.com

2 1

ssh and cat problem
by Bnonn 08 Dec '05

08 Dec '05

Hi again everyone. In my continuing quest to automate absolutely everything about rebuilding one of my computers, I'm writing a script that will generate a key relationship between it and my laptop (which I use for remote backup sometimes). I'm able to create the public and private keys without problems, but when it gets to adding the public key to the laptop ("scarlet"), I run into an issue. I don't want to just copy the public key into ~/.ssh/authorized_keys2 on scarlet, because from an aesthetic point of view, and a portability point of view, that's just nasty. If authorized_keys2 exists already, I'll overwrite it and cause myself pain. So, I instead copy the public key into my home dir on scarlet (scp ~/.ssh/id_dsa.pub bnonn(a)scarlet:~/) However, I then want to append the contents of this key to the authorized_keys2 file in ~/.ssh/ on scarlet. Seems to me that the best way to do this is to simply cat it, since this will create the file if it doesn't already exist. I'm using the following command: ssh bnonn(a)scarlet cat ~/id_dsa.pub >> ~/.ssh/authorized_keys2 This, however, appears to have no effect at all. It doesn't return an error; it just quietly does nothing. Again, I apologize if this is again an example of my fundamental dimness, but any help would be appreciated. Regards, Bnonn

2 4

1/packet writing for cd 2/formating flash memory stick
by stephen pearce 08 Dec '05

08 Dec '05

Hi Can anyone help me here please. 1/ How do you do incremental writing to a cdrw under linux. I have a cdrw which was formated under windows .. used the INCDFS file system according to the properties report in wondows. With this I can then write, and delete files from the cd .. within windows .. as if it was a large floppy or removable hard disk. Under Fedora Core 4 the disk mounts ok and I can read the contents at anytime .. but I cannot do the incremental writing .. I have looked up linux references to this INCDFS using google and not found anything of significance. Any pointers to making cdrw work more adeptly would be appreciated. 2/ My 64Mb and 128 MB usb memory sticks mount fine under fedora core 4 and I can delete and write to the devices .. deleting I think puts the data into a trash directory .. but when I empty trash it does not seem to free space on the device .. also .. although ".Trash" appears when you mount it in Windows .. and you can delete the files and reclaim the space there .. .Trash does not appear in the Linux FS .. even using say mc which would normerly show ".--" directories . Also formating the flash memory does not seem straight forward .. I tried mounting with fdisk and deleting all partitions, making a siingle FAT32 partition .. then using format to format it .. unsuccessfully ... are there any tricks here? Formating under windows seems straight forward. Thanks Stephen

3 2

LUG Roundup Competition
by LUG Roundup 08 Dec '05

08 Dec '05

Hi Folks, Only 8 days left to get those entries in for the \"People\'s Choice Community Member of the Year\" award. Send your entries to me at comp.lugroundup(a)k-sit.com Cherio, Karin Purser lugroundup(a)k-sit.com http://mirror.linux.org.au/podcasts/la-update

1 0

LUG Roundup Competition
by LUG Roundup 08 Dec '05

08 Dec '05

Hi Folks, Only 8 days left to get those entries in for the \"People\'s Choice Community Member of the Year\" award. Send your entries to me at comp.lugroundup(a)k-sit.com Cherio, Karin Purser lugroundup(a)k-sit.com http://mirror.linux.org.au/podcasts/la-update

1 0

Adept crash- graceful resolution to debconf
by Chris O'Halloran 08 Dec '05

08 Dec '05

Having converted from Suse9.2 to Kubuntu I have appreciated the Adept front end to dpkg. However the other day, it locked up my machine so I crashed out of X and rebooted the system. However whenever I start Adept now it mentions that another process is in effect and that I need root permissions to run Adept. Having run Adept as root it still won't let me install further packages and when I try it reports debconf:DbDriver "config" /var/cache/debconf/config.dat dpkg:status database area is locked by another process dpkg run finished I assume the file "config" is locked by the aborted Adept process. I was wondering what the graceful way of resolving this problem Delete config.dat? BTW, I have been pretty impressed with Kubuntu Cheers Chris

2 3

nvidia-glx-legacy has gone from bad to worse
by zcat 07 Dec '05

07 Dec '05

When I first upgraded to breezy I was mildly annoyed that the nvidia drivers broke, I had to install nvidia-legacy instead, and that all of the openGL stuff stopped working although the driver appeared to be loading and xorg seems to think everything is in order. Programs like glxgears would tell me I didn't have GLX. Programs like mplayer would work with "-vo xv" which was good enough most of the time so I didn't worry about it too much. Just recently I thought I would try to sort this out properly. I removed all of the 'restricted' modules and glx stuff, including config, via synaptic, then cleanly reinstalled the nvidia-legacy kernel modules and nvidia-glx-legacy package. Now glxgears exits with a segfault. Worse, so does mplayer even when I use -vo xv and even if I'm trying to play some audio-only file (or even no file at all!) Where to I even begin trying to find out what's messed up and how to fix it?!

3 7

no audio input sources
by Jonathan Purvis 06 Dec '05

06 Dec '05

Aleisha's computer has a SoundBlaster Audigy and a fresh install of Kubuntu 5.10. When i load Audacity or any other sound recording program, no input sources are available. Where you'd expect to see "Microphone", "Line In", etc, the list is empty. If i turn up the volume on the microphone in alsamixer, i can hear it through the speakers. arecord claims to be recording, but the resulting .wav file is silent. Audio playback is fine with every program i've tried. Also on my computer with an nForce2 chipset, i can record via line in, but not microphone. This might be due to me plugging in a mono microphone plug into it and shorting something out. (Computer microphones seem to use a stero plug to provide power to the microphone.) Does anyone have any ideas? Thanks, Jon

2 2

gnome equivalent of kio_fish
by Glenn Ramsey 06 Dec '05

06 Dec '05

Hi, Does anyone know if there is a gnome equivalent to KDE's kio_fish? A quick Google seems to indicate that there are some tools but no exact equivalent. Glenn -- Glenn Ramsey <glenn(a)componic.co.nz> 07 8627077 http://www.componic.co.nz

4 6

Next meeting: Christmas Barbeque
by Craig Box 06 Dec '05

06 Dec '05

Hi everyone, The December WLUG meeting will be the annual end of year barbeque. This year the barbeque will be on Sunday 18 December, starting at around 2pm. The venue is the same as last time - Perry and Jamie's, 3 Liston Crescent. Due to the closeness to Christmas there will be no postponement if it's wet. Please check the website and mailing list before coming if you're in any way concerned about the weather. Please bring yourselves, partners [1], meat, alcohol, topics of conversation [2], and a passing interest in backyard cricket. WLUG will provide salad, bread and soft drinks as usual. You don't have to be a member to come to the barbeque, but if you aren't, it would be a really nice gesture to bring your $20 and sign up, wouldn't it? Hope to see you all there. Craig [1] Not all topics of conversation at WLUG barbeques are suitable for children. Some aren't even suitable for us. [2] Some comment was made in the last survey about some of the members being 'cliquey'. Two things are at play here; a lot of the WLUG regulars are friends outside of WLUG, and a lot of people go to barbeques and have weekends to get away from computers. Please don't expect all the topic to be about Linux. Probably, most of it will be about backyard cricket. Most of the people involved are easy to talk to, so please strike up conversations, and if there's anything that can be done to make the barbeque better, feel free to suggest it to someone who looks official.

