December 2008 - wlug - list.wlug.org.nz

Remote adminstration
by cmoman 05 Oct '10

05 Oct '10

Hello all, Is there a tool in ubuntu that a user can start that reports the real world ip address and configures a home router to open a port to allow remote administration? I have a friend or two for whom it would nice to get them to start a program, report to me the details via MSN or Skype or telephone etc and allow me to log in and fix or make a configuration change to their machine. I know how to set things up using ssh etc but that relies on some initial configuration at the their end. KDE has a nice VNC invite function but it won't do the router config part. It appears the likes of KTorrent and Azuereus have the ability to do some to the router via UPnP to open ports up on the router dynamically so I am guessing all this is possible. Cheers

6 6

Re: [wlug] benq scanner install
by jaytee＠clear.net.nz 23 Mar '09

23 Mar '09

Hi Glen, Did you make a typo? snapscan scanscan?? John ----- Original Message Follows ----- > hi all > > I am installing my Benq scanner, and I have run into some > trouble. I have listed my installation steps and terminal > output: > > System: Ubuntu 5.10 > > Kernel:2.6.12-9 386 > > Scanner: BENQ 4300U > > Flatbed scanner > USB 1.0 > Powerpack 16v(a)1.0A > > 1. Before plugging scanner in: tail /var/log/messages > > glenn(a)glenn:~$ tail /var/log/messages > Nov 21 21:14:08 localhost kernel: [4311704.892000] usb > 1-1.2: USB disconnect, address 3 > Nov 21 21:14:10 localhost kernel: [4311707.716000] usb > 1-1.2: new low speed USB device using uhci_hcd and address > 16 Nov 21 21:14:11 localhost kernel: [4311707.901000] > input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on > usb-0000:00:07.2-1.2 Nov 21 21:14:11 localhost > input.agent[12936]: tsdev: already loaded Nov 21 > 21:14:11 localhost input.agent[12936]: mousedev: > already loaded > Nov 21 21:14:11 localhost input.agent[12936]: evdev: > already loaded Nov 21 21:14:11 localhost usb.agent[12951]: > usbhid: already loaded Nov 21 21:14:12 localhost > input.agent[13046]: evdev: already loaded Nov 21 > 21:14:12 localhost input.agent[13052]: evdev: already > loaded Nov 21 21:14:12 localhost input.agent[13113]: > evdev: already loaded glenn(a)glenn:~$ > > 2. When scanner is recognised upon plugging in: > > glenn(a)glenn:~$ tail /var/log/messages > Nov 21 21:14:11 localhost kernel: [4311707.901000] input: > USB HID v1.11 Mouse [Logitech USB Optical Mouse] on > usb-0000:00:07.2-1.2 Nov 21 21:14:11 localhost > input.agent[12936]: tsdev: already loaded Nov 21 > 21:14:11 localhost input.agent[12936]: mousedev: > already loaded > Nov 21 21:14:11 localhost input.agent[12936]: evdev: > already loaded Nov 21 21:14:11 localhost usb.agent[12951]: > usbhid: already loaded Nov 21 21:14:12 localhost > input.agent[13046]: evdev: already loaded Nov 21 > 21:14:12 localhost input.agent[13052]: evdev: already > loaded Nov 21 21:14:12 localhost input.agent[13113]: > evdev: already loaded Nov 21 21:17:31 localhost kernel: > [4311908.671000] usb 1-1.4.1: new full speed USB device > using uhci_hcd and address 17 Nov 21 21:17:32 localhost > usb.agent[13207]: libusbscanner: loaded successfully > glenn(a)glenn:~$ > > 3. lsusb > > glenn(a)glenn:~$ lsusb > Bus 001 Device 017: ID 04a5:20b0 Acer Peripherals Inc. > (now BenQ Corp.) S2W 3300U/4300U > Bus 001 Device 016: ID 046d:c019 Logitech, Inc. > Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. > Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. > Bus 001 Device 001: ID 0000:0000 > glenn(a)glenn:~$ > > 4. Checked /proc/bus/usb/devices to see if the scanner was > recognised and had loaded a driver (driver=(none) in my > case. > > glenn(a)glenn:~$cat /proc/bus/usb/devices > T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 17 Spd=12 > MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 > #Cfgs= 1 P: Vendor=04a5 ProdID=20b0 Rev= 1.20 > S: Manufacturer=Color > S: Product= FlatbedScanner 22 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff > Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms > glenn(a)glenn:/proc/bus/usb$ > > 5. As a normal user, run xsane from the terminal: > > glenn(a)glenn:/proc/bus/usb$ xsane > > ERROR MESSAGE: Failed to open device > 'snapscan:libusb:001:017': Invalid argument. > > 6. Run scanscan from the terminal: > > glenn(a)glenn:/proc/bus/usb$ snapscan > bash: snapscan: command not found > > This is where I get into trouble as I cannot run apt-get > on my 5.10 machine and can't figure out what to do next. > > Glenn. > > > > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

