July 2007 - wlug - list.wlug.org.nz

Job position: Research Programmer/System Administrator
by Marcel van de Steeg 01 Aug '07

01 Aug '07

Hi, I'm leaving my current position at the University of Auckland on the 9th of August, if anyone is interested, here is the job-description: http://www.vacancies.auckland.ac.nz/positiondetail.asp?p=5350 and the closing date is 11 August. Please circulate this to anyone who may be interested. It might not be clear from the job-description, but most of the work is Linux and Mac OS X based (command line only, heh :), the amount of Windows administration is almost non-existent. Thanks, Marcel -- Marcel van de Steeg, Research Programmer Bioinformatics Institute Room 110-281, Level 2, Thomas Building The University of Auckland, New Zealand Ph 09 373 7599 Ext 83777 Fax 09 367 7136 -- http://www.bioinformatics.org.nz http://www.biomirror.org.nz -- "Take your protein pills and put your helmet on..."

2 1

Wireless tool for Debian/Ubuntu
by Ian McDonald 30 Jul '07

30 Jul '07

This looks quite nice if you're having troubles with wireless: http://www.linux.com/feature/118224 -- Web1: http://wand.net.nz/~iam4/ Web2: http://www.jandi.co.nz Blog: http://iansblog.jandi.co.nz

1 0

Update on new Copyright bill
by Ian McDonald 30 Jul '07

30 Jul '07

Good summary here at NZ Herald: http://www.nzherald.co.nz/section/story.cfm?c_id=5&objectid=10454704&ref=rss -- Web1: http://wand.net.nz/~iam4/ Web2: http://www.jandi.co.nz Blog: http://iansblog.jandi.co.nz

1 0

Saturday workshop
by Roderick Aldrdge 27 Jul '07

27 Jul '07

The next workshop is on Saturday 4th August at the IT Training and Education Centre, 17 Devon Road, Frankton from 10am to 4pm. Three (of many) reasons to come to the workshop: 1. Bring somebody to show Linux in action and, if they like it, help them install it - getting off to a flying start. 2. Learn more yourself and/or sort out any problems and become more productive. 3. Help those who come along to learn. Many thanks to Simon, Bruce and Chris for help last time, and to Michael Denigan for the use the use of the facilities at IT Training. This is probably our last chance to use these facilities, so make the most of it while you can.

2 1

Webmin and alternatives
by Glenn Enright 25 Jul '07

25 Jul '07

Hi there, I'm currently developing a system that will provide some infrastructure for an IT team, specifically along the lines of network management. I've come across Webmin[1] and Ganymeade[2]. Does anyone here have experience with either of these platforms or good alternatives that I could look at? Gotchas encountered etc? Anything considered at this time, although inexpensive/free is definately a plus. [1]http://www.webmin.com/index.html [2]http://tools.arlut.utexas.edu/gash2/ -- See my blog at http://snap-happy3216.blogspot.com

1 0

Topics for Aug meeting to be announced.. would you consider Funky Penguin presentation on wireless penetration / defense?
by David Young 25 Jul '07

25 Jul '07

Hi WLUGgers :) As you know, I'm a South African Linux geek. My wife and I are coming over in August on a "prospecting" trip, before making our final decision about immigration. I know WLUG is the most active of the NZ LUGs, and I'm really keen to attend the meeting on the 27th. In fact, if you'll have me, I can give an interesting practical presentation on wireless network penetration / defense. (Since according to the website, the topic is yet-to-be-announced). There are other topics I get excited about, if wireless is old news : http://dave.blogs.funkypenguin.co.za/2007/07/10/professor-penguin-i-could-g… So, wlug, will ya have me? :) -- Regards, David Young [image: David Young's Facebook profile]<http://www.facebook.com/p/David_Young/580695413> [image: my blog] <http://feeds.feedburner.com/%7Er/FunkyPenguiNZ/%7E6/1> [image: My status] <skype:funkypenguin?add>

2 1

Asterisk setup job
by Jonathan Purvis 25 Jul '07

25 Jul '07

Hi, My work is looking for someone to set up an Asterisk system for us. We need: 5-10 external analog lines 5-10 internal handsets 20-30 computers voice menus voice mail routing We'd also like the potential for linking with customer database, eg type in customer id, get voice message of balance. If you're interested and have experience in setting up something like this at least once, email me offlist. Thanks, Jon