1 0

Desktop internet dialler in Ubuntu 5.10
by Glenn Ramsey 05 Dec '05

05 Dec '05

Hi, In the weekend I installed Ubuntu 5.10 on my Dad's PC to replace Mandrake which didn't have support for all his hardware. It seems to have everything he needs except a sensible internet dialler. I was able to connect to the Internet by using the "Network settings" gui to configure the ISP parameters and then activate the modem device. But that seems like an odd way to dial up and isn't particularly obvious. I then installed GnomePPP but it didn't work. After some searching I discovered that it needs to have wvdial set up but that didn't work either due to the restrictive permissions of /etc/ppp/*secrets, and the wvdial man page just says "yeah we know about that and don't have a solution". I could probably fix that but I was expecting it to "just work". Whats up with that? I expected that an internet dialler frontend would have been part of the basic functionality. Did I screw up the installation in some way? I don't remember answering any questions that pertained to this. Glenn -- Glenn Ramsey <glenn(a)componic.co.nz> 07 8627077 http://www.componic.co.nz

2 2

help with network connection please
by John Torrance 05 Dec '05

05 Dec '05

I have installed Breezy badger on my other computer and was working well - I then moved the computer upstairs and now cannot connect to the network that I have. I had the same problem with windows and fixed this by changing the speed from 100BaseT full duplex to 10BaseT full duplex. I think that the problem is the poor quality of the network cable. How do I change the connection speed with Ubuntu? I am a newbie so will need simple instructions Thanks John

2 1

Re: [wlug] Desktop internet dialler in Ubuntu 5.10
by jaytee＠clear.net.nz 05 Dec '05

05 Dec '05

I was unable to find the applet. so far I am using a "pon' script because I could not get the correct modem setting into the network gui until I learn about "udev". Regards John ----- Original Message Follows ----- > > On Mon, Dec 05, 2005 at 08:36:29PM +1300, Glenn Ramsey > > wrote: Hi, > > > > In the weekend I installed Ubuntu 5.10 on my Dad's PC to > > replace Mandrake which didn't have support for all his > > hardware. It seems to have everything he needs except a > sensible internet dialler. > > There is a gnome panel applet for this - right-click on a > panel, and choose the "Modem Monitor" under the "System > and Hardware" grouping of applets. > > John > > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug > > [Attachment: jrm21(a)cs.waikato.ac.nz.sig]

1 0

[Fwd: Apache HTTP Server 2.2.0 Released]
by Oliver Jones 02 Dec '05

02 Dec '05

Nice shinny new software to play with... ;) Regards

1 0

Blinkers
by Craig Box 01 Dec '05

01 Dec '05

"OSDL shares desktop survey results": http://www.desktoplinux.com/news/NS5481370522.html Please specifically refer to http://www.desktoplinux.com/files/article019/osdl-dtl-survey-12.jpg. Craig

6 7

Competition
by Karin Purser 01 Dec '05

01 Dec '05

Hi All, Just a reminder to get those entries in for the "community member of the year" Send your entries to: comp.lugroundup(a)k-sit.com You don't have to have donated $5000 worth of computers or something huge to be eligable. In what ever way you or someone you know has contributed, no matter how small you think, we would love to read about it. Cherio, Karin. "May all you hopes and dreams be just around the corner" You can find the podcasts at http://mirror.linux.org.au/podcasts/la-update lugroundup(a)k-sit.com

1 0

Acceptable use of the WLUG Mailing List
by Meeting Reminder bot 30 Nov '05

30 Nov '05

The WLUG Mailing List is the discussion-list extension of the Waikato Linux Users Group (Incorporated). As such, we expect members of this list to adhere to the principles espoused in the official WLUG Charter[1], in particular, Rule 6, which covers the activities on this mailing list. While this is an Acceptable Use Policy, the WLUG Committee do recognise the need for informal discussion among list members, and draconian administration is not the goal here. Please keep in mind, however, that your comments to this list do represent the WLUG, and while it is good to be seen as an organisation with a sense of humour, some comments may do major harm to our credibility as a serious advocate of GNU/Linux and all things Free Software/ Open Source related. List discussion should * be honest * accentuate the positive, without hyperbole or blatant misrepresentation * maintain a reasonable level of spelling and grammar * not indulge in ad hominem attacks * not continue inflammatory or abusive threads * not be unprofessional or petty, especially with respect to the names of other software companies * not promote or denigrate political, cultural, or religious views * not indulge in marketing or advertising, other than on a private sale basis, or advertising of jobs - which may be announced once only * not reproduce copyrighted material without permission from the copyright holder * not defame any person or organisation Posters who consistently violate these guidelines will be dealt with at the discretion of the List Maintainer. If you feel you have been unfairly dealt with, you have recourse to any member of the WLUG Committee[2]. Certain mailing list etiquette should also be maintained: * please use only plain text (not HTML) * reply inline or below when quoting, rather than on top * trim quotes (don't reply quoting a 10 page message with a single line of reply) If you have any questions, start reading at http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html. These points have been established over a long time on this list. If you want to question them, please do it off list. As list users, use your discretion when pulling people up over etiquette - please reply off list, and if there is a serious breach, the list administrator will probably have dealt with it off-list already. [1] http://www.wlug.org.nz/WlugCharter [2] http://www.wlug.org.nz/WlugCommittee

1 0

Clearing out lots of old PC's
by Jamie Curtis 30 Nov '05

30 Nov '05

Hi all, I have a number of older PC's that I need to get rid of. All ran linux fine while in use. Most of these are yours for some small donation to WLUG. I just want them gone. First come, first served, e-mail me off list if you want one. Details on the wiki: http://www.wlug.org.nz/GarageSale Cheers, Jamie

2 1

sudo and writing to /var/log
by Bnonn 30 Nov '05

30 Nov '05

Hi everyone, I'm writing a small script to automate backing up to a remote machine using rsync. As part of the script, I'm directing stdout from rsync to /var/log/b.netbackup.log. The problem I'm having is in actually outputting said stdout. I run all my scripts with user privileges only, escalating to root only those commands within the script that need it. This has various benefits in my eyes: 1. Principle of least privilege; why run a whole script as root when you can just run certain bits of it? 2. No need to error-check UID=0 3. Anyone in the sudoers group can run the script. So normally I just type the script name from the dollar prompt, rather than sudoing it. Inside the script itself, rsync is run with sudo, so as to both read certain files in /etc/ which have 0600 umasks, and also to be able to output to the log file in /var/log. HOWEVER You would think (or at least, I do) that something like "sudo rsync options source destination >> /var/log/logfile" would NOT give you a permission denied error. Similarly with "sudo date > /var/log/logfile". But you would be dead wrong. Running the entire script with sudo (ie, sudo b.netbackup) will work fine, as will running it from a hash prompt. Anyone got any ideas why I can't write to a log file using sudo? Hopefully it isn't something really obvious that will demonstrate my fundamental lack of understanding of how Linux works... Regards, Bnonn

3 4

Re: [wlug] hoiho moving - service disruption
by Matthew Browne (DSL HN) 28 Nov '05

28 Nov '05

> From: Craig Box [mailto:craig(a)dubculture.co.nz] > > http://www.orcon.net.nz/images/international_traffic.gif > > You were saying? ;) > > They now (very rightfully) deprioritise P2P. I was taking that into account actually, they still aren't quite up to IHUG in terms of latency but it's nowhere near as bad as it used to be. I suspect IHUG already deprioritised P2P which would seem true if you try and use port 6881 for anything ;) Before Orcon started doing that they were having delays of up to 6000ms at peak times hitting overseas servers. It was virtually unusable for any real time applications (i.e. like gaming). Thankfully things have improved a lot now and the difference is slight. Matt

1 0

Re: [wlug] hoiho moving - service disruption
by Matthew Browne (DSL HN) 28 Nov '05

28 Nov '05

> From: Gavin Denby [mailto:redhat(a)ihug.co.nz] > > Hmm Methinks I should have a look at Orcon's plans. after all > the best support I could give would be to use them as my ISP, > and IHUG's recent cap reduction on my plan still sits poorly with me. Not to belittle Orcon's support of the LUG or their great no-cap policy but from my own experience and a group of Orcon/IHUG users I know, Orcon's latencies are a little lacking at times compared with IHUG's. This isn't a dig at Orcon, in fact more power to them I'd say. My respect for them has grown too hearing they are supporting the LUG. The truth is, most people would probably not even notice but it's better to say it up front now rather than have those few to whom low latencies matter switch only to have some trouble. I blame all the heavy downloaders that love Orcon's no-cap plans personally. One other thing worth mentioning, Orcon probably loses money on consumer broadband as most ISPs do. If you really want to support them financially, buy their dialup, tolls or hosting services. Matt Browne

2 1

WLUG Meeting is tonight
by Meeting Reminder bot 27 Nov '05

27 Nov '05

The WLUG meeting is this evening ---------------------------------------------------------------------- A WLUG meeting is booked for this date. Date: Monday 28 November Time: 7:30pm Location: J.1.10 at WaikatoUniversity If you're seeing this message, feel free to suggest or offer to present a meeting topic - the MeetingTopics page might be a good place to start.