4 6

Network Configuration
by Glenn Stuart Morrissey 01 Jan '09

01 Jan '09

Hey all I have tried unplugging the network cable from the back of the machine and re-plugging it in, I have used a different port on my switch, which I have previously used and know it works well. Firts thing i did was ping 192.168.0.1 (my internet sharing machine), and was told that the network was unreachable. I have tried using a fixed ip address (192.168.0.5 and 255.255.255.0 subnet mask), still no joy. Network is unreachable. So, after this, I tried with the command sudo ethtool eth0, which returned with the output: glenn(a)glenn-amd1: [sudo] password for glenn: sudo:ethtool:command not found. glenn(a)glenn-amd1: This is the directory /etc/network glenn(a)glenn-amd1:~$ cd /etc glenn(a)glenn-amd1:/etc$ cd network glenn(a)glenn-amd1:/etc/network$ ls if-down.d if-post-down.d if-pre-up.d if-up.d interfaces glenn(a)glenn-amd1:/etc/network$ cat interfaces auto lo iface lo inet loopback I then tried removing the interfaces file, in the event that I could start over, but still no luck. when I run dhclient I get: glenn(a)glenn-amd1:/etc/network$ sudo dhclient Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/pan0/92:93:61:a0:d3:80 Sending on LPF/pan0/92:93:61:a0:d3:80 Listening on LPF/eth0/00:0d:87:35:aa:32 Sending on LPF/eth0/00:0d:87:35:aa:32 Sending on Socket/fallback DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on pan0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. glenn(a)glenn-amd1:/etc/network$ Maybe I just have a faulty network adaptor on the motherboard. But if that was the case, wouldn't it NOT be displayed with lspci? Glenn.

4 5

Media Player
by Andrew Crosby 31 Dec '08

31 Dec '08

Hi i am trying to make a headless media player; it would be nice if it could do the following: Play headless have an HTML/Web interface for making and loading play lists be able to rip cds automatically be able to stream music to other devices be able to serve general files (samba) be able to be used by non Linux users (flatties) Ideas? Cheers Andrew

3 2

Network settings
by Glenn Stuart Morrissey 31 Dec '08

31 Dec '08

Happy new year all I am trying to configure my network connection on my amd desktop machine, but it wont auto detect and there is no roaming mode (im running a newly installed Ubuntu 8.10 Intrepid OS. I have the output from ifconfig: glenn(a)glenn-amd1:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0d:87:35:aa:32 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:23 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:250 errors:0 dropped:0 overruns:0 frame:0 TX packets:250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15684 (15.6 KB) TX bytes:15684 (15.6 KB) pan0 Link encap:Ethernet HWaddr 92:93:61:a0:d3:80 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) glenn(a)glenn-amd1:~$ I also have the correct output line from lspci output: 00Ethernet Controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) Am I right in thinking the Hwaddr in eth0 should be something like 192.168.0.x? If so, can anyone tell me where the file is in the system so that I can edit it with the correct settings. Thank you Glenn.

5 4

Linux innovations of 2008
by Ian McDonald 31 Dec '08

31 Dec '08

http://www.phoronix.com/scan.php?page=article&item=great_linux_innovations_… -- Web: http://wand.net.nz/~iam4/, http://www.jandi.co.nz Blog: http://iansblog.jandi.co.nz

1 0

Interesting package manager
by Ian McDonald 23 Dec '08

23 Dec '08

Haven't heard of Nix before and sounds interesting concept: http://www.linux.com/feature/155922 (See on OSNews). Sounds a little Gentoo like as it implies it downloads and compiles the packages.. -- Web: http://wand.net.nz/~iam4/, http://www.jandi.co.nz Blog: http://iansblog.jandi.co.nz

1 0

Sun Provides 64-bit Java Plug-In For Linux
by cmoman 18 Dec '08

18 Dec '08

http://www.phoronix.com/scan.php?page=news_item&px=NjkyOQ Might be of interest.