3 2

Re: [wlug] wlug Digest, Vol 193, Issue 17
by David 25 Jul '07

25 Jul '07

> > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 23 Jul 2007 14:14:56 +1200 > From: elroy <elroy(a)ihug.co.nz> > Subject: Re: [wlug] Ubuntu Dapper 6.06 ==> Feisty? 7.10 - CD-ROM Drive > not recognised > To: Waikato Linux Users Group <wlug(a)list.waikato.ac.nz> > Message-ID: <46A40F20.9020909(a)ihug.co.nz> > Content-Type: text/plain; charset="us-ascii" > > Glenn Enright wrote: > > >> On 21/07/07, elroy <elroy(a)ihug.co.nz> wrote: >> >> >> >>> Hi all. >>> Basically it boots from CD fine, but fails to recognise the >>> CD-ROM drive - is it not recognising the IDE controller? >>> >>> >>> >>> >> You wont be able to use the cdrom drive for anything else if thats the >> drive you booted from. Is this what you mean? The OS image will be >> mounted from the drive, so it wont be separately visible. If you >> booted successfully, then the drive must of been supported. >> >> >> >> > Hi. > > When attempting to install from the Alternative CD: > > (Ubuntu 7.04? Alternate CD? - ('uname -r' gives 2.6.20-15-generic kernel > version when booted from the problem CD)) I can start the install > process (i.e. choose to install in txt mode, kernel loads, can choose my > language OK, detect/configure keyboard OK, i.e. the install process is > running), but when I get to 'Detect and Mount CD-ROM' the install cannot > proceed with "No common CD-ROM drive was detected". > > > > Some further info I just acquired which I will research later tonight: > > > From the DMESG output: > > " > ... > scsi3: pata_marvell > BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 > 0B:00 0C:00 0D:00 0E:00 0F:00 > ATA: Abnormal status 0x7F on port 0x0001ac07 > scsi4: pata_marvell > BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 > 0B:00 0C:00 0D:00 0E:00 0F:00 > ATA: Abnormal status 0x7F on port 0x0001a807 > ... > " > > > lspci | grep Marvell finds: Marvell Ethernet1/RAID/Ethernet2 > > lspci | grep RAID gives: "02:00.0 RAID bus controller: Marvell > Technology Group Ltd. Unknown device 6145 (rev a1)" > > > Note that all of the above info was from the "2.6.20-15-generic" kernel > which I assume is from the Ubuntu 7.04 Alternate CD. > > > Cheers for any help. > > Elroy. > I was just thinking, dangerous I know, could it be part of the same kernel bug that causes 7.04 to fail to mount VCD's Most discs mount OK but with VCD's it seems to suddenly think it is a SCSI drive? A known Feisty bug. I believe it is a kernel issue where they merged SATA and PATA drivers so the PATA won't become unsupported as they become obsolete. David

2 1

Unforking of KDE and KHTML
by Ian McDonald 24 Jul '07

24 Jul '07

Interesting read in light of yesterday's discussion at meeting: http://arstechnica.com/journals/linux.ars/2007/07/23/the-unforking-of-kdes-… -- Web: http://wand.net.nz/~iam4/ Blog: http://iansblog.jandi.co.nz WAND Network Research Group

1 0

Ubuntu Dapper 6.06 ==> Feisty? 7.10 - CD-ROM Drive not recognised
by elroy 23 Jul '07

23 Jul '07

Hi all. I have an Asus P5WDG2-WS-Pro, and am having trouble trying to install a version of Ubuntu I got from the last WLUG install meet - (This is the Feisty 7.04 Alternative CD I believe - will need to double-check this). Basically it boots from CD fine, but fails to recognise the CD-ROM drive - is it not recognising the IDE controller? I will try to sort out a dmesg from when I boot the 7.04 CD. The strange thing is that Dapper 6.06 Live CD boots from same CD-ROM, and happily installs from the same CD-ROM - any recommendations on things to try? Mobo chipset info: North Bridge: Intel 975x South Bridge: Intel ICH7R PCI-X: 6702PXH DMESG Stuff: Linux version 2.6.15-28-686 (buildd(a)terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu May 10 09:56:30 UTC 2007 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 233 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: probing with STATUS(0x50) instead of ALTSTATUS(0x0a) hda: probing with STATUS(0x51) instead of ALTSTATUS(0x0a) hda: probing with STATUS(0x51) instead of ALTSTATUS(0x0a) hda: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a) hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x0a) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: bus type scsi registered libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF8876900 ctl 0x0 bmdma 0x0 irq 58 ata2: SATA max UDMA/133 cmd 0xF8876980 ctl 0x0 bmdma 0x0 irq 58 ata3: SATA max UDMA/133 cmd 0xF8876A00 ctl 0x0 bmdma 0x0 irq 58 ata4: SATA max UDMA/133 cmd 0xF8876A80 ctl 0x0 bmdma 0x0 irq 58 ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48 sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5d80 ata1: dev 0 configured for UDMA/133 sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5d80 scsi1 : ahci ata2: no device found (phy stat 00000000) scsi2 : ahci ata3: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000 ata3: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48 sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5d80 ata3: dev 0 configured for UDMA/133 sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe5d80 scsi3 : ahci ata4: no device found (phy stat 00000000) scsi4 : ahci Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Driver 'sd' needs updating - please use bus_type methods SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 sd 1:0:0:0: Attached scsi disk sda SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 3:0:0:0: Attached scsi disk sdb Probing IDE interface ide1... Cheers, Elroy.

4 6