1 0

LUG Roundup Competition
by Karin Purser 26 Nov '05

26 Nov '05

Hi All, The first competition for the LUG Roundup has been announced and is now open. "Community Member of the Year" is open to all within the Linux community. The competition was opened at last nights LA Live from SLUG. Closing Date is 16th December at 5pm. All entries are to be sent in writing to comp.lugroundup(a)k-sit.com Entries are to be submitted in the form of 500 words or less. You either enter yourself or nominate a person you feel is deserving of the title, detailing how they have contributed to the community. Please include Name, Email address for the entrant, State and Suburb. We have 4 independant judges that will be judging each entry on merit. The winner will be notified and announced in the final episode for the year on 24th December. The winner will recieve a concession ticket to LCA2006 in Dunedin and $200 cash to assist them in getting there. Don't forget you will need a passport to travel to New Zealand.

1 0

hoiho moving - service disruption
by Matt Brown 25 Nov '05

25 Nov '05

Hi All, As many of you probably know from previous posts to the list earlier this week hoiho's current hosting arrangements are coming to an end. Over the weekend we'll be moving hoiho from its current home at Tintz Digital to the Orcon Internet datacentre. Unfortunately most services offered by hoiho (HTTP, SMTP, POP, IMAP, etc) may be unavailable at various times over the course of the weekend. We are endeavouring to keep downtime to a minimum of course! Hoiho should be back up and running at full steam in its new home from mid Monday morning onwards. I'm sure I speak for everyone in the LUG when I extend a big thank you to Tintz for their generous hosting of hoiho to this point, and also to Orcon Internet for taking over the hosting of hoiho at this point. Sorry for the late notice about this change. If you have any questions or urgent problems over the weekend my contact details are below and please feel free to contact me. Kind Regards -- Matt Brown matt(a)mattb.net.nz Mob +64 275 611 544 www.mattb.net.nz

3 2

Meeting update
by Craig Box 25 Nov '05

25 Nov '05

There -will- be a meeting on Monday. Lindsay is currently trying to finalise plans for a keynote speaker to present to the WLUG; failing that please come along with a list of your favourite Linux tips/tricks, perhaps concentrating on anything you use and surprised that collegues and friends don't seem to be aware of. Craig

3 2

WLUG Meeting is on Monday
by Meeting Reminder bot 24 Nov '05

24 Nov '05

The WLUG meeting is on Monday ---------------------------------------------------------------------- A WLUG meeting is booked for this date. If you're seeing this message, feel free to suggest or offer to present a meeting topic - the MeetingTopics page might be a good place to start.

1 0

O3 - Open Source Enterprise Data Networking
by Daniel Lawson 24 Nov '05

24 Nov '05

Hi, As seen on /., a new open source magazine had it's first release today. The FTP servers are heavily overloaded, and the bittorrent was fairly slow, so I thought I'd link to a copy I've downloaded. http://www.meta.net.nz/~daniel/o3/

1 0

problems connecting to the website
by Raymond Burgess 23 Nov '05

23 Nov '05

Hey All. I have been having a lot of trouble connecting to the Wlug website recently. It's been at least a week, mayeb two since I remember being able to connect. I'm having the same problems from the Office and at home. I tried it from Olivers place last night and he also couldn't connect. Oliver has a different ISP. As I'm in Melbourne all of these attempts would probably use the same link to reach to New Zealand. All of these attempts where using Firefox. I have now attempted to view the site from a couple of US based machines using lynxs and from home using links and have had better success, although not what I expected. One of the US machines complained initially with [socket failed: family 10 addr 2002:d237:12fa::1 port 80.] this is probably due to having a badly setup ipv6 config. It then falls back to using ipv4 and works, but at bytes per second, 100 *bytes* per second. Which is very very slow. I see the same speed from the other machines, no ipv6 error tho. Has there been any changes made tot he server config in the last month? I know that another wlug list member was having trouble connecting earlier in the year which I think was resolved once their ISP fixed up some routing issue. I no longer have any NZ based shell accounts so I can't do any further testing, I assume it's ok inside NZ otherwise someone would have mentioned something earlier. Does anyone have any suggestions for diagnosing connectivity issues like these? I guess a step by step process for diagnosing such things would make a good page for the Wiki. Raymond

3 2

Here we go again...
by Craig Box 22 Nov '05

22 Nov '05

Another IE vulnerability. Are we all running Firefox yet? http://www.eweek.com/article2/0,1759,1891749,00.asp?kc=EWRSS03119TX1K000 0594 Craig

1 0

LA Live this Friday
by Karin Purser 22 Nov '05

22 Nov '05

Ladies and Gentlemen, I invite you to gather around your digital wireless this Friday night as episode ten of the Linux Australia Update is streamed live from the Sydney Linux User Group. That's right folks, we are going live starting at 19:00 EDST (16:00 WA. 18:30 SA/NT, 18:00 QLD). We will be featuring talks with both the Waughs, Jeff will be talking about his recent "Badger,Badger,Badger" Tour and Pia will be bringing us up to date on what is happening with Linux Australia. As if that wasn't enough, we have managed to rope Matt Palmer in to talk about Debian and we have a competition to announce. Not only that but we will also interacting with you dear listener through the miracle of IRC. Come along to the #slug channel on irc.freenode.net and join in the merriment as we go live. Links to the streams will be posted on http://live.slug.org.au closer to the date. -- James Purser Chief Talking Guy - Linux Australia Update http://k-sit.com - My Blog http://la-pod.k-sit.com - Linux Australia Update Blog and Forums Skype: purserj1977

1 0

Visio equivalent for Linux
by Ian McDonald 21 Nov '05

21 Nov '05

Folks, What do people use mainly? I was going to use Dia from Gnome but this project doesn't seem to be moving ahead so going to use kivio. I will update the Wiki with what I find. Requirements: - vector based as doing diagrams rather than pictures - ability to export to a format suitable for LaTeX (EPS or similar should be fine). Ian -- Ian McDonald http://wand.net.nz/~iam4 WAND Network Research Group University of Waikato New Zealand

3 5

Job vacancy
by Craig Box 20 Nov '05

20 Nov '05

IT Partners are looking for a systems administrator to work in a Linux/Unix/Windows environment, based in Hamilton. http://www.seek.co.nz/users/apply/index.ascx?JobId=5953462 All enquiries through the contacts listed on the ad, please. Craig

1 0

WLUG meeting is one week away
by Meeting Reminder bot 20 Nov '05

20 Nov '05

The Waikato Linux Users Group have a meeting in one week today. ---------------------------------------------------------------------- A WLUG meeting is booked for this date. If you're seeing this message, feel free to suggest or offer to present a meeting topic - the MeetingTopics page might be a good place to start.

