- wlug - list.wlug.org.nz

Building a WPA2 access point
by Ian McDonald 20 Jul '06

20 Jul '06

Interesting article here at linux.com: http://www.linux.com/article.pl?sid=06/07/10/1729226 -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

SCO OpenServer 5
by zcat 19 Jul '06

19 Jul '06

If anyone has the install disk(s) for SCO OpenServer, I would be very interested in getting hold of them. I'm trying to migrate someone from a legacy system to Linux and it would be very handy (almost essential!) to set up a mirror of their current server to work with.

2 3

router disconnecting
by Haldor Riddering 19 Jul '06

19 Jul '06

Hi people, okay I had a big crash and lost loads of data in windows plus system got trashed so decided to give ubuntu dapper a go on my laptop. no worries after much hacking away got everything working how I want it. now however there is a problem. I have a dlink dsl-302g modem. now whenever I run the laptop after a few minutes the router disconnects then reconnects and this happens again and again whenever the laptop is on. it doesn't happen with my windows machines and if I turn the laptop off the connection is constant for 24+ hours. I emailed the slingshot help desk and they say it's a line fault and it's going to cost $88 to have it looked at. but it only happens when the laptop is on the network. any ideas about whats happening here? I'm very happy with ubuntu, just frustrated with the disconnects. I have tried a second dsl-302g so it's not the router and the internal network works flawlessly just the internet connection is screwy. Cheers Haldor

1 0

Warren Hughes (IBM) is travelling.
by Warren Hughes 19 Jul '06

19 Jul '06

I will be out of the office starting 19/07/2006 and will not return until 24/07/2006. Hi, thanks for your email. I'm out of the office until Monday 24/7. I will be checking my voicemail and email. Cheers, Warren

1 0

Local Linux training
by Eric Light 19 Jul '06

19 Jul '06

Hi all, My name is Eric, I've been following this list for about two years now but haven't had occasion to actually make a post until now... I've been looking for a training institute which offers a course towards the CompTIA Linux+ certificate. I was offered a scholarship in Auckland for such a course, but I'm really looking for somewhere in Hamilton. My experience with Linux is minimal - I've installed a few older versions of Mandrake in the past, and more recently got most of a server going with Ubuntu. But I still honestly don't really know what I'm doing, and most of the time I rely on programs which feature a GUI. I'd like to get away from that. I've called Hamilton Business School (http://www.hbsc.co.nz/index.asp?PageID=2145824273) who seem to be the only ones in Hamilton offering the course, but their Linux tutor has recently left the company and so they're not offering the course at the moment. Does anyone know of a Hamilton training provider where I could do something along the lines of a 20-week course via Student Loan? Thanks in advance, - Eric Light

2 1

Squid content admin tool
by Ian McDonald 18 Jul '06

18 Jul '06

Folks, I'm just being lazy here and not looking it up myself. Can anyone tell me a good squid admin tool that allows to alter whitelisted and blacklisted URLs by user/group? I can just alter the config files I know but it'd be nice to have a web front end to it. Would be cool if it has reporting too but that's not a major. Ian -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

Xen news
by Ian McDonald 17 Jul '06

17 Jul '06

>From http://www.osnews.com/story.php?news_id=15210 Lots of news on Xen. Firstly, "This is a document about how to set up XEN and iSCSI on 3 Debian Stable machines so that you can have a virtual host that can be migrated live between 2 of the machines. The third machine will be the common disk for the virtual machine that is seen via the 2 machines running XEN." Secondly, "IBM and Novell are throwing their considerable weight behind Xen, but some experts are suggesting that these companies may be pushing this nascent technology too far too fast." Lastly, "You can now run OpenSolaris domains under Xen as dom0 with OpenSolaris domUs too." To get to the stories mentioned here go to the osnews URL. -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

ANNOUNCE: WLUG meeting is one week away
by Meeting Reminder Bot 16 Jul '06

16 Jul '06

The Waikato Linux Users Group have a meeting in one week from today: ---------------------------------------------------------------------- Our July guest is Roger de Salis, a director of http://www.wlug.org.nz/FxNetworks. FX Networks are a http://www.wlug.org.nz/Wellington company with significant http://www.wlug.org.nz/Unix and http://www.wlug.org.nz/Cisco Networking experience. The principals of FX have over 50 years experience in the IT and Telecommunications industry, the bulk of which is about continuously available on-line systems for public use. They specialise in bringing interesting technical ideas to market. FX believe you should be able to get connectivity far greater than what is currently available in New Zealand, and have made great investment in a fibre network around New Zealand. They're also pioneers in the use of http://www.wlug.org.nz/VoIP. If you're interested in the InterNet or telephone calls, this is a meeting not to be missed!