1 0

Fwd: [FSF] Free Software Foundation Files Suit Against Cisco For GPL Violations
by Bruce Kingsbury 14 Dec '08

14 Dec '08

Oh dear. Any [CiscoNut]s want to comment on this? Linz? ---------- Forwarded message ---------- From: Brett Smith <brett(a)fsf.org> Date: 2008/12/12 Subject: [FSF] Free Software Foundation Files Suit Against Cisco For GPL Violations To: info-press(a)gnu.org, info-fsf(a)gnu.org, info-gnu(a)gnu.org ## Free Software Foundation Files Suit Against Cisco For GPL Violations BOSTON, Massachusetts, USA -- Thursday, December 11, 2008 -- The Free Software Foundation (FSF) today announced that it has filed a copyright infringement lawsuit against Cisco. The FSF's complaint alleges that in the course of distributing various products under the Linksys brand Cisco has violated the licenses of many programs on which the FSF holds copyright, including GCC, binutils, and the GNU C Library. In doing so, Cisco has denied its users their right to share and modify the software. Most of these programs are licensed under the GNU General Public License (GPL), and the rest are under the GNU Lesser General Public License (LGPL). Both these licenses encourage everyone, including companies like Cisco, to modify the software as they see fit and then share it with others, under certain conditions. One of those conditions says that anyone who redistributes the software must also provide their recipients with the source code to that program. The FSF has documented many instances where Cisco has distributed licensed software but failed to provide its customers with the corresponding source code. "Our licenses are designed to ensure that everyone who uses the software can change it," said Richard Stallman, president and founder of the FSF. "In order to exercise that right, people need the source code, and that's why our licenses require distributors to provide it. We are enforcing our licenses to protect the rights that everyone should have with all software: to use it, share it, and modify it as they see fit." "We began working with Cisco in 2003 to help them establish a process for complying with our software licenses, and the initial changes were very promising," explained Brett Smith, licensing compliance engineer at the FSF. "Unfortunately, they never put in the effort that was necessary to finish the process, and now five years later we have still not seen a plan for compliance. As a result, we believe that legal action is the best way to restore the rights we grant to all users of our software." "Free software developers entrust their copyrights to the FSF so we can make sure that their work is always redistributed in ways that respect user freedom," said Peter Brown, executive director of the FSF. "In the fifteen years we've spent enforcing our licenses, we've never gone to court before. We have always managed to get the companies we have worked with to take their obligations seriously. But at the end of the day, we're also willing to take the legal action necessary to ensure users have the rights that our licenses guarantee." The complaint was filed this morning in United States District Court for the Southern District of New York by the Software Freedom Law Center, which is providing representation to the FSF in this case. The case is number 08-CV-10764 and will be heard by Judge Paul G. Gardephe. A copy of the complaint is available at <http://www.fsf.org/licensing/complaint-2008-12-11.pdf>. ### About the FSF The Free Software Foundation, founded in 1985, is dedicated to promoting computer users' right to use, study, copy, modify, and redistribute computer programs. The FSF promotes the development and use of free (as in freedom) software -- particularly the GNU operating system and its GNU/Linux variants -- and free documentation for free software. The FSF also helps to spread awareness of the ethical and political issues of freedom in the use of software, and its Web sites, located at fsf.org and gnu.org, are an important source of information about GNU/Linux. Donations to support the FSF's work can be made at <http://donate.fsf.org>. Its headquarters are in Boston, MA, USA. ### About the GNU General Public License (GNU GPL) The GNU General Public License (GPL) is a license for software. When a program is released under its terms, every user will have the freedom to share and change it, no matter how they get it. The GPL is the most popular free software license in the world, used by almost three quarters of all free software packages. The FSF recently updated the license to address new concerns in the free software community; version 3 of the GPL (GPLv3) was released on June 29, 2007. ### About the GNU Operating System and Linux Richard Stallman announced in September 1983 the plan to develop a free software Unix-like operating system called GNU. GNU is the only operating system developed specifically for the sake of users' freedom. See <http://www.gnu.org/gnu/the-gnu-project.html>. In 1992, the essential components of GNU were complete, except for one, the kernel. When in 1992 the kernel Linux was re-released under the GNU GPL, making it free software, the combination of GNU and Linux formed a complete free operating system, which made it possible for the first time to run a PC without non-free software. This combination is the GNU/Linux system. For more explanation, see <http://www.gnu.org/gnu/gnu-linux-faq.html>. ### Media Contacts Brett Smith Licensing Compliance Engineer Free Software Foundation +1 (617) 542 5942 x18 <brett(a)fsf.org> ### _______________________________________________ info-fsf mailing list info-fsf(a)gnu.org http://lists.gnu.org/mailman/listinfo/info-fsf -- This email is for the intended recipient only. If you are not the intended recipient you must burn your computer, while standing on one foot and chanting the entire jabberwocky. The opinions expressed here are not necessarily the opinions of the person who expressed them.

2 2

Calender software
by Glenn Ramsey 14 Dec '08

14 Dec '08

Hi, Does anyone know of software that will allow you to make a calender using your own pictures that can be printed out? I have searched a bit but the results are swamped by schedule/meeting type calender software. I am aware of a command line app that generates calenders in postscript that I used a while back but I can't remember a) what it was called and b) whether it could add a picture. Anyone have any ideas? Cheers Glenn -- Glenn Ramsey <glenn(a)componic.co.nz> 07 8627077 http://www.componic.co.nz

5 7