1 0

Cool process utility
by Craig Box 18 Nov '05

18 Nov '05

Hate having processes die because of kernel upgrades? The thought of losing your irssi scrollback just too much for you? http://cryopid.berlios.de/ Compile (I needed zlib1g-dev on my Ubuntu machine which had build-essentials installed) and then run 'freeze' to save processes to disk. You start the process again by executing the file that it saves - there is no 'thaw' utility It can't save a screen session, but you can save the processes inside them and rescreen. Craig

7 6

Committee minutes
by Craig Box 17 Nov '05

17 Nov '05

Hi everyone, Committee minutes are now up at http://www.wlug.org.nz/CommitteeMeetingTopics.2005-11-17. Our potential speaker for November is unavailable, so if anyone wants to present a topic or can suggest someone who might be able to present a meeting, please contact me off-list. Thanks Craig (P.S. earlybird registrations for linux.conf.au close today. Pay now if you're going.)

1 0

NAT rule entry for DSL-302G modem
by Leslie Katz 17 Nov '05

17 Nov '05

On Wed, 16 Nov 2005 20:40:06 +0000, Camster342 <camster342(a)gmail.com> wrote: >Although not exactly a solution to the problem you're having with the >CLI, did you remember to save & reboot or at least save after you'd >entered the NAT rule? Thats been my downfall _many_ a time. Many thanks! The D-Link document, "Opening Ports in DSL-302G Modem", makes no reference to doing a separate save, but implies that clicking on "submit" once you've added your rule equals saving. As a result of what you wrote, I went back and read the modem manual. It wasn't very clear either about what you do once you've created a NAT rule, but other parts of it led me to believe that, when I'd added my rule, I should go to "Administration", "Save & Reboot" and then press "Save". I did that and now my rule survives powering off. Thanks again.

1 0

NAT rule entry for DSL-302G modem
by Leslie Katz 16 Nov '05

16 Nov '05

I'm sorry to bother people about this again. What I thought was a solution to an earlier problem turns out not to have been a permanent one. I wanted to open some ports in the above modem, but couldn't access the modem's internal web server using Firefox for Linux. I was, however, able to do so using Internet Explorer (on my dual-boot computer) and to create an appropriate NAT rule. Then, when I restarted the computer and booted into Linux, the rule I'd created in Windows persisted in Linux. However, when I later powered the computer (and modem) down and then powered up again, the rule I'd created was gone. Since the WLUG wiki page on the modem referred to using the CLI and to some material about doing so, I got that material and studied it. I then did the following: - booted into Windows; - (re)created my NAT rule via the Web interface; - restarted in Linux; - tested the rule, which worked; - opened the CLI and issued the command to get me the rule, which worked; - issued the command to delete the rule, which worked; - issued the command to (re)create the rule, which failed. Here's the output: ******************* Welcome to Titanium ******************* D-Link Corp., Software Release R2.01M.B34.AU(021206a/T93.3.44) Copyright (c) 2001-2002 by D-Link Corp. login: admin password: Login Successful $get nat rule entry ruleid 2 Rule Id : 2 Flavor : REDIRECTION Interface : ALL Protocol : ANY Local addr from : 10.1.1.3 Local addr to : 10.1.1.3 Dest addr from : 0.0.0.0 Dest addr to : 255.255.255.255 Global addr from : 0.0.0.0 Global addr to : 0.0.0.0 Dest port from : 5235 Dest port to : 5237 Local port : 0 $delete nat rule entry ruleid 2 Entry Deleted $create nat rule entry ruleid 2 rdr destportfrom 5235 destportto 5237 lcladdrfro m 10.1.1.3 lcladdrto 10.1.1.3 Error: Invalid command $ I then rebooted into Windows and tried to (re)create the rule via telnet. Again, I got the invalid command message. I then tried simply to create a rule which appeared in the material about using the CLI. It wouldn't work either. If anyone can give any suggestion about what I'm doing wrong, I'd be very grateful. Thanks. I don't know what I'm doing wrong.

2 1

Microsoft's marketing juggernaut
by Craig Box 16 Nov '05

16 Nov '05

How can we compete? I don't think I can ever advocate development on Linux again. http://www.microsoft.com/korea/events/ready2005/vs_song.asp Craig

1 0

Fwd: [lca-announce] linux.conf.au 2006: REMINDER: Early bird registrations
by Ian McDonald 15 Nov '05

15 Nov '05

---------- Forwarded message ---------- From: lca-announce-admin(a)lists.linux.org.au <lca-announce-admin(a)lists.linux.org.au> Date: Nov 15, 2005 9:29 PM Subject: [lca-announce] linux.conf.au 2006: REMINDER: Early bird registrations To: lca-announce(a)lists.linux.org.au 2006 - Dunedin, NZ! linux.conf.au is the annual Australian Linux technical conference, and is one of the largest gatherings of users and developers of Free and Open Source Software in the Southern Hemisphere. It is an opportunity for developers and groups to present their ideas amongst peers, and for the Free Software and Open Source communities to gather in general. Summary: Reminder: Early bird registrations close in 3 days! The 2006 conference is being held in Dunedin, New Zealand, at The University of Otago[1]. More information can be found on the conference website: http://lca2006.linux.org.au/ Early bird registrations for linux.conf.au 2006 close in 3 days! Hi folks, Just a quick reminder that early bird registrations for linux.conf.au 2006 close in just over three days, at midnight on Friday the 18th of November. Please be aware that this date and time is in NZDT, which is currently equivalent to UTC +1300. So, if you're keen to join us in January in Dunedin and wish to claim the early bird pricings on a Professional or Hobbyist registration, please head on over and register at: http://lca2006.linux.org.au/register/register.php If you've already registered, a reminder that to claim the early bird discount, your registration needs to be paid in full before midnight on Friday. See you in January! Please feel free to forward this announcement to your local LUG, or any other person or group that would be interested! [1]: http://www.otago.ac.nz/ Regards, Mike Beattie, linux.conf.au 2006 Organisers _______________________________________________ lca-announce mailing list lca-announce(a)lists.linux.org.au http://lists.linux.org.au/listinfo/lca-announce -- Ian McDonald http://wand.net.nz/~iam4 WAND Network Research Group University of Waikato New Zealand

1 0

Upcoming WLUG committee meeting (1 week today)
by Meeting Reminder bot 15 Nov '05

15 Nov '05

As per the WLUG charter, please note that there is a WLUG executive committee meeting one week from today. If you wish to get an item on the agenda for this meeting, please email it to secretary(a)wlug.org.nz. ---------------------------------------------------------------------- WLUG Committee Meeting To have something added to the agenda for this meeting, please email secretary @ wlug.org.nz. Provisional agenda: # Minutes from previous meeting # Matters arising # Correspondence # Treasurers report # General business

2 1

Installing Skype on Ubuntu [Rant]
by Mathew Carley 15 Nov '05

15 Nov '05

It seems to be to have more "stuff" with it: which may or may not be a good thing, depending on your opinion. Apps and Eye candy are also a bit helpful in the choice: not just for me, either. I will put it this way... with the exception of MPlayer (matter of preference for media players) and programs like Skype, there is very little else that needs to be installed on a brand-spanking new install of SuSE, and most of the dependancies for these programs (except maybe the Win32 codecs for MPlayer) are already included and configured with the System. As I said, I still like Ubuntu, and am now considering running Ubuntu on my laptop (lightweight distro, at least, until I put some more RAM in it) and SuSE on my desktop (When I build it). It is possible that I am biased because I am more familiar with SuSE than I am with Ubuntu - it is the distro that rescued me from the "Red Hat = Linux" mindset (RH was what I had been using for most of my "Linux life"). It is also the distro of choice when I install Linux for other people (if not only for the eye candy. In saying that, though, I don't see why I can't resurrect some old hardware with the aide of Ubuntu, given that SuSE can be a heavyweight on old systems, if the people whom I am moving off of Windows don't want to buy a Mac Mini or something. So yeah: After using Breezy for a couple of days, I do now like Ubuntu as a distro; despite my being a sucker for eye-candy, though if I end up using it more than a week (quite likely at this point), then I'll start customizing Gnome with some themes and custom icons and all that. Consider my rant over. I now like Ubuntu more than I did the other day. But I still like KDE as well - I'm sure I can add it on somehow (I use both UIs... they both have certain features I like about each one, so...) When I have time... Mathew > > However, all is well now (until my hard drive and more RAM arrives), > > at which time it will be a tougher decision than originally anticipated > to > > choose between SuSE 10 and Breezy. It hasn't taken long (or much) > > to like Ubuntu so far, though as a "full featured" distro, I will probably > > > end up with SuSE. > > I'm interested to learn in which way Ubuntu is not "full featured"? > > Craig -- Regards Mathew Carley HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Office Phone (Helsinki): +358 9 2316 3712 Cell Phone (Finland): +358 4 0816 2816 Cell Phone (France): +33 6 1811 9475 Skype: mgcarley The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