1 0

Re: [wlug] hosts file
by David Bowen 16 Jul '06

16 Jul '06

David wrote Hi After playing with my networking settings in Breezy, I seem to have lost some data from my /etc/hosts file. Partly it requires editing to add to add "ubuntuDavid" to it. However without it I can't log in as root to edit it. Can't find password! I can't edit it with Knoppix, I don't have permission. Is there any way to edit it or is it a reinstall job. As it is I can't connect to the net or anything requiring root privilege. Thanks David Bowen > Shane wrote: > > Hi Dave, > The file probably needs permissions changed for it to be edited under knoppix > chmod a+w /mount/drive/etc/hosts > > If this still doesnt work, its time to boot to single user mode <g> > This should give you some direction > from > http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/s1-res… > > Select Ubuntu with the version of the kernel that you wish to boot and type e > for edit. You will be presented with a list of items in the configuration > file for the title you just selected. > > Select the line that starts with kernel and type e to edit the line. > > Go to the end of the line and type single as a separate word (press the > [Spacebar] and then type single). Press [Enter] to exit edit mode. > > Back at the GRUB screen, type b to boot into single user mode. > > Then edit your file > > Regards > Shane > > *Thanks Shane. Changing the permissions worked. Thinking about it My command was probably trying to execute the file rather than open it and root did not have permission to execute it. I will look at the book I have at work to look into that next week. Then I can change the permission back again! I have to admit I tend to use command line only when necessary, but I am starting to get the hang of it Thanks all for the help. * > > >> >> > Here's a possibility: > > root doesn't have a password set at all under ubuntu. Instead, log in as > your user and run 'sudo nano /etc/hosts', and enter *your* password > in. This assumes that your account is the first one that was created > when you installed the machine. > > If this doesn't work, it possibly means that more than the hosts file > has become corrupted. Consider upgrading to dapper at about this point. > *Nope that didn't work either Fortunately the message at boot pointed to /etc/hosts and I just basically copied it from my dapper install and it all worked.* >> I can't edit it with Knoppix, I don't have permission. Is there any way >> to edit it or is it a reinstall job. >> >> > > With knoppix you'd still need to run a root terminal, instead of just > the normal one. > > *Yup I had tried that* > > ------------------------------ > > Message: 4 > Date: Sun, 16 Jul 2006 10:49:27 +1200 > From: zcat <zcat(a)wired.net.nz> > Subject: Re: [wlug] hosts file > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Message-ID: <44B970F7.4020706(a)wired.net.nz> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > >> With knoppix you'd still need to run a root terminal, instead of just >> the normal one. >> >> > You also need to mount the filesystem read-write, knoppix defaults to > mounting things read-only. > > The GUI way; right-click the icon for your filesystem, unmount if it's > already mounted, then chose the option for mounting read-write. > > The root-terminal way; mount /mnt/hda1 -o remount,rw > (I forget exactly where knoppix mounts things and /mnt/hda1 is a > guess... substitute the actual mountpoint here) > > And as Daniel says, you'll need to edit the file as root too. > > *Yup I had done that, It was HDA3 as it is dual bootede with that other OS* > > ------------------------------ > > >

1 0

Command line help for new users
by jaytee＠clear.net.nz 16 Jul '06

16 Jul '06

Hello all, I stumbled across this excellent resource for new users while searching for the answer to another problem. It is possible that we have this info in our Wiki but I did not find it yet. The thread is nine pages long and has a couple of other good links within it if anyone wishes to take the time to study it. http://www.ubuntuforums.org/showthread.php?t=73885 Please add more links that may be appropriatte. Regards John

1 0