2 1

Linux for Grandmother
by Mathew Carley 15 Nov '05

15 Nov '05

Going on from my previous post, would you all mind if I sent my grandmother to the next installfest and/or meeting? I threw together a SuSE 9.1 Personal system on an old box just before I left NZ, and they took the box home from my parents place the other day. What they seem to use the computer for is: Internet Email Office (Writer, Calc, Impress mostly). Is there a publisher equivalent that you would recommend? I hate publisher myself, but... yeah. Not a whole lot else. I don't mind whether you leave SuSE on the box or if you "upgrade" it to Breezy, I am happy to support either from the other side of the globe. It needs to have **A VNC server installed and configured for me to be able to do this as well, so... yeah. **A nice, easy, clean, pretty interface. **I don't think it would have to be too similar to Windows 98. Box specification is (as I said, old) Cel366/128/6GB/CD, Modem, Sound Blaster 16... Used to be in mums shop before she upgraded. I'm sure she wouldn't mind paying for some tuition as well, but I have made the suggestion that she might go there. -- Regards Mathew Carley HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Office Phone (Helsinki): +358 9 2316 3712 Cell Phone (Finland): +358 4 0816 2816 Cell Phone (France): +33 6 1811 9475 Skype: mgcarley The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

1 0

Two new library books
by Craig Box 15 Nov '05

15 Nov '05

Hi everyone, Two new books arrived today, thanks to O'Reilly. Linux Desktop Pocket Guide: Advice for running five popular distributions (Fedora, Gentoo, Mandriva, SUSE and Ubuntu) on a desktop or laptop http://library.wlug.org.nz/show.pl?id=47 Asterisk: The Future of Telephony: Join the Open Source PBX Revolution http://library.wlug.org.nz/show.pl?id=48 Please use either of the links above if you'd like to borrow either book. Regards, Craig

1 0

Links in PhpWiki
by Chris O'Halloran 14 Nov '05

14 Nov '05

Hello, I have set up a Phpwiki using my Suse Linux Box on the company lan and using Apache, Php, MySql using the code from the Phpwiki site. I've manage to get it all going quite nicely many of the staff are keen to use it as a collaborative documentation site for keeping each other informed of the latest technical information available or the gotcha's you find working with different manufacturers equipment. I've got the linking to other pages, webpages and email addresses working fine. What I was know wanting to know was how to link to various documents etc we might have on our servers. It's an MS Active directories network. I can link to documents I put on the webserver easily enough but what about P:\Library\Electrical\Transpower\Standards\ABC.pdf Any hints appreciated. Chris -- http://homepages.maxnet.co.nz/dusky/ ICQ: 213449133 Jabber: cmoman1(a)jabber.org Jabber: cmoman1(a)jabber.meta.net.nz Yahoo: cmoman1

5 10

Re: [wlug] Installing Skype on Ubuntu [Rant]
by Mathew Carley 14 Nov '05

14 Nov '05

> > > Here's why I'm a bit frustrated at the moment with Ubuntu: > > >>I think it's a bit short sighted to blame your problems on a Ubuntu when > >>the problem is caused by a non-free application being distributed in > >>binary only form. The blame should be appropriately placed with Skype. You are quite right, perhaps I should have "blamed" Skype for the lack of appropriate support for a still young (yet surprisingly mature) distro. Keeping in mind it was a bit of a rant as to why (in this particular instance) I prefer(red) SuSE, and also this install of Ubuntu was to revive/choke out the last life of this laptops hard drive, and is not of any real importance, shall we say. I have since installed breezy, and had Skype working within minutes, all appropriate packages downloaded through Synaptic (yay no dpkg!) and so on. I've even changed totem-gstreamer to totem-xine with xine-ui and was able to get the multimedia stuff working quite quickly. I must say, 6 months of obviously hard work has made a huge difference to Ubuntu, and I must congratulate all who develop in and around it. > I wanted to install Skype. Skype is a KDE app, (and it looks ugly in > > Gnome - there are workarounds, but aside from that). It requires > > libqt3-xxxxxxxx. > > > > Firstly, I was trying to install it from the .deb package distributed > > on skype.com <http://skype.com> (skype_1.2.0.18-1_i386). > > >>Luckily, as fulfilling as it is to be a Free software zealot and say > >>it's all Skype's fault there are more pragmatic members of the community > >>who are happy to put time and effort into make non-free software like > >>Skype work seemlessly. My experience with Hoary was not nearly as pleasant as the one with Breezy. I must say that I much prefer Breezy over Hoary (surprised) and it is so much quicker than SuSE 9.3, but this may be due to the light-weight nature of the distro and the fact that I have bugger all installed on a clean (but slowly dying) hard drive and clean /home partition. To get Skype working nicely on Ubuntu you need to look no further than > the Ubuntu Guide (http://ubuntuguide.org) which links to nicely > built .debs for Ubuntu that I've used successfully from Warty -> Hoary > and now for Breezy. > > See specifically http://ubuntuguide.org/#skype Correct. Once again - instructions worked fine with Breezy, but not so well with Hoary. After reading the rest of your email and the packages you installed I'm > surprised that your box still works at all! So was I. In fact, I went so far as to leave the laptop on until I was able to download and burn the Breezy ISO the next morning (after some sleep). In saying that, I did end up having to reboot it, as for some reason it thought the CD-RW drive was busy, and, well, yeah. Believe it or not, the system did boot, apparantely without error; though there were a few complaints that it couldn't talk to locale (unsurprisingly). However, all is well now (until my hard drive and more RAM arrives), at which time it will be a tougher decision than originally anticipated to choose between SuSE 10 and Breezy. It hasn't taken long (or much) to like Ubuntu so far, though as a "full featured" distro, I will probably end up with SuSE. Or I could partition the drive and just have both, sharing a /home partition (with different user-folders) - Ubuntu for lightweight applications (eg when I'm on the tram and need to write down a URL, for example) and SuSE for my Development Stuff or something. -- Regards Mathew Carley HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Office Phone (Helsinki): +358 9 2316 3712 Cell Phone (Finland): +358 4 0816 2816 Cell Phone (France): +33 6 1811 9475 Skype: mgcarley The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

2 1

Ubuntu Breezy (5.10) CD's
by Jamie Curtis 14 Nov '05

14 Nov '05

I have just recieved an Ubuntu Breezy ShipIt delivery of CD's for distribution via the CS department here at Waikato. There are Ubuntu sets (one install, one live CD) for x86, x86-64 and Mac available. You can get yourself one by visiting the CS office on the 1st floor of G-Block at the Uni. Please only take as many CD's as you need, we do have a limited quantity. Cheers, Jamie

1 0

D-Link DSL-302G modem queries
by Leslie Katz 14 Nov '05

14 Nov '05

My apologies to all those who kindly replied to my post on the above subject for not acknowledging those replies sooner. I was required to be away from the computer for a few days. Encouraged by some of those replies to do so, I re-configured the modem in Windows, using the instructions from the D-Link Australia site. I then switched into Linux and found that the changes did what I'd hoped (at least for now!). My thanks to everyone.

1 0

Episode 9 of the LUG Roundup
by Karin Purser 14 Nov '05

14 Nov '05

Hi All, Episode 9 of the LUG Roundup is now available. This fortnight we speak with Matt Brown from Waikato LUG in New Zealand. Sorry for the lateness of the post to notify, but due to technical problems(my computer dying) mid week I lost everything. So you can find the pods at the following links http://mirror.linux.org.au http://la-pod.k-sit.com Cherio Karin lugroundup(a)k-sit.com

1 0

Installing Skype on Ubuntu [Rant]
by Mathew Carley 13 Nov '05

13 Nov '05

Today I "rescued" my laptop (temporary measure as it needs the hard disk replaced) by installing Ubuntu Hoary over what was SuSE 9.3. 1. Yes, I know I could get breezy. It would take <5 minutes to download on my connection here (Yay for 40 megabits). 2. SuSE 10 will be going on the new hard drive, anyway. [That DVD ISO took around 2 hours] Here's why I'm a bit frustrated at the moment with Ubuntu: I wanted to install Skype. Skype is a KDE app, (and it looks ugly in Gnome - there are workarounds, but aside from that). It requires libqt3-xxxxxxxx. Firstly, I was trying to install it from the .deb package distributed on skype.com <http://skype.com> (skype_1.2.0.18-1_i386). Err, no - turns out I needed libqt3c102-mt_3.3.4-3_i386. So I download it. I read that I can use libqt3-mt_3.3.5-1_i386 instead, which is supposed to be a better way... I thought hrm... I should only need this package and maybe one other... but no. Next, it tells me that I need (insert several GCC-related libraries and supporting packages * 6) Why is none of this mentioned on any of the forums I ended up going to? Long story short: Here is what I ended up downloading and installing with dpkg (and for some parts I used Synaptic, but I couldn't make a local repository? What about apt-get? Would that have made life easier?): cpp-4.0_4.0-0pre6ubuntu7_i386 gcc-4.0_4.0-0pre6ubuntu7_i386 gcc-4.0-base_4.0.2-3_i386 initrd-tools_0.1.81.1_i386 [and Ubuntu versions of initrd-tools 0.1.77 and 0.1.78; however they wouldn't work with libc6] libc6_2.3.5-6_i386 libfontconfig1_2.3.2-1_i386 libgcc1_4.0.2-2_i386 libqt3c102-mt_3.3.4-3_i386 [which was replaced with libqt3-mt_3.3.5-1_i386] libqt3-mt_3.3.5-1_i386 libstdc++6_4.0.2-3_i386 libxrender1_0.9.0-2_i386 nscd_2.3.2.ds1-20ubuntu14_i386 and of course skype_1.2.0.18-1_i386 Not only did I have to get the required versions of these files from ftp.fi.debian.org/ <http://ftp.fi.debian.org/>, but the Ubuntu versions were "outdated" in terms of version numbering. According to most of what I read, I should have just needed to resolve 1 or 2 things (ended up downloading the repackaged skype .deb from a link posted on the Ubuntu Forums). Now, aside from all that, when I went to install libc6_2.3.5-6_i386, I found it conflicted with initrd-tools. Which is a vital part of the OS, if I am not mistaken. However at some stage over the several hours I was installing and figuring all this out, it installed. At some stage Synaptic decided that it would be a good idea (well, it asked, and there didn't appear to be any "argh! don't do that!" option) to remove most of the base system because I no longer had initrd-tools. So I downloaded initrd-tools 0.1.81, installed that, but now I want to install things like locale, but it won't because it needs a whole lot of other things. I think if I reboot this machine it... well... won't. Perhaps I will download and install Breezy and give the same task a go. As I mentioned originally, installing Ubuntu on this hard-drive was just a temporary measure so that I could at least browse the net. I like Ubuntu, but I felt that I really had to stuff around to get this app installed (and even then it doesn't seem to quite work correctly). Did I just have a bad experience (that perhaps I shouldn't have?) Maybe I have been somewhat spoiled by SuSE, and I don't use Debian-based Distros that often, so I'm not as used to them, but has anyone else experienced similar problems? This is the part where you all go: you didn't need to do all that, you should have .... :-) -- Regards Mathew Carley HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Office Phone (Helsinki): +358 9 2316 3712 Cell Phone (Finland): +358 4 0816 2816 Cell Phone (France): +33 6 1811 9475 Skype: mgcarley The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

10 9

Re: [wlug] wlug Digest, Vol 173, Issue 12
by Mathew Carley 13 Nov '05

13 Nov '05

>Did you check that this package was compiled for your distribution? >Ie was that .deb for ubuntu hoary, or was it for debian sarge? .deb is >just a packaging format, it doesn't magically work on any computer that >can install .deb files, just like you can't assume a Red hat .rpm will >work on mandriva. See http://www.skype.com/products/skype/linux/ Debian package <http://www.skype.com/go/getskype-linux-deb> (7.7 MB) Xandros, MEPIS, Ubuntu, other Debian-based distros Apparantely it was. Whether or not "Debian-based distros" is accurate is up to the development team. After reading a bit, I downloaded a version from ubuntuforums.org<http://ubuntuforums.org>that someone had re-compiled to work "correctly" with Ubuntu - which still didn't seem to work. >What provider offers 40mbit connection(s) in NZ ? Seems a rather odd >shape for bandwidth allocation. 1. No bandwidth provider offers 40mbit connections in New Zealand. I am currently living in Finland. 2. Yes, you are correct, it is unusual. I think it's actually rated at 48Mbits, but I typically get around 4000 *kilobytes* per second in actual download speed (total). I posted a screenshot of my downloading of the Breezy ISO from Denmark (not using a download manager other than the one that comes with firefox). The file came in at a measly average of 2950 kilobytes per second. (I have also used Ibiblio.org <http://Ibiblio.org> and got similar speeds). The screenshot is at http://www.mathew-carley.com/images/screenshot.png. >Sometimes Debian packages will work on Ubuntu, but that is only >coincidence. >If a package doesn?t work because it was made for Debian, not >Ubuntu, don?t even dream of installing other Debian packages to >make it run. You?ll tear up your system, but you won?t achieve a >working install. I figured that I was having a problem such as this, but wanted to see how far I could take it and if I could actually get it to work. I can load up skype and see my buddy list, but if I want to use voice or even text chat? Forgetaboutit! -- Regards Mathew Carley HostENZ Data Services A Carley Network Media Ltd. (NZ) Company http://www.hostenz.co.nz mathewc(a)hostenz.co.nz Office Phone (Helsinki): +358 9 2316 3712 Cell Phone (Finland): +358 4 0816 2816 Cell Phone (France): +33 6 1811 9475 Skype: mgcarley The information contained in this electronic mail message and any attachments are confidential to Carley Network Media Ltd and it's subsidiaries, and may contain proprietary information or may be legally privileged. See http://www.cnmltd.net/email/ for our standard email disclaimer. Errors & Omissions Excepted. Prices in this email do not include GST unless stated otherwise.

1 0

D-Link DSL-302G modem queries
by Leslie Katz 12 Nov '05

12 Nov '05

I use the above modem, connected to my Ethernet port, with Fedora Core 3, kernel version 2.6.12-1.1378. I wanted to try out an application called Qnext, which is, among other things, a videoconferencing application. However, it insisted that the ports it required on my machine for incoming communications were not accesible by external contacts. Looking for the reason why that was, I found at the Australian D-Link site information about opening ports in the modem and realised that that was my problem. The D-Link information was for Windows only, so I looked on the Web to try to find information applicable to Linux. That led me to the WLUG Wiki page on the DSL-302G. That page contains the fullest information available on the topic, at least according to my Google searches I'm posting this because I'm hopeful that a subscriber to the list has followed the instructions on the Wiki page successfully to open a port. Unfortunately, I haven't even been able to take the first step, accessing the modem's internal web server. My Linux browser is Firefox. When I ask it to go to 10.1.1.1, I'm prompted for the user name and password and I give those and press Enter. Then, the browser says that it's waiting for 10.1.1.1 and never connects. My computer is dual-booting and my Windows browser is Firefox too. I tried to access 10.1.1.1 with it and had exactly the same result. I also have Internet Explorer and when I go through the same routine with it, I get the modem's internal web server instantaneously. Here are my questions: 1. Is there some thing I should be doing to access the server in Linux Firefox? 2. If I can't use Linux Firefox, is there some other browser anyone's used successfully? (I tried lynx, but it wouldn't work, I suppose because of the need for username and password. Maybe one can add those to the lynx command string, but that's way beyond my capabilities.) 3. Finally, I don't understand the effect of changing settings on the modem, but is it possible that changing them through Windows, which I think I could manage, would change them for Linux too? (I don't know how to express the idea technically correctly, but are those changes somehow internal to the modem and independent of the operating system used with the modem?) If anyone can give me information on any of the above questions, I'd be very grateful. Leslie PS: Ian McDonald, who kindly directed me to this list, said he thought that there'd been some discussion on this list recently about my modem. I searched for "302" by thread for each month for 2005, but found nothing. Perhaps the thread didn't make reference to that number. In any event, if you see this, Ian, I wouldn't want you to think I didn't bother trying the archives first.

12 13

debianhelp new website - www.debianhelp.co.uk
by gg gg234 09 Nov '05

09 Nov '05

Hi, This new website is having some basic information about debian and still it is under development stage and you can post your comments about this website .This website might help for some users. www.debianhelp.co.uk Best regards

3 4

Totem Music Player
by Ivan Potgieter 09 Nov '05

09 Nov '05

Craig Box wrote: > Gstreamer in Breezy isn't all that good at keeping sync with all files. > Try using mplayer or totem-xine. Totem-xine did the trick. Just use synaptic to install it and it works well. Many thanks, Ivan

1 0

greig mcgill
by David Nicholls 08 Nov '05

08 Nov '05

sorry this is a bit off topic but can you please contact me greig? the contact details i have for you are a bit stuffed and i need to have a quick chat please. cheers... David Nicholls Computer Support Consultant d.nicholls at waikato.ac.nz School of Science & Engineering / Dept of Chemistry The University of Waikato Hamilton, New Zealand

1 0

Totem Music Player
by Ivan Potgieter 08 Nov '05

08 Nov '05

Aristotle Pagaltzis wrote: > What codec is in use? As noted before, I'm using various gstreamer0.8 plug-ins. > MPlayer often has synch problems with Real-encoded films I am not using MPlayer and I'm not sure what Real-encoded refers to. > ... sometimes the file is really screwy ... These all play correctly on my Win2k PC, so it's not the files themselves. The files-types I've tried inlcude: mp3, mp3, mpg, avi, wmf, mpe, and others. I have tried as many as I can, but they all have the audio playing about 0.5 - 1 sec after the video. Ivan

3 3

Totem Music Player
by Ivan Potgieter 07 Nov '05

07 Nov '05

Hello all, I've just tried to play a video clip on Totem Music Player (Ubuntu 5.10/Gnome) and the audio is not synched with the video. I have installed various gstreamer plug-ins. Has anyone else experienced this? What can be done to correct this? Regards, Ivan

3 2

FW: Linux Research - Request For Assistance
by Craig Box 03 Nov '05

03 Nov '05

Another message for the LUG from afar. Craig ________________________________ From: Andi Mann [mailto:amann(a)enterprisemanagement.com] Sent: Friday, 4 November 2005 9:55 a.m. To: secretary(a)wlug.org.nz Subject: Linux Research - Request For Assistance Hi, I am a Senior Analyst for Enterprise Management Associates (www.enterprisemanagement.com) a leading IT analyst firm, covering Systems Management technology. We are doing an in-depth research paper on Linux server management, and would like your help to survey the members of the Waikato Linux Users Group. We have posted a web survey, and I would like you to forward this email to your members, asking them to complete the survey. Each survey should take about 10 minutes. The URL for the survey is: http://www.emausa.com/surveys/ema_lsurvey.htm The proposition I am researching is that the total cost of ownership (TCO) for large-scale commercial Linux systems is declining due to availability of more powerful management tools; and that Linux TCO is equal to or less than that of Windows. It is in reaction, in part, to 2004 studies from Meta Group, Yankee, and Microsoft claiming Linux has higher management costs, and higher TCO, than Windows. My research aims to find out if the availability of better management tools has further reduced the cost of Linux ownership. In return, we would be happy to provide any respondents with the completed report. We think this will be a very significant paper, which will help you and your members present independent validation of Linux cost advantages. I would appreciate your help. Please let me know if you have any questions or comments. Thanks, Andi.

1 0

FW: O'Reilly UG Program MAKE Magazine Holiday Offer
by Craig Box 03 Nov '05

03 Nov '05

Hi all, O'Reilly sponsor our group with regular book donations to our library (whenever we order them, hint hint John :) In return, please consider supporting them. Craig -- From: Marsee Henon Hello, Here is a special offer for you to share with your group members. Please pass it along through your newsletters, email lists, or distribute at your next meeting. ***Give the Gift of MAKE Magazine*** Give the geek on your list a truly unique gift this holiday season-- their very own subscription to MAKE magazine. MAKE is the first magazine devoted to digital projects, hardware hacks, and DIY inspiration. Each rich issue brings the do-it-yourself mindset to all the technology in your life. You have a choice: Give a gift for $5 off the regular gift subscription rate--$29.95 (US), $34.95 (Canada), $44.95 (all other countries): <https://www.pubservice.com/mk/SubGiftSplash.aspx?PC=MK&PK=U5OUGA> To place your gift order at the regular price $34.95 (US), $39.95 (Canada), $49.95 (all other countries)--and get a MAKE T-shirt free. <https://www.pubservice.com/mk/SubGiftSplash.aspx?PC=MK&PK=U5OUGB> For more information on MAKE or to read the MAKE Blog, go to: http://makezine.com/ **Please note gift postcards and MAKE vol 4 will begin mailing on 12/9/05, orders received after 12/9/05 and non-US orders may not arrive in time for the holiday season. Your recipient(s) will receive the opportunity to add digital access to their subscription. All MAKE T-shirts will ship to your billing address. To order multiple orders for multiple countries, please contact customer service at 1-866-289-8847 (US & Canada), 1-818-487-2037 (all other countries) between the hours of 5am to 5pm San Francisco time or Email: MAKE(a)espcomp.com Thanks and have a wonderful holiday season, Marsee Henon ================================================================ O'Reilly 1005 Gravenstein Highway North Sebastopol, CA 95472 http://ug.oreilly.com/ http://www.oreilly.com ================================================================

1 0

[Fwd: Request to fill-in a questionnaire on Linux.]
by Lindsay Druett 01 Nov '05

01 Nov '05

---------------------------- Original Message ---------------------------- Subject: Request to fill-in a questionnaire on Linux. From: "Ajith Kumar" <Ajith.Kumar(a)boppoly.ac.nz> Date: Wed, November 2, 2005 12:23 pm To: lindsay(a)wired.net.nz -------------------------------------------------------------------------- Hi Lindsay, I'm Ajith Kumar, IT Tutor at Bay of Plenty Polytechnic, Tauranga. I'm doing my Master's Thesis & the topic is on migration of operating system from Microsoft to Linux. Since you are the President of the Waikato Linux Users Group, I was wondering if you'll be able to help me find a few Linux users to fill in my questionnaire, which is online. If I'm not asking for too much would you be able to pass on the information and ask your Linux user group members / friends / colleagues / acquaintances (who work on Linux) to spare 10 minutes to out my questionnaire? The questionnaire can be accessed by clicking the link: http://www.bcs.net.nz/~ajithk/MComp.htm <http://www.bcs.net.nz/~ajithk/MComp.htm> . It shouldn't take more than 10 minutes to complete it. I would also like to find out if some of them would be interested / available for an interview at a later stage. Thanks in advance for your support, appreciate it. Regards, ******************************* Ajith Kumar, IT Tutor, Bay of Plenty Polytechnic, Tauranga, New Zealand. Phone: (+64) 7 5440920 (Extn: 5591) E-mail: ajith.kumar(a)boppoly.ac.nz <blocked::mailto:ajith.kumar(a)boppoly.ac.nz> *******************************

1 0

Survey results
by Craig Box 01 Nov '05

01 Nov '05

Thanks to everyone who filled in the survey prior to the last AGM. I have published the results, in the format as they were presented at the AGM (along with my speaking notes), on the WLUG website: http://www.wlug.org.nz/archive/survey/2005-wlug-survey.pdf Please contact me if you have any further questions; I am happy to clarify certain points if required, but will not publish individual responses. Regards, Craig

1 0

Fwd: [nznog] Update to Telecom Xtra DNS servers
by Ian McDonald 01 Nov '05

01 Nov '05

For people's info as this may affect you (or your friends) if DNS is not congifured correctly. ---------- Forwarded message ---------- From: Ted Grenfell <Ted.Grenfell(a)telecom.co.nz> Date: 02-Nov-2005 08:52 Subject: [nznog] Update to Telecom Xtra DNS servers To: NZNOG <nznog(a)list.waikato.ac.nz> As part of our ongoing DNS service improvements, Telecom is making some changes to it's DNS servers which will affect some non-Telecom customers. The following Xtra name servers will in future only accept queries from Non-Telecom customers for domains that the name servers are authoritative for. Recursive queries for other domains (e.g. www.google.com) will no longer work. * dnsh1.xtra.co.nz ( 202.27.184.3 ) also known as alien.xtra.co.nz * dnsh2.xtra.co.nz ( 202.27.184.5 ) also known as terminator.xtra.co.nz We will be phasing in these changes from November 15th over a period of several weeks and you may wish to alert your help desks to check the DNS settings of users having problems after that. Currently Xtra operates the following recursive DNS services: * dnsc1.xtra.co.nz ( 202.27.158.40 ) * dnsc2.xtra.co.nz ( 202.27.156.72 ) We are happy for external people to query those IP's for DNS troubleshooting and similar purposes but they should not be directly configured into machines. Please note these IP's may change from time to time and external access may be limited or withdrawn without prior warning (especially in cases of abuse). Regards, -- Ted Grenfell, ISP Performance Manager, IS Online Services, Telecom NZ Ltd Mob: +64 274 435 455; DDI: +64 9359 5854; Fax: +64 9377 0781; Pager: +64 2611 1445 ICQ: 191891; MSN Messenger: cameleon @ xtra.co.nz Level 11, 8 Hereford St, Private Bag 92028, Auckland CBD, New Zealand "today was so quiet, you could hear a packet drop" - Tom Liston, ISC Handler's Diary This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002. _______________________________________________ NZNOG mailing list NZNOG(a)list.waikato.ac.nz http://list.waikato.ac.nz/mailman/listinfo/nznog -- Ian McDonald http://wand.net.nz/~iam4 WAND Network Research Group University of Waikato New Zealand

2 1

Could not determine the server's fully qualified domain name
by Chris O'Halloran 31 Oct '05

31 Oct '05

Hello all, Just wondering if anyone might be able to give me some clues here. I started Apache on my system and the following error was returned. Apache seems to operate okay but I was getting a similar kind of error in the log files when I was running Privoxy, an advertisment and cookie crunching proxy server. When the proxy server was operating it was this error that kept slowing the response of the server. /etc/init.d/apache2 start returned 0 (success): Starting httpd2 (prefork) ..done httpd2-prefork: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName Any clues? DNS, host file problem. Running Suse 9.2 on PIII on a company lan. No firewall running on machine. Cheers Chris -- http://homepages.maxnet.co.nz/dusky/ ICQ: 213449133 Jabber: cmoman1(a)jabber.org Jabber: cmoman1(a)jabber.meta.net.nz Yahoo: cmoman1

3 3

Acceptable use of the WLUG Mailing List
by Meeting Reminder bot 31 Oct '05

31 Oct '05

The WLUG Mailing List is the discussion-list extension of the Waikato Linux Users Group (Incorporated). As such, we expect members of this list to adhere to the principles espoused in the official WLUG Charter[1], in particular, Rule 6, which covers the activities on this mailing list. While this is an Acceptable Use Policy, the WLUG Committee do recognise the need for informal discussion among list members, and draconian administration is not the goal here. Please keep in mind, however, that your comments to this list do represent the WLUG, and while it is good to be seen as an organisation with a sense of humour, some comments may do major harm to our credibility as a serious advocate of GNU/Linux and all things Free Software/ Open Source related. List discussion should * be honest * accentuate the positive, without hyperbole or blatant misrepresentation * maintain a reasonable level of spelling and grammar * not indulge in ad hominem attacks * not continue inflammatory or abusive threads * not be unprofessional or petty, especially with respect to the names of other software companies * not promote or denigrate political, cultural, or religious views * not indulge in marketing or advertising, other than on a private sale basis, or advertising of jobs - which may be announced once only * not reproduce copyrighted material without permission from the copyright holder * not defame any person or organisation Posters who consistently violate these guidelines will be dealt with at the discretion of the List Maintainer. If you feel you have been unfairly dealt with, you have recourse to any member of the WLUG Committee[2]. Certain mailing list etiquette should also be maintained: * please use only plain text (not HTML) * reply inline or below when quoting, rather than on top * trim quotes (don't reply quoting a 10 page message with a single line of reply) If you have any questions, start reading at http://www.gweep.ca/~edmonds/usenet/ml-etiquette.html. These points have been established over a long time on this list. If you want to question them, please do it off list. As list users, use your discretion when pulling people up over etiquette - please reply off list, and if there is a serious breach, the list administrator will probably have dealt with it off-list already. [1] http://www.wlug.org.nz/WlugCharter [2] http://www.wlug.org.nz/WlugCommittee

1 0

[0T] Linux work available for student or anyone else
by Richard Hayes 31 Oct '05

31 Oct '05

Dear List, I have need of some Linux hacking experience There two different projects. 1. open EMR a)Install and configure openEMR b)Create Debian Package for openEMR c)Customise PHP for different look http://sourceforge.net/projects/openemr 2. InfraRed data capture Using LINC / IrDa-Utils etc to pack sniff an IR signal and translate it into text. Signal source is Roche Blood Glucose monitor. Windows software exist but I do not want a windows computer just to record blood sugars. http://freshmeat.net/projects/lirc/ http://irda.sourceforge.net/ Anyone interested please contact me off-list. regards, ---- Richard Hayes Nada Marketing www.nada.com.au PO Box 12 Gordon Australia 2072 Tel:+(61-2) 9412 4367 Fax: +(61-2) 9412 4920 Mob:+(61) 0414 618 425

1 0

WLUG Meeting is tonight
by Meeting Reminder bot 30 Oct '05

30 Oct '05

The WLUG meeting is this evening ---------------------------------------------------------------------- !! IanMcDonald presents "Contributing to Open Source Projects". Date: Monday 31 October Time: 7:30pmhttp://www.wlug.org.nz/1 Location: I.G.02 (http://www.wlug.org.nz/LitB) at WaikatoUniversity In his presentation, Ian will cover: * wiki-ing * !SourceForge * source code management systems * writing documentation * use of mailing lists (including warnings about flames etc) * submitting code It is aimed at all levels - everyone, even if they can't code, can contribute by testing, documenting etc. Ian has returned to PhD studies at WaikatoUniversity after 15 years in the IT workforce. His research is on congestion control in networking and has contributed to many open source projects, notably including the http://www.wlug.org.nz/DCCP protocol for Linux, which is currently being merged into the main Linux kernel. ---- MeetingTopics http://www.wlug.org.nz/1 As previously discussed at the AGM, all meetings from now on will be held at 7:30pm, as the reasons for holding them earlier in winter no longer apply.

1 0